Search Results for joinability

Meehanite SFF350 is a ferritic ductile iron with a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 24%, when measured on test pieces machined from separately cast samples. It is specifically designed to provide good impact properties at low temperature. This fully ferritic Meehanite grade is produced from specially selected high purity raw materials and by subjecting the castings to an extended annealing heat treatment in order to fully develop the mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and joinability. Filing Code: CI-90. Producer or source: Meehanite Metal Corporation.

Cleveland-Cliffs 430 Ultra Form is a ferritic stainless steel that was developed as a more formable version of type 430 stainless steel. It contains a small addition of titanium and has a more equiaxed microstructure. It is particularly suited for parts having complex shapes. Cleveland-Cliffs 430 Ultra Form combines good corrosion resistance with heat and oxidation resistance up to 815 °C (1500 °F), while having improved mechanical properties over type 430 stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joinability. Filing Code: SS-1344. Producer or source: Cleveland-Cliffs Inc.

1045, 1045H, 1046, C45, C45E, and C45R are wrought medium-carbon non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. 1045, 1045H, 1046, C45E, and C45R may also be flame or induction hardened. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. Owing to their low hardenability their use in the quench hardened and tempered condition is not recommended for large sizes as the improvement in mechanical properties over the normalized condition is insufficient to justify the additional cost of heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joinability. Filing Code: CS-217. Producer or source: Data Survey.

Austral Wright 3003 (UNS A93003) is a wrought, non-heat-treatable, aluminum-manganese-copper alloy (3xxx series). It is used in a wide variety of applications where moderate strength, good formability, and good resistance to corrosion are important. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joinability. Filing Code: Al-485. Producer or source: Austral Wright Metals.

1039, 1040, C40, C40E, and C40R are wrought medium-carbon non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. 1039, 1040, C40E, and C40R may also be flame or induction hardened. These steels are widely used for moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. Owing to their low hardenability their use in the quench and tempered condition is not recommended for large sizes, as the improvement in mechanical properties over the normalized condition is insufficient to justify the additional cost of heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joinability. Filing Code: CS-216. Producer or source: Data Survey.

Copper No. 142 is an arsenical copper deoxidized with phosphorus. Its capacity is excellent for hot forming or cold working and it has excellent joinability characteristics for soldering, brazing and gas-shielded arc welding. Its leading use is tubing for condensers and heat exchangers. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-284. Producer or source: Copper and copper alloy mills.

Copper Alloy No. C41300 is brass with an addition of 1% tin. It has moderate strength and good ductility. It has a good combination of formability, joinability and resistance to corrosion. Typical uses comprise jewelry products, components for electrical switchgear, bushings and hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-430. Producer or source: Copper and copper alloy mills.

CDA ALLOY 725 (Now known as CDA ALLOY C72500) is a copper-nickel-tin alloy designed to improve the reliability of electrical connectors by resisting oxidation and thus providing improved solderability. It has a pleasant silver color and excellent joinability by soldering, brazing and spot and butt resistance welding. Its uses include electrical connectors, relay and switch springs, and builders' hardware. The revision is being made to correct an error in composition and for general updating. The original name (CDA ALLOY 725) is being retained because of the correction in composition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-229. Producer or source: Copper and copper alloy mills. Originally published March 1971, revised July 1985.

Copper No. C14300 is a cadmium copper deoxidized with small amounts of lithium or other suitable elements as agreed upon. It has an excellent capacity for hot forming or cold working. Its joinability characteristics are excellent for soldering, brazing and gas-shielded arc welding. Among its applications are cooling fins for automotive and heavy-duty radiators, anneal-resistant electrical uses and air conditioners. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-511. Producer or source: Copper and copper alloy mills.

Cleveland-Cliffs 18 SR is a ferritic stainless steel that is especially valuable for applications requiring high-temperature scaling resistance. Its properties, under cyclic conditions, are superior to those of types 409, 430, 304, 309, and 310 stainless steels. In addition, it is more economical than many of the stainless steels that are intended for high temperature applications. Unlike many of the straight chromium alloys, Cleveland-Cliffs 18 SR is readily welded by conventional methods. It is not subject to troublesome embrittlement or loss of corrosion resistance in the heat-affected zone. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low temperature performance, high temperature performance, and corrosion resistance as well as forming and joining. Filing Code: SS-1367. Producer or source: Cleveland-Cliffs Inc.

Austral Wright C26000 (70-30 Brass) is a copper-zinc alloy. It has the distinctive clear bright yellow color normally associated with brass. Austral Wright C26000 possesses an excellent combination of strength and ductility. This grade is the most widely available copper alloy in the sheet form. It is often used where its deep drawing qualities are needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-944. Producer or source: Austral Wright Metals.

Atlas 316 is a chromium-nickel-molybdenum austenitic stainless steel, second only to Atlas 304 in commercial importance. The molybdenum gives Atlas 316 better overall corrosion resistant properties than type 304 austenitic stainless steel, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed, welded, soldered, and cut by both thermal and mechanical methods. The austenitic structure gives excellent toughness, even down to cryogenic temperatures. Atlas 316L, the low carbon version of Atlas 316, is highly resistant to sensitization (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components; about 5 mm, 0.2 in., and over. Atlas 316H, with its higher carbon content, has some application at elevated temperatures, as does stabilized type 316Ti. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1365. Producer or source: Atlas Steels.

GECOR is a cobalt-rare earth metals permanent magnet alloy. It has the highest magnetic energy product of any commercial magnetic material. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on machining and joining. Filing Code: Co-65. Producer or source: General Electric Company, Magnetic Materials Section.

Mueller 605 is a low-leaded bearing alloy for use where ductility for cold working is necessary. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-131. Producer or source: Mueller Brass Company.

Copper Alloy No. C36500 is uninhibited leaded Muntz metal containing nominally 0.5% lead to provide fairly good machinability. It has moderate strength; the tensile strength of hot-rolled 1-inch thick plate is 54,000 psi (372 MPa). It has good resistance to corrosin in both fresh and salt water but is subject to dezincification. It is used for condensers and heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-524. Producer or source: Copper and copper alloy mills.

ANACONDA Alloy (E) 505 is a low-tin phosphor bronze with excellent resistance to corrosion, excellent ductility and good resistance to fatigue. It has good thermal and electrical conductivity. Its uses include flexible metal hose, electrical contacts, fuse clips and fasteners. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-385. Producer or source: Anaconda American Brass Company.

AMPCOLOY 97 is a high-conductivity alloy in which medium hardness and strength are provided by age hardening. Its applications include such items as current-carrying rings, water-cooled casting molds, bushings and bearings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: Cu-321. Producer or source: Ampco Metal Inc..

KANTHAL 70 alloy was designed to provide a high positive temperature coefficient to electrical resistance comparable with that of pure nickel; however, it has much higher electrical resistivity than pure nickel. This makes it useful as a voltage regulator when placed in series with another electrical device across a fluctuating voltage source. Kanthal 70 has a maximum recommended operating temperature of 600 C and is used widely in resistance thermometers and in various appliance and automotive applications. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-270. Producer or source: The Kanthal Corporation.

ALUMINUM 6053 is a wrought aluminum alloy that can be hardened and strengthened by aging. It is characterized by moderate strength, good formability and excellent resistance to corrosion. This alloy is used widely for rivets. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-131. Producer or source: Various aluminum companies. Originally published November 1963, revised June 1979.

WRM Alloy C15500 is a copper alloy with one of the best combinations of electrical, mechanical, and relaxation properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-616. Producer or source: Waterbury Rolling Mills Inc. Originally published May 1998, corrected October 1999.