Search Results for materials handling systems

Dillidur 325L is a wear resistant steel with a surface hardness at room temperature of 325 HB for 10 mm plate thickness. The material is easy to bend, hot work and machine. Due to its increased wear resistance, it is used to produce excavators, conveyors, and materials handling systems as well as dump truck bodies. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-634. Producer or source: Dillinger Hütte GTS.

Haynes Stellite No. 4 is a cobalt-base cast alloy recommended for handling severe conditions of abrasion, heat and corrosion. It is especially recommended to resist the severe abrasive and corrosive action of manganese dioxide, carbon particles, and ammonium and zinc chlorides in the battery mix used in the manufacture of dry batteries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-59. Producer or source: Union Carbide Materials Systems Division.

DZR Yellow Brass is a new, corrosion-resistant brass. It has excellent resistance to dezincification which makes it highly suitable for water-system applications, marine hardware, ornaments and door handles. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-323. Producer or source: Federated Metals Corporation.

JESSOP JS Alloy G is a nickel-chromium-iron-molybdenum-copper alloy that exhibits excellent resistance to a wide variety of corrosive conditions. It resists corrosion in both oxidizing and reducing environments, and can handle both acid and alkaline solutions. JS Alloy G resists pitting and stress-corrosion cracking extremely well. Among its many uses are equipment for chemical processing and for pulp and paper manufacture. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-289. Producer or source: Jessop Steel Company.

Märker/Centralloy H101 is a Fe-Ni-Cr alloy matrix, designed to combine adequate strength with structural stability. Although originally designed to be a centrispun cast alloy, it is now available in static and investment cast product forms. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on machining and joining. Filing Code: Ni-569. Producer or source: Schmidt & Clemens Inc.

MoldMAX LH (Low Hard) is a copper beryllium mold alloy that provides hardness and strength comparable to standard AISI P-20 tool steel and a thermal conductivity five times higher. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion andwear resistance, and surface qualities as well as forming, machining, and joining. Filing Code: Cu-824. Producer or source: Materion Brush Performance Alloys.

INCOR 16 is a permanent-magnet material. It is an important tool for design engineers in many fields; in fact, it is a powerful extension to the design and product possibilities available with magnet technology. Incor 16 can be used to design motors that are smaller, lighter and more powerful. Microwave tubes can handle higher capacities. Magnetic drives and couplings can be made smaller and operated at higher torque levels. Electronic devices can be made more compact. Incor 16 can be used to lower size and weight in a wide range of other products where permanent magnets are used. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and machining. Filing Code: Co-77. Producer or source: Indiana General Magnet Products.

MoldMax HH is a part of a family of copper based alloys that are trade named MoldMax and PROtherm. These alloys are processed to provide an optimal combination of hardness and thermal conductivity and are specified in a variety of injection and blow mold tooling applications. The HH grade is the premier copper mold alloy supplied by the producer. This alloy has hardness and strength comparable with standard tool steels but its thermal conductivity is at four to six times higher. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion andwear resistance, and surface qualities as well as forming, machining, and joining. Filing Code: Cu-823. Producer or source: Materion Brush Performance Alloys.

DURICHLOR is a high silicon iron for corrosive services, especially in the handling of hydrochloric acid in all concentrations. It is also very resistant to moist chlorine gas and many destructive chloride-containing solutions. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: Fe-7. Producer or source: The Duriron Company Inc..

Boehler Uddeholm alloy BeCu172 is a high-strength beryllium copper mold with high thermal conductivity. BeCu Alloy 172 can be supplied in the high-hard (HH) condition at approximately 40 HRC and in the low-hard (LH) condition at approximately 30 HRC. This alloy is used for applications such as pinch-offs and neck rings for blow molds, cores, and inserts in injection molds and injection nozzles and manifolds for hot runner systems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-781. Producer or source: Böhler-Uddeholm Corporation.

Colmonoy No. 63HV is a nickel-base alloy recommended for hard surfacing parts to resist wear, corrosion, heat, and galling. The hardness of Colmonoy 63HV ranges to 58–61 HRC, and it is resistant to abrasion. Colmonoy 63HV is sized exclusively for high-velocity oxygen-fuel thermal spray systems. This datasheet provides information on composition. It also includes information on heat treating, surface treatment, and powder metal forms. Filing Code: Ni-665. Producer or source: Wall Colmonoy Corporation.

URANUS 52N is a nitrogen-alloyed duplex stainless steel improved in stress-corrosion cracking resistance and with pitting and crevice corrosion resistance better than AISI Type 317L. Applications include handling phosphoric acid contaminated with chlorides and in flue gas desulfurization scrubbers. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-566. Producer or source: Creusot-Marrel.

DURICHLOR 51 SUPERCHLOR is a vacuum treated high silicon iron for corrosive services, especially in the handling of hydrochloric acid in all concentrations. It is also very resistant to most chlorine gas and many destructive chloride-containing solutions. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as machining and joining. Filing Code: FE-98. Producer or source: The Duriron Company Inc.

KORLOY 2570 and 2573 are zinc-base alloys possessing superior strength and good low-temperature impact properties down to -60 F. They are easily forged, extruded and machined for wrought applications and alloy 2570 can be used in the cast condition. They have excellent bearing properties and can be joined with adhesives, torch welding techniques, and solders compatible with aluminum alloy surfaces. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-16. Producer or source: Cominco Ltd.

Durichlor 51M is a high silicon iron for corrosive services, especially in the handling of hydrochloric acid in all concentrations. It is also very resistant to most chlorine gas and many destructive chloride-containing solutions. The alloy is treated at melting by argon ladle degassing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as machining and joining. Filing Code: FE-109. Producer or source: The Duriron Company Inc.

TAXTIX 123 and TACTIX 138 resins cured with TACTIX H31 and TAXTIX H41 hardeners are specifically designed to maximum performance properties most critical to advanced composites. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength. Filing Code: P-15. Producer or source: The Dow Chemical Company, Dow Plastics.

BRUSH WELLMAN Alloy 360 beryllium nickel strip combines unique mechanical and physical properties required in electrical, electronic and electromechanical systems. Strength, stress-relaxation and fatigue are some of those properties. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and surface treatment. Filing Code: Ni-413. Producer or source: Brush Wellman Inc..

J and L Type 409NI is a ferritic stainless steel with 11% Cr. It exhibits an excellent combination of good formability, economy, and resistance to oxidation and corrosion. It is typically used in automotive exhaust systems or where more forming is required. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-902. Producer or source: J & L Specialty Steel Inc.

Ferrinox 255 is categorized as a super duplex (austenitic/ferritic) stainless steel. This high-performance alloy combines high mechanical strengths (typically up to 600 MPa yield strength) and good ductility with outstanding corrosion resistance to marine environments and a wide, diverse range of industrial media. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, machining, and joining. Filing Code: SS-1041. Producer or source: Advanced Metals International.

TACTIX 740 resin offers high durability for hot melt adhesives. TACTIX 741, an acetone solution of TACTIX 740, is designed for composites prepared by solution prepregging. This datasheet provides information on composition and physical properties. Filing Code: P-32. Producer or source: The Dow Chemical Company, Dow Plastics.