CarTech L6 is an oil-hardening, high-carbon (0.70%), nickel-chromium, alloy cold-work tool steel. It is suitable for short run tooling in applications where a combination of high hardness and good toughness is required. The relatively high nickel content results in an alloy with greater impact toughness compared to the other common oil-hardening grades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-800. Producer or source: Carpenter Technology Corporation.

MAXI-FORM 80 is a high-strength low-alloy steel that provides superior ductility, good fatigue resistance, good weldability and outstanding impact toughness even at temperatures down to -40 F and below. It has a yield strength of 80,000 psi along with the high formability that complex parts require. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-312. Producer or source: Republic Steel Corporation.

Avesta Sheffield SAF 2304 is an austenitic/ferritic duplex stainless steel with high tensile strength, impact toughness with good workability and weldability. The alloy has high resistance to chloride stress-corrosion cracking and good resistance to pitting, crevice, and general corrosion. It has higher thermal conductivity and a lower coefficient of thermal expansion than austenitic stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-649. Producer or source: Avesta Sheffield Inc.

CPM 3V offers impact toughness (Charpy C notch) approaching the shock-resistant tool steels, but with greater wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-558. Producer or source: Crucible Materials Corporation.

Boehler W302 VMR is a hot tool steel that is manufactured and certified to meet an average impact toughness of 20 J (15 ft·lbf) minimum in Charpy V-notch testing. This die steel achieves that toughness by vacuum melting and remelting. Applications include dies, die holders, liners, and stems. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as heat treating. Filing Code: TS-581. Producer or source: Böhler Uddeholm N.A.

Timken Latrobe Steel TLP A11 is a powder metallurgically produced A11 type of tool steel that is air hardening. It provides high wear resistance and a relatively high impact toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-584. Producer or source: Timken Latrobe Steel.

TLP M4 is a powder metallurgy produced high-speed tool steel with a combination of wear resistance, high impact toughness, and transverse bend strength. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating. Filing Code: TS-586. Producer or source: Timken Latrobe Steel.

DuraTech Xtreme has very high impact toughness, high hot hardness, and good wear resistance. As indicated in the name, the alloy is intended for use in extreme” conditions. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and powder metal forms. Filing Code: TS-663. Producer or source: Latrobe Specialty Steel Company.

RUUKKI RAEX 300 (typical yield strength 900 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-643. Producer or source: Rautaruukki Corporation.

RUUKKI RAEX 400 (typical yield strength 1000 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-646. Producer or source: Rautaruukki Corporation.

RUUKKI RAEX 450 (typical yield strength 1200 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-656. Producer or source: Rautaruukki Corporation.

LSS H12 is a general-purpose hot work tool steel with excellent impact toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-706. Producer or source: Latrobe Specialty Steel Company. See also Alloy Digest TS-686, January 2010.

RUUKKI RAEX 500 (typical yield strength 1250 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-658. Producer or source: Rautaruukki Corporation.

Inco-Weld C-276 Welding Electrode (ENiCrMo-4) is a NiCrMo welding electrode with increased Mo, W, and reduced Nb. The alloy offers strength levels consistently exceeding the minimum requirement of the 9% nickel steels and excellent Charpy impact toughness at –196 deg C (–321 deg F). This datasheet provides information on composition and tensile properties. It also includes information on joining. Filing Code: Ni-754. Producer or source: Special Metals Welding Products Company.

Strenx™ 1100 Plus is a high-strength, hot-rolled, quenched and tempered, structural steel with a minimum yield strength of 1100 MPa (160 ksi) and very good weld performance. The strength, elongation, and impact toughness of weldments fulfill minimum guarantees of the base metal. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-856. Producer or source: SSAB Swedish Steel, Inc..

Timken Latrobe Steel TLP Nine is made by powder metallurgy. It is an air-hardening tool steel with very high wear resistance and high impact toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as heat treating and machining. Filing Code: TS-585. Producer or source: Timken Latrobe Steel.

Whitebear is an 8% Cr, cold work tool steel with lower carbon than similar grades, which improves the impact toughness. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-652. Producer or source: Timken Latrobe Steel.

Inco-Weld C-276 (ERNiCrMo-4) is a NiCrMo filler metal with increased molybdenum, tungsten, and reduced niobium and is suited to both gas metal arc welding (GMAW) or gas tungsten arc welding (GTAW) processes, either manually or fully automated. The alloy offers strength levels consistently exceeding the minimum requirement of the 9% Ni steels, excellent Charpy impact toughness at −196 deg C (−321 deg F), and improved wire delivery to the weld pool resulting from controlled filler metal processing. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Ni-657. Producer or source: Special Metals Welding Products Company.

Boehler (or Böhler) S290 Microclean is a high-speed steel made by powder metallurgy which impacts toughness and machinability. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating and powder metal forms. Filing Code: TS-675. Producer or source: Böhler-Uddeholm North America.

LSS H11 is a hot-work tool steel with excellent impact toughness. It is used where resistance to cracking is needed. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-677. Producer or source: Latrobe Specialty Steel Company.