ALUMINUM A201 offers high strength, high impact resistance, a good combination of room and elevated-temperature performance, and good ballistic properties. Its ballistic properties are comparable to those of the standard wrought aluminum alloys. Among its many application are components for military aircraft and missiles, and impellers for gas turbine engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Al-234. Producer or source: Consolidated Aluminum Corporation.

Copper Alloy No. 922 is a cast copper-tin-zinc-lead alloy formerly identified as Navy M or 88-6-1.5-4.5 alloy. It possesses a good combination of machinability, strength and resistance to corrosion. Alloy No. 922 is a good material to use in castings subject to liquid or gas pressures. Its many uses include valves, piston rings and pump impellers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-382. Producer or source: Copper alloy foundries.

Copper Alloy No. 878 is a copper-zinc-silicon alloy for die castings. Among the brass die-casting alloys, it has the highest strength, hardness and wear resistance; however, it is the most difficult to machine. It is used where very high requirements must be met for strength and wear resistance. Its many applications include tools, pump impellers, gears and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-386. Producer or source: Copper alloy producers.

Copper Alloy No. C93400 is cast bronze containing nominally 8% tin and 8% lead. Former commercial names (not recommended) are (1) High-Leaded Tin Bronze and (2) 84-8-8-0. It has excellent machinability, low strength and good resistance to corrosion. Its applications include bearings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-401. Producer or source: Copper alloy foundries.

Copper Alloy No. C93700 is a cast bronze with relatively low strength, good machinability and good corrosion resistance. Commercial names formerly used (not recommended) are (1) High-Leaded Tin Bronze, (2) Ingot No. 305, (3) Bushing and Bearing Bronze and (4) 80-10-10. Its many applications include bearings, bushings, impellers and pressure-tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-421. Producer or source: Copper alloy foundries.

Copper Alloy No. C93800 is a cast copper-tin-lead alloy (bronze). It is characterized by low strength, good machinability and good resistance to corrosion. Commercial names formerly used (not recommended) are (1) Anti-Acid Metal, (2) Ingot No. 319, (3) High-Leaded Tin Bronze and (4) 78-7-15. Its many applications include bearings, bushings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-464. Producer or source: Copper alloy foundries.

BERYLCO Alloy 41C is a highly castable, air-melting nickel-base alloy; it is precipitation-hardenable to high strength and hardness. It exhibits excellent resistance to wear, corrosion and oxidation. Alloy 41C (formerly called Berylco CR-1, Alloy Digest Ni-27, September 1956) is the standard beryllium-nickel casting alloy that has been in use for over 40 years. Its many uses include tooling for plastics, glass-mold tooling, fuel-pump impellers, cores for Teflon molding and deep sour-well drilling components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-251. Producer or source: Kawecki Berylco Industries Inc..

Copper Alloy No. 858 is a copper-zinc-tin-lead (yellow brass) alloy for die castings. It is a low-cost, general-purpose alloy with good machinability and soldering characteristics. Its many uses include general and marine hardware, pump, impellers, plumbing parts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-354. Producer or source: Copper alloy producers.

Copper Alloy No. 923 is a cast copper-tin-zinc-lead alloy known also as Leaded G Bronze or 87-8-1-4 alloy. This alloy possesses a good combination of strength, resistance to corrosion and machinability. It is a good alloy to withstand gas or liquid pressures. Applications include pump impellers, fittings and bearings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-355. Producer or source: Copper alloy foundries.

AISI Type 502 is a corrosion and heat resisting 5% chromium alloy steel. It is generally used in the annealed condition only. It is recommended for oil refinery and chemical plant equipment, oil pump impellers, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-211. Producer or source: Stainless steel mills.

Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

PROMET No. 3 is a leaded tin bronze possessing a good combination of physical properties and corrosion resistance. It is recommended for bearings, gears, pump bodies and impellers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-192. Producer or source: American Crucible Products Company.

BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

Duraloy CB 30 is a cast chromium steel having good corrosion resistance. It cannot be hardened by heat treatment. It is recommended for food processing and oil services at high temperatures, valve bodies, impellers and heat treating equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-225. Producer or source: Duraloy Technologies Inc..

Copper Alloy No. C93900 is a cast copper-tin-lead alloy (bronze). It has good machinability, low strength and good resistance to corrosion. This alloy formerly was known by several commercial names (not recommended); they are: (1) High-Leaded Tin Bronze and (2) 79-6-15. It is produced only in the form of continuous castings and its uses include bearings, pump bodies and impellers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-475. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-487, November 1984.

Copper Alloy No. C92700 is a cast copper-base alloy; it formerly was known as 88-10-2-0 alloy. It is characterized by a good combination of machinability, strength and resistance to corrosion. Among its many uses are bearings, pump impellers, piston rings and valve parts that are subject to liquid and or gas pressure and, therefore, must be sound (free from defects). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-477. Producer or source: Copper alloy foundries.

Copper Alloy No. C87400 is a copper-base casting alloy containing nominally 14% zinc and 3.5% silicon. It possesses a combination of high strength, good ductility and good-to-excellent resistance to corrosion. This alloy cannot be hardened nor strengthened by any thermal treatment. It is used for numerous applications such as bearings, gears, impellers and valve stems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-506. Producer or source: Copper alloy foundries.

Ni-Bral nickel-aluminum bronze is a material having high strength and good corrosion resistance. It is recommended for marine propellers, impellers, valves, gears, and shafting. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-124. Producer or source: American Manganese Bronze Company.

SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

Federalloy I-844 (C89831) is a lead-free bronze casting alloy that is machinable by alloying additions of bismuth. Applications include bearings (high speed and heavy pressure), pumps, impellers, and corrosion-resistant and pressure-tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting and joining. Filing Code: CU-611. Producer or source: Federal Metal Company.