Skip Nav Destination
Search Results for manufacturing applications
1-20 of 3885 Search Results for
Alloy Digest (2004) 53 (4): CS-142.
Published: 01 April 2004
... Algoma 100 is a cost-effective choice for applications that require high strength, improved notch toughness, weldability, and good formability. It is one in a full range of heat treated plate products for construction, mining, manufacturing, and military applications. This datasheet provides...
Alloy Digest (2004) 53 (2): CS-140.
Published: 01 February 2004
... AlgoTuf 440F is designed for wear resistance and is one in a full range of heat-treated plate products by Algoma Steel for construction, mining, manufacturing, and military applications. This datasheet provides information on composition, hardness, and tensile properties as well as fracture...
Alloy Digest (2013) 62 (12): CS-176.
Published: 01 December 2013
... AlgoTuf 400F is designed for superior wear resistance and is one in a full range of heat-treated plate products for construction, mining, manufacturing, and military applications. This alloy is more formable with less preheat than the other abrasion-resistant heat-treated steel plates...
Alloy Digest (1984) 33 (10): Ni-304.
Published: 01 October 1984
... is readily availabIe as cold-worked and heat-treated seamless tubing or pipe in a size range of 0.500-inch to 8.500-inch 0-D. (Outside Diameter). Extruded shapes can be obtained by making arrangements with the manufacturer. Applications: Nicloy 400 can be used for pump parts, marine fixtures, chemical...
Alloy Digest (1977) 26 (11): CS-69.
Published: 01 November 1977
... be considered. Impact notch toughness decreases as carbon and/or nitrogen contents increase above levels specified for SAE 1008 or 1010 steels. For higher strength applications. where notch toughness is of special importance, the manufacturer will be glad to rec- commend grades for their generally lower ductile...
Alloy Digest (1988) 37 (9): Al-290.
Published: 01 September 1988
.... Hollowcastbarsfrom2in. ODx13/4in. JDto16in. ODxll 3/4 in. ID. Centrifugally cast hollow bars in the range 17-20 in. OD x 11-16 in. ID. For fuJl details of available sixes or special sixes, consult the manufacturer. Applications: Crank and piston rod bearing; Diesel engine main, thrust con- necting rod and oscillator...
Alloy Digest (2006) 55 (5): Ni-637.
Published: 01 May 2006
... International® 2006 2006 ASM International aircraft manufacturing applications chemical composition creep properties elasticity HAYNES 282 heat treatability high-temperature alloys physical properties tensile properties workability wrought nickel alloys thermal properties Chemical...
Alloy Digest (1980) 29 (5): SA-372.
Published: 01 May 1980
... diameter of 1% inches. For larger sizes, consult the manufacturer. Applications: Flange material for support I-beams on truck trailers; lift trucks; automotive suspension systems; and auto- motive steering systems. It is anticipated that this steel will find many more uses in automotive and machin- ery...
Alloy Digest (1986) 35 (9): Al-271.
Published: 01 September 1986
.... Applications: ALCOA 7021 ALLOY is offered for the automotive bumper and bumper reinforcement market. Manufacturer: Aluminum Company of America Pittsburgh. Pennsylvania 152 19. ...
Alloy Digest (1984) 33 (11): Bi-38.
Published: 01 November 1984
... therapy. (5) Low-temperature solder for delicate assemblies and (6) Lens blocking by optics manufacturers. General Characteristics: Bismuth-25.6Pb-I 2.8Sn-9.6Cd-4In is a bismuth-base, low-melting controlled-shrinkage non-eutectic alloy that is used in a wide range of applications. It melts in the range...
Alloy Digest (1986) 35 (11): TS-466.
Published: 01 November 1986
... COLUMBIA SPECIAL is the manufacturer's highest quality best grade of water-hardening tool steel. It contains small amounts of chromium and vanadium. Its manufacture is controlled closely to insure uniform predictable hardenability. When brine quenched it develops a uniform high-hardness case...
Alloy Digest (2022) 71 (8): SS-1350.
Published: 01 August 2022
... stainless steel. Atlas 302HQ is the standard for the manufacture of self-tapping screws and light machine screws. It is also used for some bolts, set screws, rivets, and specialized fasteners. It has now totally replaced type 384 and type 305 austenitic stainless steels for cold heading applications...
Alloy Digest (1985) 34 (11): Ni-324.
Published: 01 November 1985
.... are available from the manufacturer. Applications: Chemical and petrochemical process industry; pulp and paper (digesters. bleach plant equipment); incinerator and flue gas scrubbers. reheaters, fans; components in sour gas service; heat exchangers in sulfuric acid production and others. Manufacturer...
Alloy Digest (2016) 65 (3): SS-1241.
Published: 01 March 2016
... thicknesses over 40 mm (1.6 in.) require special consultation. For a sheet thickness of 3 mm (0.12 in.) or greater, sheets up to 6 m (20 ft) long and up to 1600 kg (3527 lb) finished weight can be manufactured. Applications: Automotive exhaust system components, heat exchangers, heating furnace components...
Alloy Digest (1983) 32 (3): Bi-30.
Published: 01 March 1983
... Available: Rods. ingots. pigs. cast shapes. cakes.sticks. bars. buttons andshot. The forms vary with the manufacturer. Applications: Bismuth-28.5Pb-14.5Sn-9Sb alloy is used to anchor non-moving parts tn machinery. hold-down bolts in concrete floors and locator parts in tooling docks. It also is used IO...
Alloy Digest (1987) 36 (6): SS-486.
Published: 01 June 1987
...: ARMC0439 HIGH PERFORMANCE-IOisavailableincoilsand cut lengths in thickness from 0.030 to 0.250 inch in widths up IO 48 inches. For thicknesses in the range 0.018-0.029 inch. inquiry should be directed to the manufacturer. Applications: Automotive exhaust system components. Manufacturer: Armco Inc...
Alloy Digest (1997) 46 (9): Ni-529.
Published: 01 September 1997
... and in ribbons. strips, and ready-made elements. For more infor- mation, contact the manufacturer. Applications: Nihothal alloys are used in electric furnace heating elements at temperatures to 1400°C. Producer: Kanthal Corporarion Bethel, CT 06801-0281 (203) 744-1440 (203) 744-2703 (fax) DOI: 10.31399...
Alloy Digest (2005) 54 (9): SS-939.
Published: 01 September 2005
.... It has been pro- duced with typical gages used in exhaust applications ranging from 0.020 0.065 in. and in widths up to 48 in. wide. Contact the producer for sizes outside this range. Tube or pipe products using 409ALMZ product are available from tube/pipe manufacturers. Applications: Hot exhaust systems...
Alloy Digest (1981) 30 (4): SS-385.
Published: 01 April 1981
... CRUCIBLE 303 CC is an austenitic stainless steel with an outstanding combination of good machinability and resistance to taste and odor problems in beverage applications. Its chemistry was designed especially for use in the manufacture of fittings for soft-drink beverage dispensers. Typical...
Alloy Digest (1982) 31 (11): TS-407.
Published: 01 November 1982
... of Presto is shown in Table 1. Forms Available: Billets, bars, rods, wire and forgings. Applications: Presto is the standard for normal room-temperature bearing applications. Consumable-vacuum-melted quality is used where the exacting demands for clean steel are paramount. Manufacturer: Carpenter Technology...