Skip Nav Destination
Search Results for industrial turbine applications
1-20 of 114 Search Results for
industrial turbine applications
Alloy Digest (1998) 47 (2): Ni-537.
Published: 01 February 1998
... CMSX-11B is a non-rhenium containing single-crystal (SX) superalloy defined primarily for industrial turbine applications. The material develops a unique and extremely good blend of hot corrosion and oxidation resistance. It exhibits extremely good castability, employs relatively simple solution...
Alloy Digest (2014) 63 (10): Ni-719.
Published: 01 October 2014
... Alloy IN 939 was developed for turbine airfoils and has been used extensively in industrial gas turbines. However, the development of the alloy and the joining technology required for application to large structural components in aero engines includes risks. This datasheet covers a weldable...
Alloy Digest (1980) 29 (6): Ti-77.
Published: 01 June 1980
... shielding and can be heat treated to high strength levels by solution treating and aging. Its many applications include components for gas-turbine compressors, air-frame forgings, pressure vessels and special ordnance equipment. *CRUCIBLE is a registered trademark of Colt Industries. Composition: Physical...
Alloy Digest (1975) 24 (4): SS-309.
Published: 01 April 1975
.... electrical heating ele- ments, furnace parts. gas turbines and similar high-temperature applications. Manufacturer: Crucible Stainless Steel Division Colt Industries Midland, Pennsylvania 15059. ...
Alloy Digest (1967) 16 (11): Co-54.
Published: 01 November 1967
... MAR-M Alloy 509 is a vacuum melted, cobalt-base alloy having high strength, low creep rates, and resistance to oxidation and thermal shock. It is recommended for aircraft and industrial gas turbine applications. This datasheet provides information on composition, physical properties, hardness...
Alloy Digest (1990) 39 (7): Cer-4.
Published: 01 July 1990
... SILICON NITRIDE SN-220 has found its niche in industrial applications in engine and gas turbine components. It has excellent high-temperature strength and thermal shock resistance. This datasheet provides information on composition, physical properties, elasticity, and bend strength as well...
Alloy Digest (1996) 45 (12): Ni-519.
Published: 01 December 1996
... ANVAL 625 is a corrosion- and oxidation-resistant coating superalloy. Applications include the restoration of equipment for the pulp and paper, chemical process, and gas turbine industries. This datasheet provides information on composition, physical properties, and hardness. It also includes...
Alloy Digest (1992) 41 (10): Ni-415.
Published: 01 October 1992
... of CM 247 LC alloy has re- sulted in its selection for conventionally cast, large struc- tural turbine components for an advanced fighter engine. Industrial turbine applications for DS blade and vane components have developed in CM 247 LC alloy where natural gas is used as fuel. CM 247 LC alloy...
Alloy Digest (2007) 56 (5): Ni-650.
Published: 01 May 2007
.... It is a precipitation- hardenable alloy and is made by the vacuum induction melting process. Consumable arc remelting of vacuum induction melted electrodes is also performed. Product Forms Available: Long products and plate Applications: Components for aircraft industry and gas turbines such as shafts, blades...
Alloy Digest (1992) 41 (11): Ni-417.
Published: 01 November 1992
... with moderate to high thermal gradient industrial processes, wide solution heat treatment window , phase stability and excellent environmental properties. Single crystal turbine blade and vane airfoils are now replacing equiaxed and directionally solidified (DS) coun- terparts in turbine engines...
Alloy Digest (1957) 6 (12): Ni-38.
Published: 01 December 1957
... INCOLOY 901 is a nickel-base alloy having creep and rupture strength at 1000 to 1400 F. It is recommended for use in aircraft and industrial gas turbine components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also...
Alloy Digest (1981) 30 (12): SS-398.
Published: 01 December 1981
...) Gas-turbine and jet-engine parts. For a specific application, consult the manufacturer and make an independent study and evaluation for suitability. Manufacturer: Crucible Specialty Metals Division Colt Industries Syracuse, New York 13201. ...
Alloy Digest (1970) 19 (7): Ni-155.
Published: 01 July 1970
.... Forms Available: Bars, billets. forgings and sheets. Applications: Aircraft and industrial gas turbine components, turbine rotor and compressor discs, structural parts. Manufacturer: Special Metals Corporation New Hartford, N.Y. ...
Alloy Digest (1998) 47 (1): Ni-533.
Published: 01 January 1998
... with aluminide coatings and platinum-aluminide. Advanced MCrAlY overlay test results are encouraging. Applications: The CMSX-10 superalloy has been extensively characterized and is flight engine qualified (Rolls-Royce Trent 890) on the Boeing 777 aircraft. Land-based turbine usage also has occurred (Industrial...
Alloy Digest (1993) 42 (1): Ni-420.
Published: 01 January 1993
.... Applications: Turbine blade and vane airfoils to replace equiaxed and DS counterparts in turbine engines. A typical application is the first and second stage turbine blades in the Allison T406-AD-400 engine. Producer: Cannon-Muskegon Corporation Muskegon, MI 49443-0506 616755-1681 ...
Alloy Digest (1999) 48 (7): Ni-557.
Published: 01 July 1999
... in a number of fabri- cated part applications in the gas turbine and aerospace industries in Europe and is also employed in general industrial heating uses. ©Copyright 1999, ASM International. All rights reserved. Data shown are typical, not to be used for specification or final design. Published by: ASM...
Alloy Digest (1966) 15 (2): Ni-111.
Published: 01 February 1966
... be continued as low as 16OOoF minimum. Exposure at high temperatures to sulphurous atmospheres or to other sources of sulphur musr be avoided. Billers, bars, forgings, sheer and srrip Applications: Aircraft and industrial gas rurbincs components . turbine rotor and compressor discs, srructural members...
Alloy Digest (2020) 69 (4): Co-130.
Published: 01 April 2020
... sulfidation resis- tance, nonmagnetic. Product Forms Bar, coil, sheet Applications Afterburner liners, aircraft engine components, combustor cans, flame holders, gas turbines, transition ducts Supplier United Performance Metals 3475 Symmes Road Hamilton, Ohio 45015, USA Tel: +1 513 860 6500 Web: www.upmet.com...
Alloy Digest (2007) 56 (5): Ni-649.
Published: 01 May 2007
...: This alloy has been used primarily in the aerospace industry for items such as gas turbine rotor blades, gas turbine wheels, bolts, and other gas turbine structural parts. It has also found use in jet engine afterburners and airframe and missile structures. Non-aerospace applications include heat treat...
Alloy Digest (1957) 6 (5): SS-56.
Published: 01 May 1957
... developed as a turbine disc material so that advantage could be taken of its high proof strength, low thermal expansion, ease of machining and lower cost when compared with the austenitic materials or- iginally used for this application. It has recently been used for large rotor forgings for industrial gas...