Magnifer 8105 and 8105 So are soft magnetic alloys with a high nickel content. Typical applications for 8105 are recording heads, while 8105 So has additional applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-575. Producer or source: Krupp VDM GmbH.

Phytherm 55 is a 30 nickel balance iron alloy, and Phytherm 120 is a 30Ni-3Cu-2Cr-balance iron alloy. Both are soft magnetic alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming. Filing Code: Fe-165. Producer or source: Aperam Alloys Imphy.

Phytherm 230 is a 50 nickel, 10 chromium balance iron alloy, and Phytherm 260 is a 50 nickel, 9 chromium balance iron alloy. Both are soft magnetic alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming. Filing Code: Fe-166. Producer or source: Aperam Alloys Imphy.

Allegheny Ludlum No. 2 and No. 5 relay steels are iron/silicon alloys. They are soft magnetic alloys that combine high magnetic permeability, low residual magnetization and low coercive force with good mechanical properties and fabricability. This datasheet provides information on composition and physical properties. It also includes information on forming, heat treating, and machining. Filing Code: Fe-97. Producer or source: Allegheny Ludlum Corporation.

LODEX ALLOYS 30 to 43 are a series of permanent magnet alloys which can be held to close magnetic and physical tolerances. This datasheet provides information on composition and physical properties. Filing Code: Co-66. Producer or source: General Electric Company, Magnetic Materials Section.

G-E ALLOY P-6 is a carbon-free permanent magnet material which, when properly heat-treated, exhibits a high residual induction, high permeability, and high hysteresis loss characteristics. This datasheet provides information on composition and physical properties. It also includes information on heat treating. Filing Code: Co-18. Producer or source: General Electric Company, Magnetic Materials Section.

Metglas alloy 2705M is an amorphous cobalt-base alloy designed for shielding and high frequency cores. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: Co-122. Producer or source: Metglas Inc..

Metglas alloy 2714A is a cobalt based alloy with ultrahigh permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: Co-123. Producer or source: Metglas Inc..

Metglas Alloy 2605S3A is an iron-base alloy with high permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: Fe-157. Producer or source: Metglas Inc..

ALLOY 48 is a soft magnetic alloy designed for high permeability, high field strength and low core losses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: Fe-96. Producer or source: Spang Specialty Metals. See also Alloy Digest Fe-52, June 1975.

ALLOY 48 is a vacuum-melted, 48% nickel-iron alloy designed for high permeability, and low core losses. It is ideal in applications requiring efficient magnetic core materials, such as audio and instrument transformers, instrument relays, and many other communication equipment devices. It is excellent for rotor and stator laminations, and is also a very effective magnetic shielding material. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-52. Producer or source: Magnetics Specialty Metals Division. See also Alloy Digest Fe-96, April 1992.

METGLAS Alloy 2605SC is an amorphous iron-base, general-purpose, soft magnetic alloy with properties superior to conventional crystalline electrical steels. It offers a unique combination of high resistivity, high saturation induction and extremely low core loss; these characteristics make it suitable for use from low frequencies to very high frequencies. Its applications include transformers and other devices requiring a square-loop high-saturation material. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-64. Producer or source: Allied Corporation, Metglass Products Department.

METGLAS Alloy 2605S-2 is an amorphous iron-base soft magnetic alloy designed for extremely low core loss at distribution and power transformer frequencies and inductions. It offers improved performance over METGLAS Alloy 2605SC (Alloy Digest Fe-64, February 1982) at the higher operating temperatures (100 C) of these devices. Alloy 2605S-2 has a lower temperature coefficient of saturation than Alloy 2605SC. Applications include power transformers and other devices operating at low frequencies. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-65. Producer or source: Allied Corporation, Metglass Products Department.

METGLAS Alloy 2605S-3 is an amorphous iron-base soft magnetic alloy that can be annealed to obtain a round B-H loop which results in very low core loss at high frequencies (>1kHz). Because of its high saturation induction relative to ferrites or permalloys, significant size reductions are possible in high-frequency devices by utilizing this alloy. Unlike ferrites, it is suitable for use over a wide operating temperature range without cracking or showing large drops in usable flux density. Its uses include numerous high-frequency devices. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-68. Producer or source: Allied Corporation, Metglass Products Department.

METGLAS Alloy 2605CO is an amorphous iron-base soft magnetic alloy. It has the highest saturation induction of any amorphous alloy commercially available, combined with very low core loss. It is the alloy of choice when low weight is as important as efficiency. It is particularly suited to 400 Hz aerospace applications where small core size is a requirement, and to pulse applications where maximum flux swing is desired. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-69. Producer or source: Allied Corporation, Metglass Products Department.

Vicalloy II is a precipitation hardening cobalt-base alloy recommended for electromechanical devices. It is a permanent magnet alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-58. Producer or source: Crucible Steel Division, Colt Industries.

Cunife-II is a permanent magnet alloy recommended where magnets must be formed or machined, as this material is ductile, malleable, and machinable after heat treatment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-209. Producer or source: Hoskins Manufacturing Company.

Hiperco 35 is an iron-cobalt type of soft magnetic material recommended for use in motors, generators, transformers and relays at temperature above 950 F. It yields the highest known saturation value of 24,500 gausses. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Fe-41. Producer or source: Westinghouse Electric Corporation.

COLUMAX-5 is a heat treatable permanent magnet alloy, anisotropic and highly stable. It has a very high magnetic energy product. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: Fe-42. Producer or source: Thomas & Skinner Inc..

Carpenter Hy-Ra 80 is a nickel-iron-molybdenum alloy specially processed to exhibit square hystereris loop properties. It is recommended for tape wound toroids which will show specific magnetic characteristics after hydrogen annealing. This datasheet provides information on composition and physical properties. It also includes information on heat treating. Filing Code: Ni-158. Producer or source: Carpenter.