Copper Alloy No. 875 is a copper-base casting alloy for applications requiring a combination of high strength and good resistance to corrosion. It cannot be hardened or strengthened by heat treatment. Its many applications include valve parts, small propellers, gears and marine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-320. Producer or source: Copper alloy foundries.

RA 400 is a ductile nickel-copper alloy that is characterized by resistance to a wide range of corrosive environments, freedom from stress-corrosion cracking, and good strength and toughness over a wide temperature range. This alloy is often chosen to handle sulfuric acid under reducing conditions. Its uses include marine components, caustic evaporators and chemical processing equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-284. Producer or source: Rolled Alloys Inc..

ALUMINUM 535.0 is a high-purity aluminum alloy of the aluminum-magnesium type. It possesses a high and stable combination of strength, shock resistance and ductility in the cast condition. Among its many applications are armament, hardware, cooking utensils, highway trailers, textile machinery and marine components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Al-254. Producer or source: Various aluminum companies.

Copper Alloy No. C86700 is a free-machining, high-tensile (typically 85,000 psi) cast manganese bronze; it is also known as high-strength yellow brass. It has an excellent combination of strength and ductility and good resistance to corrosion in numerous environments, including seawater. Typical uses are valve stems, moderate-duty gears and marine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-499. Producer or source: Copper alloy foundries.

ALUMINUM B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-214. Producer or source: Various aluminum companies.

Arcam Ti6Al4V ELI (Grade 23) is a titanium-based alloy that is used for the production of additively manufactured components using electron beam melting (EBM). This alloy offers the best all-round performance for a variety of weight reduction applications in aerospace, automotive, and marine equipment. It also has numerous applications in the medical industry. Arcam Ti6Al4V ELI is very similar to Arcam Ti6Al4V, except that Arcam Ti6Al4V ELI contains reduced levels of oxygen, nitrogen, carbon, and iron. These lower interstitials provide improved ductility and better fracture toughness. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on machining and joining. Filing Code: Ti-178. Producer or source: Arcam AB (a GE Additive Company).

Carpenter Stainless Type 304HN is the high-nitrogen version of Type 304 and 304H stainless steels. Interstitial strengthening with both carbon and nitrogen provides this alloy with significantly higher yield and tensile strength as annealed. Typical applications include aerospace and power components, as well as marine shafting. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-763. Producer or source: Carpenter. See also Alloy Digest SS-368, October 1979.

ATLANTIC 8A Alloy is a cast manganese bronze offering an excellent combination of mechanical properties and resistance to corrosion in fresh and sea water. It is used for applications such as gears, marine hardware and waveguide components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-303. Producer or source: Atlantic Casting and Engineering Corporation.

Revere No. 508 is a highly ductile, malleable and corrosion resistant copper-nickel alloy suitable for condenser and heat exchanger tubes and many engineering applications such as salt water piping aboard ship, many components of salt water and fresh water stills, feed water heater tubes and marine coolers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-81. Producer or source: Revere Copper and Brass Inc..

HPM MP35N-LTi is a nonmagnetic nickel-cobalt-chromium-molybdenum alloy that has excellent corrosion resistance, can obtain ultrahigh tensile strengths 2068 MPa (300 ksi) through work hardening and aging, and has good toughness and ductility. Applications include electrical components, springs, and instrument parts in medical, chemical, food processing and marine environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: CO-120. Producer or source: Hamilton Precision Metals.

CARPENTER STAINLESS TYPE 304HN is essentially a high-nitrogen version of AISI Type 304 stainless steel. By means of solid-solution strengthening, the nitrogen provides significantly higher yield strength and tensile strength as annealed than conventional Type 304, without adversely affecting ductility, corrosion resistance or nonmagnetic properties. Its applications include aircraft and aerospace components and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-368. Producer or source: Carpenter. See also Alloy Digest SS-763, September 1999.

AMBRALOY 614 is an aluminum bronze with high strength and excellent resistance to corrosion in a wide range of environments. Also, it is rated as one of the most ductile of the strong and durable aluminum bronzes. Compared with tin bronzes which have been used since ancient times, aluminum bronzes have gradually become popular only since aliminum became commercially available about 85 years ago. Among its many uses are marine hardware, structural components and corrosion-resistant tanks and vessels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-437. Producer or source: Anaconda American Brass Company.

AMPCO D-4 is a copper-aluminum-iron-nickel alloy characterized by high hardness and strength, high toughness, good resistance to fatigue and wear, and excellent resistance to corrosion. Its as-cast mechanical properties can be improved by heat treating; in the heat-treated condition it is designated Ampco D-4HT. It is suited for service up to 750 F. Typical applications include aerospace components, marine hardware, valve seats, glands and stuffing box nuts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-444. Producer or source: Ampco Metal Inc..

AMPCO M-4 is a copper-aluminum-nickel-iron-manganese alloy that possesses high hardness, high strength, good resistance to fatigue and wear, and excellent resistance to corrosion. It is used in both cast and wrought forms. Typical applications include marine hardware, aerospace components, wear plates, gears, bushing and pickling equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-469. Producer or source: Ampco Metal Inc..

ALUMINUM 712.0 is a high-strength aluminum casting alloy that is self aging at room temperature. It has good machinability, good dimensional stability and good resistance to corrosion and shock. Among its applications are marine castings, high-strength pressure-tight castings, aircraft components and cylinder heads. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-249. Producer or source: Various aluminum companies.

AA B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-270. Producer or source: Various aluminum companies.

COPPER ALLOY No. C36000 is a free cutting brass that is widely used in components and systems-products controlling motion, flow and pressure. High productivity, extended cutting tool life and good corrosion resistance are among its assets. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-548. Producer or source: Brass mills.

SSC Invar 36 was developed for use in applications where dimensional stability is essential. It is a nickel-iron alloy with a very low coefficient of thermal expansion from cryogenic temperatures to 200 deg C (390 deg F). It is utilized in aerospace composite tooling and die applications, as well as laser components, and cryogenic components and piping: liquefied natural gas production, storage, and transportation. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Fe-158. Producer or source: Sandmeyer Steel Company. Originally published December 2011, revised February 2012.

Nickelvac 925 is an alloy similar to alloy 825 (N08825), but with the age-hardening constituents of titanium and aluminum to achieve high strength while maintaining excellent corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-601. Producer or source: Allvac Metals Company.

Carlson Alloy C400 is a general purpose nickel-copper alloy having an excellent combination of high strength, ductility, weldability and corrosion resistance. It is widely used for handling sulfuric acid under reducing conditions, but also has good resistance to hydrofluoric acid, alkaline and neutral salts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-463. Producer or source: G.O. Carlson Inc.