1-20 of 56 Search Results for

hydraulic tubing applications

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (2009) 58 (1): Al-420.
Published: 01 January 2009
... outstanding forming capability as well as a very good weldability. Applications: Alloy 5086 is used for hydraulic tubes and several other applications. Table 1 Mechanical properties Thickness, mm (in.) O/H111 H12/H32 H14/H34 H16/H36 H18(a) 20 ( 0.75) 10 ( 40) 5 ( 0.2) 3 ( 0.125) 20 (0.75) Tensile...
Journal Articles
Alloy Digest (1998) 47 (9): Ti-114.
Published: 01 September 1998
... TIMETAL 3-2.5 (Ti-3%Al-2.5%V) alloy is cold formable and weldable. This alloy is used primarily for honeycomb foil and hydraulic tubing applications. Industrial applications, such as pressure vessels and piping, also utilize this alloy. The alloy is available with palladium stabilization to...
Journal Articles
Alloy Digest (2005) 54 (7): SA-548.
Published: 01 July 2005
... Ovahyd 700 24 75 55 205 25 Applications: These alloys are used for highly stressed hydraulic components, such as hydraulic cylinders and piston rods, with high demands on low weight and high impact toughness at low temperatures. To optimize performance the end user must balance the design and in-service...
Journal Articles
Alloy Digest (2019) 68 (9): SA-852.
Published: 01 September 2019
... Characteristics IHCP and CPO steel bars and tubes meet specific needs for piston rod material in hydraulic and pneumatic cylinders. They are readily available in standard and custom sizes, chemistries, and plating thicknesses to meet most piston rod applications. The producer uses the most advanced techniques of...
Journal Articles
Alloy Digest (2009) 58 (12): Al-427.
Published: 01 December 2009
... hydraulic tubes and several other applications. Because it is a tightly controlled process, Alcan tubes exhibit outstanding forming capability, as well as very good weldability. Table 1 Mechanical properties O T4 T6 20 mm ( 0.75 in.) 20 mm ( 0.75 in.) 20 mm ( 0.75 in.) Tensile strength, MPa (ksi) L 150...
Journal Articles
Alloy Digest (2002) 51 (1): SS-841.
Published: 01 January 2002
... solution for water-based hydraulic fluids. Product Forms Available: Seam-welded tubing Applications: Long coils of subsea umbilical tubing is the major application for this product. Table 2 Comparison of Physical Properties for Various Austenitic and Duplex Stainless Steels at Approximately 20 ºC (68 °F...
Journal Articles
Alloy Digest (2019) 68 (1): Al-457.
Published: 01 January 2019
... Available in cold finished and extruded pipe and tube. Applications Typically used in hydraulic tube and appliance applications. Producer Kaiser Aluminum Corporation Foothill Ranch, CA 92610, USA Tel: +1-949-614-1740 www.kaiseraluminum.com ISSN: 002-614X Al-457B Table 2 Comparative characteristics Temper...
Journal Articles
Alloy Digest (1983) 32 (7): Ti-85.
Published: 01 July 1983
... with outside diameters ranging from /4 in. (6.4 mm) to llh in. (38.1 mm)in anumber ofwall thicknesses. hot-rolled plate and cold-rolled sheet. Applications: Seamless tubing of CABOT Ti-3Al-2.5V was developed for aircraft hydraulic and fuel systems. Its performance has been proven in high technology...
Journal Articles
Alloy Digest (2017) 66 (1): Al-451.
Published: 01 January 2017
... endurance limit, R.R. Moore type, MPa (ksi) 110 (16) Modulus of elasticity, GPa (106 psi) 70 (10.2) Specification Equivalents: ASTM B807 (Extrusions) General Characteristics: One of the magnesium alloys typically used in hydraulic tube and appliance applications. Good corrosion resistance and good...
Journal Articles
Alloy Digest (2008) 57 (1): Ti-145.
Published: 01 January 2008
... metal- lographically as well as tested for conformance to the chemical composition and mechanical property requirements of the applicable specification. Applications: Seamless tubing of this alloy was developed for aircraft hydraulic and fuel systems. Performance has been proven in high-technology...
Journal Articles
Alloy Digest (1984) 33 (10): Cu-485.
Published: 01 October 1984
... Alloy No. Cl9200 comprise air conditioning and heat exchanger tubing, applications requiring resistance to softening and stress corrosion, automotive hydraulic brake lines, cable wrap, circuit breaker components, contact springs, electrical connectors and terminals, eyelets, flexible hose, fuse clips...
Journal Articles
Alloy Digest (2005) 54 (6): SA-544.
Published: 01 June 2005
... to tubes with outer diameters 55 205 mm. Applications: This steel is used in hydraulic components, such as hydraulic cylinders and piston rods, with demands on low weight and high impact toughness at low temperatures. To optimize performance, the end user must balance the design and in-service...
Journal Articles
Alloy Digest (1970) 19 (2): SS-234.
Published: 01 February 1970
... temperatures from 1500 to 1650oF. The sbucture at room temuerature is low-carbon martensite. Hardenine is ac- complished by precipitation of titanium compounds on-reheat- ing at 900 to 11OOoF. Forms Available: Bars, strip, sheet, plate, wire and tubing. Applications: Aircraft and missile structures, hydraulic...
Journal Articles
Alloy Digest (1999) 48 (1): Al-357.
Published: 01 January 1999
... Kaiser Aluminum Alloy 2024 has good machinability and good mechanical properties. The alloy is typically used in aircraft structures, rivets, connectors, hydraulic valve bodies, and miscellaneous structural applications. This datasheet provides information on composition, physical properties...
Journal Articles
Alloy Digest (1977) 26 (6): Cu-334.
Published: 01 June 1977
... AMPCOLOY C-3 is a copper-aluminum-iron alloy with high strength and hardness, good toughness, good resistance to fatigue and wear, and good corrosion resistance. It is used for heavy loads in such applications as bearings, gears and hydraulic valve parts. It is suited for service up to 750 F. This...
Journal Articles
Alloy Digest (1985) 34 (4): Cu-495.
Published: 01 April 1985
... characteristics and can be joined by several methods. Among its many applications are air conditioners, gas lines, heater lines, oil-burner and plumbing tubes, dairy tubes and oil lines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also...
Journal Articles
Alloy Digest (2009) 58 (2): Cu-766.
Published: 01 February 2009
... are essential. Tube applications include industrial piping and rigid conduit. Producer: Ansonia Copper & Brass, Inc. Waterbury, CT 06708 Tel: 800-512-1703; 203-735-3787 www.ansoniacb.com ISSN: 002-614X Cu-766B ...
Journal Articles
Alloy Digest (2018) 67 (3): SS-1281.
Published: 01 March 2018
... welding, Ferro-Titanit is particularly used in forming and cutting tools, hydraulic jacks for polymer production, and pelletizing and granulating cutter blades. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on heat...
Journal Articles
Alloy Digest (2016) 65 (2): SA-742.
Published: 01 February 2016
... Induction hardened Cromax IH 482 is based on a medium carbon, microalloyed steel, which is characterized by high strength in the as-rolled condition, i.e., without heat treatment. The alloy is used for the manufacture of piston rods, pistons, and eyes for hydraulic cylinders. This datasheet...
Journal Articles
Alloy Digest (1997) 46 (9): Ti-109.
Published: 01 September 1997
... Sandvik Ti-3Al-2.5V Grade 9 titanium-aluminum alloy offers excellent corrosion resistance, especially to chloride media, and has a high strength-to-weight ratio, which is especially suitable for use in aerospace applications. Tubing can be produced having a CSR (contractile strain ratio) that...