AMDRY 754 is a nickel-base alloy formulated to provide good resistance to combinations of abrasion, corrosion, heat, impact shock and oxidation. It is deposited by spraying on the desired surface at a thickness usually limited to a maximum of 0.080 inch. Properties are on the deposit. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and powder metal forms. Filing Code: Ni-199. Producer or source: Alloy Metals Inc..

BUSTER ALLOY 60 is a widely accepted tungsten shock-resisting tool steel. Its performance is unequalled in most shock and impact tools used under very demanding conditions. It is deep hardening and combines this quality with excellent wear resistance and good toughness. Buster Alloy 60 will withstand repeated heating to 700-800 F, when used in lower temperature hot-work applications. Among its many uses are shear blades, hand chisels, pneumatic tools, coining dies, hot-heading dies, forging dies and machine parts. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-455. Producer or source: Columbia Tool Steel Company.

CYCLOPS S2 is a high-silicon, shock-resisting tool steel with extreme toughness. It has good ductility and toughness at high strength levels, and gives excellent service in those applications where shock and impact are major factors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-328. Producer or source: Cyclops Corporation.

CPM 3V offers impact toughness (Charpy C notch) approaching the shock-resistant tool steels, but with greater wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-558. Producer or source: Crucible Materials Corporation.

SILAFONT-5 is a heat treatable aluminum casting alloy recommended for sand and die castings. It has high strength, medium elongation, good corrosion resistance. It is suited for castings subject to impact and shock. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-172. Producer or source: Swiss Aluminium Ltd.

Durax-W2 is a chromium, tungsten alloy steel recommended for normal hot working tools. It is shock and impact resistant. It is characterized by high toughness, fatigue resistance and relative ease of heat treatment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-183. Producer or source: Marathon Specialty Steels Inc..

SIMOCH is a low alloy tool steel having high shock resistance, high impact strength and excellent wear resistance. It is recommended for many hot work and cold work applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-186. Producer or source: Teledyne Vasco.

AISI 9260 is an oil-hardening type of spring steel and tool steel recommended for repeated and severe impact service. It is also used for heavy duty, shock resistant machine parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-167. Producer or source: Alloy steel mills and foundries.

TIMANG is an austenitic, non-magnetic steel of the high manganese type. It is extremely wear and abrasion resistant when work-hardened. It is tough and shock resistant when subjected to impact loads. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear and bend strength as well as fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-174. Producer or source: Taylor-Wharton Company, Division of Harsco Corporation.

AISI 6145 is a tough, shock resisting, shallow-hardening chromium-vanadium steel. It has high fatigue and impact resistance in the heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-107. Producer or source: Alloy steel mills and foundries.

AISI 6150 is a tough, shock resisting, shallow-hardening chromium-vanadium steel. It has high fatigue and impact resistance in the heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-26. Producer or source: Alloy steel mills and foundries.

BELMONT ALLOY 18912 is an aluminum casting alloy containing 0.8% magnesium and relatively high copper and nickel along with its 6.5% tin. The composition makes the alloy suitable for bearing applications requiring operation at relatively high temperatures and with good resistance to thermal stresses. Sand and permanent-mold castings comprise its main use. It is particularly well suited for shock or impact loads. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-230. Producer or source: Belmont Metals Inc..

CARPENTER S7 is a general-purpose air-hardening tool steel characterized by high resistance to impact and shock. It has good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot-work and cold-work applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-329. Producer or source: Carpenter.

AISI 9261 is a silicon-manganese shock resisting steel recommended for repeated and severe impact service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-70. Producer or source: Alloy steel mills and foundries.

CYCLOPS S1 (formerly Alco M) was originally developed for chisel and pneumatic tool purposes. It is now used for many other cold and hot work applications because of its outstanding toughness and resistance to fatigue. It gives excellent results in those instances where shock and impact are major factors. It may be carburized for those applications where high wear resistance and great core strength are required. Its many applications include shear blades, rivet busters and forging dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-352. Producer or source: Cyclops Corporation.

GUTERL S-5 is a shock-resisting steel recommended for severe and repeated impacts in service. It has an excellent combination of toughness and hardness to survive the high stresses in service and to resist abrasion and wear. It is normally hardened by austenitizing and quenching in oil but it can be water quenched successfully with proper precautions. Its many uses include hammers, hand chisels, boiler punches, shear blades and pneumatic tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-357. Producer or source: Guterl Special Steel Corporation.

ABEX PARABOLOY is a high-chromium cast iron produced under strictly controlled foundry conditions and heat treated to furnish two grades: PAB and PAC. PAB provides excellent wearlife in heavy-section castings for mill liners and selected crusher parts. PAC provides excellent service in applications requiring greater resistance to shock and impact. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: CI-49. Producer or source: Abex Corporation, Armsco Division.

MOSIL is intended for applications requiring high toughness and resistance to shock loading. It is recommended for severe and repeated impacts in service. It has an excellent combination of hardness and toughness to withstand the high stresses in service and to resist abrasion and wear. Normally, it is hardened by austenitizing and quenching in oil. Among the many uses of Mosil are hand chisels, hammers, rivet sets, concrete breakers and heavy-duty punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, joining, and surface treatment. Filing Code: TS-400. Producer or source: Teledyne Vasco.

Crucible S7 XL is a double-refined high-purity grade of S7 tool steel (see Alloy Digest TS-543, July 1996) designed specifically for ease of wire electrical discharge machining (EDM) operations, improved consistency in texturizing of plastic injection molds, and superior shock resistance compared to conventional S7. Typical applications include plastic injection molds, punches and dies by wire EDM, and heavy impact tools. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-562. Producer or source: Crucible Service Centers. Originally published November 1998, revised 2005.

AL TECH ARAPAHO is an air-hardening or oil-hardening tool steel depending on the size, tool geometry and other desired propties. It has exceptional toughness coupled with resistance to softening at moderately high temperatures. It is used for general blanking and forming-die applications; it also is used for impact and shock-resisting tools. Its many uses include shear blades, chisels, punches, rivet sets and mold dies for plastics. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: TS-475. Producer or source: AL Tech Specialty Steel Corporation.