TIMETAL 62S, because iron is used for the beta stabilizer in lieu of more expensive elements, has a lower formulation cost than most titanium alloys, yet the properties and processing characteristics of Ti-6A1-2Fe-0. 1Si are equivalent to or better than those of the workhorses of the titanium industry, including Ti-6A1-4V. The combination of reasonable cost and excellent mechanical properties make TIMETAL 62S a practical substitute for other engineering materials in numerous industrial applications that require low weight and high corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating. Filing Code: Ti-102. Producer or source: Timet.

Copper No. 110, generally known as electrolytic tough pitch copper or ETP, is cathode copper remelted and cast with a controlled oxygen content. It is the most important type of copper commercially available and is used by the electrical industry as wire for electrical conductors, bars for bus-bars and commutators and in forms such as sheet, strip, and plate for many architectural and industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-222. Producer or source: Copper and copper alloy mills.

Alkrothal 3 is a ferritic FeCrAl alloy that is recommended for use at temperatures up to 1000 deg C (1830 deg F). Typical applications are in rheostats and braking resistors. It is also used as electrical heating elements in industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming. Filing Code: SS-1030. Producer or source: Kanthal AB.

TIMETAL 3-2.5 (Ti-3%Al-2.5%V) alloy is cold formable and weldable. This alloy is used primarily for honeycomb foil and hydraulic tubing applications. Industrial applications, such as pressure vessels and piping, also utilize this alloy. The alloy is available with palladium stabilization to enhance corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on heat treating. Filing Code: TI-114. Producer or source: Titanium Metals Corporation (Timet).

Copper alloy C32000 is a leaded red brass applicable to automatic screw machine production of parts for hardware and industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-556. Producer or source: Copper and copper alloy mills.

AlgoTuf 500F is designed for applications that require extremely high abrasion resistance. It is one in a full range of heat treated plate products for mining and other industrial applications. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-141. Producer or source: Algoma Steel Inc.

COMPO H is an oil-impregnated sintered bronze, produced by powder metallurgy techniques, which is widely used in automotive, applicance, farm equipment, and aircraft industry applications. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength. and bearing strength It also includes information on corrosion resistance Filing Code: Cu-246. Producer or source: Bound Brook Bearing Corporation of America.

Kubota alloys HK40 and HK50 are austenitic Fe-Cr-Ni alloys that have been standard heat-resistant materials for more than four decades. With moderately high temperature strength, oxidation resistance, and carburization resistance the alloys are used in a wide variety of industrial applications. HK 50 has slightly higher carbon content. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on casting, heat treating, machining, and joining. Filing Code: SS-998. Producer or source: Kubota Metal Corporation, Fahramet Division.

ULTRA 76 TANTALUM alloys have been used in various process industry applications requiring resistance to aggressive, hazardous chemicals. These tantalum alloys provide cost-effective, long service-life for critical components in severe (corrosive) environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: TA-13. Producer or source: H.C. Starck Inc.

EASTERN STAINLESS Type 317LM is an austenitic chromium-nickel stainless steel containing low carbon (0.03% max.) and relatively high molybdenum (4.00 to 4.5%). It was developed primarily to provide more resistance to attack by sulfurous acid than is provided by competitive conventional stainless steels. Its good corrosion resistance has extended its use to many other industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-363. Producer or source: Eastern Stainless Steel Company.

SAE 1023 is a carbon steel of relatively low manganese content (0.30-0.60%); therefore, its hardenability, hardness and strength are somewhat lower than that of steels of higher manganese content at comparable carbon levels. It has good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot worked, normalized or water-quenched-and-tempered condition for many automotive and general industry applications. It may be used in the carburized condition or without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-78. Producer or source: Carbon steel mills.

EASTERN STAINLESS Type 317L is an austenitic chromium-nickel stainless containing low carbon (0.03% max.) and an addition of molybdenum (3.00-4.00%). This steel was developed primarily to resist more effectively the attack by sulfurous acid than is provided by some of the other competitive stainless steels. Its proven ability to resist corrosion had broadened its use considerably and now it is used for many other industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-453. Producer or source: Eastern Stainless Steel Company.

Sterling Silver (Silversmiths grade) contains a minimum of 92.50% silver; the standard grade contains a minimum of 92.10% silver. Historically the remainder was unrestricted but copper was (and is) used because it is more desirable, in general, than other metals. Also, copper is a more effective hardener than other metals that have been considered; however, copper lowers the melting point substantially and lowers the electrical and thermal conductivities appreciably. Sterling Silver is used for flat and hollow tableware, various items of jewelry and special industrial applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, and joining. Filing Code: Ag-11. Producer or source: Precious Metals Producers.

Avesta Sheffield Type 317L is an austenitic chromium-nickel stainless containing low carbon (0.03% max) and an addition of molybdenum (3.00-4.00%). This steel was developed primarily to more effectively resist the attack by strongly corrosive process environments, including those containing chlorides and other halides. Its proven ability to resist corrosion has broadened its use considerably, and it now has many industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-726. Producer or source: Avesta Sheffield AB.

SILICON NITRIDE SN-220 has found its niche in industrial applications in engine and gas turbine components. It has excellent high-temperature strength and thermal shock resistance. This datasheet provides information on composition, physical properties, elasticity, and bend strength as well as fracture toughness. Filing Code: Cer-4. Producer or source: Kyocera America Inc..

ALUMINUM 1100 is commercially pure aluminum and is characterized by its excellent ability to be drawn, spun, stamped or forged. It has good weldability, excellent resistance to corrosion and many home, architectural and industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-44. Producer or source: Various aluminum companies. Originally published October 1956, revised February 1974.

Copper Alloy No. 330 is a brass containing nominally 0.5% lead. It has good machinability, excellent cold-working properties, and a wide range of uses including general purposes, industrial applications, munitions and plumbing. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-294. Producer or source: Brass mills.

PLATINUM is a soft, ductile, white metal which can be readily worked either hot or cold. It has a wide range of industrial applications because of its excellent corrosion and oxidation resistance and its high melting point. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Pt-1. Producer or source: Matthey Bishop Inc..

LEAD-BASE SOLDER comprises a family of alloys, usually lead-tin alloys, with or without the addition of antimony, although there are other types including those containing silver. They are widely used in industrial applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: Pb-8. Producer or source: Most lead producers.

Ti-0.15Pd is an alpha-type titanium alloy recommended for the chemical industry applications where environments are moderately reducing, or fluctuate between oxidizing and reducing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-45. Producer or source: Reactive Metals Corporation.