Search Results for mechanical components

Wieland-K75 is an improved copper alloy with uniformly dispersed precipitates for relaxation strength. The alloy is used in electro-mechanical components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-666. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

BERYLCO NICKEL ALLOY 440 is an age-hardenable nickel-beryllium-titanium alloy that offers high strength, excellent spring properties outstanding formability, good high-temperature mechanical properties, and resistance to corrosion and fatigue. Complex shapes can be produced in the solution-treated (soft) condition and then aged to a minimum tensile strength of 215,500 psi. It is used for mechanical and electrical/electronic components in the temperature range -320 to 800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-94. Producer or source: Kawecki Berylco Industries Inc.. Originally published September 1964, revised September 1975.

NITRONIC 32 is basically a low-nickel chromium-manganese austenitic stainless steel strengthened by an addition of nitrogen. It has annealed strength approximately two times that of AISI Type 304 stainless steel and comparable corrosion resistance. It is used in such applications as fasteners, springs, antennae, shafting and pole-line hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-320. Producer or source: Armco Steel Corporation, Advanced Materials Division.

AISI 1118 is a low carbon steel containing relatively high manganese and sulfur to provide free-machining characteristics. It is resulfurized coarse-grain type of steel. AISI 1118 is commonly used to produce carbunized components and parts but can be used without carburizing for some applications that do not require a hard surface. Among its many uses are bushings, gears, pins, shafts, and nuts and bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-91. Producer or source: Carbon steel mills. See also Alloy Digest CS-55, August 1974.

ANACONDA Alloy 1870 is a free-cutting high-conductivity copper. It is a deoxidized copper with lead added to impart free-cutting properties. The various and unusual properties of Alloy 1870 make it suitable for many applications in the manufacture of parts machined from rods and for current-carrying studs, nuts and bolts designed for use at normal temperatures. Because it is deoxidized, it is not susceptible to hydrogen embrittlement if heated in a reducing atmosphere. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-318. Producer or source: Anaconda American Brass Company.

Sandvik APM 9980 is a low-carbon martensitic stainless steel with high mechanical properties. APM 9980 is a martensitic stainless steel specially designed for those applications requiring high mechanical properties combined with improved corrosion resistance relative to traditional martensitic steels. Note: This material is made by hot isostatic pressing of components. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1298. Producer or source: Sandvik Materials Technology and Sandvik AB Sweden.

Virgo 15.5PH is a 15Cr-5Ni-3Cu-0.3Nb alloy that is precipitation hardening. It is martensitic and combines high mechanical properties with medium corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-929. Producer or source: Industeel USA, LLC.

Copper Alloy No. 411 is brass with a small addition of tin. It has good formability, weldability and corrosion resistance and is recommended for such applications as bearings, bushings, jewelry and stamped hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-296. Producer or source: Brass mills.

MEEHANITE GE is a medium strength iron having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, pump bodies, valve bodies, steam cylinders, cylinder liners, casings, cylinder heads, and governor frames. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on casting, heat treating, and machining. Filing Code: CI-12. Producer or source: Meehanite Metal Corporation.

APEX TERNALLOY 7 is one of a family of three APEX TERNALLOYS; see also APEX TERNALLOY 5 (Alloy Digest A1-273, revised March 1987) and APEX TERNALLOY 6 (Alloy Digest A1-277, February 1987). It can be hardened by aging at room temperature without a solution treatment and offers high mechanical properties. It has good castability, excellent machinability and high resistance to corrosion. TERNALLOY 7 has many uses including aircraft components, gears machinery parts, fittings, valves and ornamental products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Al-279. Producer or source: Apex International Alloys Inc..

AL TECH POTOMAC A has well-balanced strength and toughness which make it especially suitable for a wide variety of hot-die steel applications, including those involving severe coolants. Its outstanding mechanical properties make it useful for many non-tooling requirements such as aerospace components. For more specialized needs, the manufacturer offers special melting processes that enhance this steel's fatigue properties and transverse tensile ductility. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-478. Producer or source: AL Tech Specialty Steel Corporation.

ATLANTIC 8A Alloy is a cast manganese bronze offering an excellent combination of mechanical properties and resistance to corrosion in fresh and sea water. It is used for applications such as gears, marine hardware and waveguide components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-303. Producer or source: Atlantic Casting and Engineering Corporation.

STROLOY 787 is an age-hardenable, high-strength, low-alloy steel with excellent low-temperature toughness and weldability. It is suitable for mechanical or pressure tubing applications in most of the tube sizes produced by the manufacturer. It is an excellent choice for fabrication of structural components or for use in pressure tubing subjected to a low-temperature environment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-345. Producer or source: Babcock & Wilcox Company.

TECHALLOY 36 Alloy is an iron-nickel alloy that has a thermal expansion rate about 10% of the rate for carbon steel up to 400 F. It provides the lowest thermal expansion rate of all similar types of alloys. It has fairly good room-temperature mechanical properties in the annealed condition: a tensile strength of 71,000 psi and an elongation of 41%; also, it is tough at cryogenic temperatures. Among its many applications are electronic components, cryogenic parts and aircraft controls. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-58. Producer or source: Techalloy Company Inc..

MUELLER Alloy 6970 (formerly MBCo. alloy 804) is a wrought alloy having excellent corrosion resistance when used with water and steam. It has good mechanical properties, excellent wear resistance and good machinability. These properties make it an ideal material for valve components. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-364. Producer or source: Mueller Brass Company.

AISI No. 685 is a high-temperature, high-strength, cobalt-base alloy. It responds to an age-hardening heat treatment. At elevated temperatures it has high mechanical properties and excellent resistance to corrosion and oxidation. Its numerous applications include high-temperature hardware, turbine blades, parts for jet engines and aerospace components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-79. Producer or source: High-strength, high-temperature alloy mills & foundries.

AMPCO D-4 is a copper-aluminum-iron-nickel alloy characterized by high hardness and strength, high toughness, good resistance to fatigue and wear, and excellent resistance to corrosion. Its as-cast mechanical properties can be improved by heat treating; in the heat-treated condition it is designated Ampco D-4HT. It is suited for service up to 750 F. Typical applications include aerospace components, marine hardware, valve seats, glands and stuffing box nuts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-444. Producer or source: Ampco Metal Inc..

BRUSH Alloy 3 offers the highest electrical and thermal conductivity of any beryllium-copper alloy. It possesses an excellent combination of moderate strength, good corrosion resistance and good resistance to moderately elevated temperatures. Because of its unique physical and mechanical properties, Brush Alloy 3 finds widespread use in welding applications (RWMA Class 3), current-carrying springs, switch and instrument parts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-454. Producer or source: Brush Wellman Inc..

JESSOP JS600 is a nickel-chromium-iron alloy for use in environments requiring resistance to heat and/or corrosion. It has excellent mechanical properties and a combination of high strength and good workability. It performs well in applications with temperatures from cryogenic to more than 2000 F. Its many applications include aircraft/aerospace components, equipment for chemical and food processing and parts for heat-treating equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-287. Producer or source: Jessop Steel Company.

UNILOY 13-8 has high strength, ductility and toughness in large cross sections in both longitudinal and transverse directions. The alloy has excellent mechanical property uniformity; this is the result of a well-balanced chemical composition. Because of its excellent general corrosion resistance (nearly equal to AISI Type 304 stainless steel) and its high degree of resistance to stress-corrosion cracking, it is used in a variety of environments. Typical uses are aircraft structural components, shafts, valve parts and fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-457. Producer or source: Cytemp Cyclops.