Search Results for machine components

Alloy Steel 5Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite or ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears, ship forgings, and many other thick-section components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-403. Producer or source: Alloy steel mills and foundries.

COPPER ALLOY No. C36000 is a free cutting brass that is widely used in components and systems-products controlling motion, flow and pressure. High productivity, extended cutting tool life and good corrosion resistance are among its assets. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-548. Producer or source: Brass mills.

AISI 8650 is a triple-alloy steel of the oil-hardening type. Its good hardenability and strength make it suitable for many machine and tool components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-437. Producer or source: Alloy steel mills and foundries.

TOOLOX 33 is a member of the Toolox family of quenched-and-tempered prehardened tool and machine steel, delivered with guaranteed properties. Toolox 33 has a through hardness of HBW 300. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-670. Producer or source: International Mold Steel Inc.

TOOLOX 44 is a member of the Toolox family of quenched and tempered prehardened tool and machine steel, delivered with guaranteed properties. Toolox 44 has a hardness if HRC 45 and is ideal for nitriding. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-671. Producer or source: International Mold Steel Inc.

Alloy Steel 3.5Ni-1.8Cr-0.4Mo-0.1V is highly suitable for massive components, usually more than four inches thick. It has high hardenability which in a water-spray or water-immersion quench contributes to the formation of sizeable amounts of martensite along with some bainite, and possibly a little ferrite. On tempering, the martensite adds to toughness and lowers the temperature of transition from tough to brittle failure. This steel is suitable for intermediate-duty and heavy-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-404. Producer or source: Alloy steel mills and foundries.

F.V.520B is an improved martensitic stainless steel which has good corrosion resistance, weldability, and capacity of being hardened by low temperature heat treatment. It is recommended for steam turbine blades and aircraft components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-166. Producer or source: Firth-Vickers Stainless Steels Ltd.

UNILOY 326 is a two-phase, ferromagnetic stainless steel characterized by high strength and very good general and stress corrosion resistance. It has distinct advantage for the fastener industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-241. Producer or source: Cyclops.

St. Joseph DS-LEAD (DSL) is a wrought product consisting of 99.9% pure lead matrix strengthened by an extremely fine dispersion of lead oxide particles. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Pb-6. Producer or source: St. Joseph Lead Company.

FERRO-TIC C is a machinable grade of cemented carbide which can be hardened by oil quenching. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as creep. It also includes information on forming, heat treating, and joining. Filing Code: TS-82. Producer or source: Sintercast Corporation of America.

Arcelor Mittal HP magnet plate was developed for use as large fabricated DC magnets. This datasheet provides information on composition, tensile properties, and shear strength. It also includes information on heat treating, machining, and joining. Filing Code: SA-847. Producer or source: ArcelorMittal USA.

FERRO-TIC CM is a machinable grade of cemented carbide which can be hardened by oil quenching after machining to shape. It is hardened to Rockwell C66-70 and exhibits excellent abrasion resistance. It is recommended for heavy cold heading or forming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-228. Producer or source: Chromalloy American Corporation, Sintercast Division.

MUELLER Alloy 6731 is a free-cutting heat-treatable bearing bronze for use where no cold working of the metal is required. It is supplied only as forgings for use against hard mating members. It has excellent mechanical and wear properties for bearings and gears. It can be soldered readily. Its applications include pump barrels, bearings, gears and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-478. Producer or source: Mueller Brass Company.

AISI 1144 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.24-0.33% sulfur to provide a free-machining steel. It is recommended especially for high-production automatic machine products. It has relatively low hardenability. Its ductility and toughness are reasonably good in the longitudinal direction, but they tend to be low in the transverse direction. The many uses of AISI 1144 include mine-car axles and shafts, screws, propeller shafts, ball joints, bushings, bolts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-98. Producer or source: Carbon steel mills.

Ovako 100Cr6 comprises a group of through-hardening bearing steels with modification to improve machining, cold forming, and cleanliness for better fatigue strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, forming, and heat treating. Filing Code: SA-582. Producer or source: Ovako North America Inc.

Aluminum 7xxx series alloys contain zinc as the main alloying element, usually in combination with magnesium and copper. High-strength 7020 alloy is widely used in aerospace structures and is approved by the world’s leading airframe builders. For engineering applications this alloy is generally used in the T651 temper in order to provide maximum strength. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-400. Producer or source: Alcoa Mill Products Inc.

Sandvik 5RA50 is an austenitic chromium nickel stainless steel to which an element has been increased to improve machinability. The alloy is suitable for automatic screw machines. See also Sandvik Sanmac 304L (Alloy Digest SS-585, March 1995). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as joining. Filing Code: SS-678. Producer or source: Sandvik.

Aluminum 8280 is a aluminum bearing alloy recommended for maximum operating temperature of 300 F. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on machining. Filing Code: Al-165. Producer or source: Aluminum Company of America.

SAE 1078 is high-carbon steel of low hardenability. It can be hardened by quenching from the austenitizing temperature into oil or water; care must be exercised to prevent cracking when quenching into water. This steel develops high surface hardness and a soft core on quenching and tempering lightly. It has good wear resistance. Its many uses include agricultural equipment, tools, springs and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-83. Producer or source: Carbon steel mills.

VASCO 734 is a precipitation hardening stainless maraging steel. Its corrosion resistance in marine atmosphere is comparable to that of AISI Type 430 ferritic stainless steel. Its low predictable shrinkage reduces post-age machining and eliminates rejected parts due to warpage in heat treatment. The steel is produced by high quality vacuum melting. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-516. Producer or source: Teledyne Vasco.