Search Results for hydraulic lines

Ansonia alloy C65100 is often called low silicon bronze and is used in aircraft hydraulic lines, various screws, and as pole line hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-766. Producer or source: Ansonia Copper & Brass Inc.

Kaiser Alloy 7075 in pipe and tube is used in hydraulic lines. This alloy is covered in Alloy Digest Al-368, March 2000, but that datasheet is for screw machining bar stock whereas this one includes tube and pipe data. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as joining. Filing Code: Al-457. Producer or source: Kaiser Aluminum Corporation.

Kaiser alloy 5052 in pipe and tube is used in hydraulic lines. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on forming, machining, and joining. Filing Code: Al-451. Producer or source: Kaiser Aluminum Corporation.

Copper Alloy No. C19200 is a high-copper alloy with relatively high strength and electrical conductivity. It has good hot forgeability and good capacity for being cold worked. Among its many uses are applications requiring resistance to softening and stress corrosion, automotive hydraulic brake lines, cable wrap, eyelets, flexible hose and fuse clips. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-485. Producer or source: Copper and copper alloy mills.

MUELLER Copper 1220 is a deoxidized copper with high residual phosphorus (nominally 0.02%). It has rather low electrical conductivity but it is not susceptible to embrittlement by hydrogen. Its low electrical conductivity is mainly caused by the phosphorus. It has excellent cold-working characteristics and can be joined by several methods. Among its many applications are air conditioners, gas lines, heater lines, oil-burner and plumbing tubes, dairy tubes and oil lines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-495. Producer or source: Mueller Brass Company.

Cupro Nickel, 30%-716 is a high strength copper-nickel-iron alloy for heat exchanger tubes in power plant feed water heaters, and also for oil refinery service. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, joining, and surface treatment. Filing Code: Cu-200. Producer or source: Anaconda American Brass Company.

Cupro Nickel, 30%-707 is a high strength copper-nickel-iron alloy for heat exchanger tubes in power plant feedwater heaters. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, joining, and surface treatment. Filing Code: Cu-133. Producer or source: Anaconda American Brass Company.

Sandvik Ti-3Al-2.5V Grade 9 titanium-aluminum alloy offers excellent corrosion resistance, especially to chloride media, and has a high strength-to-weight ratio, which is especially suitable for use in aerospace applications. Tubing can be produced having a CSR (contractile strain ratio) that enhances the fatigue endurance limit. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: TI-109. Producer or source: Sandvik.

ANACONDA Copper 122 is deoxidized copper with high residual phosphorus. It is a medium-strength material with high ductility and excellent hot and cold workability. It is the copper-base material used most widely in the production of tube and pipe for a wide variety of uses including the air-conditioning, refrigeration, heating and plumbing industries. Anaconda Copper 122 also is used as wrought plating anodes in the acid-copper plating industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-400. Producer or source: Anaconda American Brass Company.

COPPER No. 122 is a deoxidized copper with high residual phosphorus. It is not susceptible to hydrogen embrittlement but has rather low electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-253. Producer or source: Copper and copper alloy mills.

UDDEHOLM AISI 52100 is an extremely versatile high-strength steel available in strip form. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on heat treating. Filing Code: SA-461. Producer or source: Uddeholm Corporation.

Ovako 280 is a clean structural steel with heat-to-heat consistency for production economy. Ovako CEAX 280 is a precision bar version with straightness, roundness, surface finish, and diameter tolerances that are tighter than average. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-552. Producer or source: Ovako Steel Inc.

SAE 660 (CDA 932) ALLOY is the standard cast bronze bearing material. It has general utility for medium loads and speeds. Properties and characteristics given herein are for centrifugally cast material. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: Cu-571. Producer or source: Federated Bronze Products Inc..

Ferro-Titanit Nikro 143 is one of a series of metal-matrix composites manufactured by a powder metallurgy process and is a range of carbide-alloyed materials from Deutsche Edelstahlwerke. The Nikro 143 grade is an iron-base alloy containing 30 wt.% titanium carbide. Because of its high wear resistance and low tendency toward cold welding, Ferro-Titanit is particularly used in forming and cutting tools, hydraulic jacks for polymer production, and pelletizing and granulating cutter blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive, shear, and bend strength as well as fracture toughness. It also includes information on heat treating. Filing Code: Fe-168. Producer or source: Deutsche Edelstahlwerke GmbH.

MTD 2 is mold base quality, Mn-Cr-Mo plate steel. It is commonly used in holder blocks, clamping plates, and support plates. ArcelorMittal USA MTD steels comprise a family of pre-hardened alloy plate steels developed for a variety of mold, tool, and die applications. This datasheet provides information on composition. It also includes information on forming, machining, and joining. Filing Code: SA-794. Producer or source: ArcelorMIttal USA, Plate.

MUELLER 721 is one of the strongest of all nonferrous alloys, having high tensile properties and superior corrosion resistance. It is recommended for gears, bearings, valve stems and screw machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-167. Producer or source: Mueller Brass Company.

MTD 1 is a 4140 plate steel modified with slightly higher carbon and a vanadium addition. Vanadium improves graining refinement and, coupled with the higher carbon, promotes hardness and wear resistance. ArcelorMittal USA MTD steels comprise a family of pre-hardened alloy plate steels developed for a variety of mold, tool, and die applications. This datasheet provides information on composition. It also includes information on forming, machining, and joining. Filing Code: SA-793. Producer or source: ArcelorMittal USA, Plate.

COPPER ALLOY No. 655 is a high-silicon copper alloy which has good mechanical properties and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-248. Producer or source: Copper and copper alloy mills.

ALUMINUM 7079 is a high strength alloy especially applicable to highly stressed aircraft parts in thick sections. It responds to age-hardening heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-84. Producer or source: Aluminum Company of America.

COPPER ALLOY No. 651 is a low-silicon bronze which has excellent mechanical properties and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-247. Producer or source: Copper and copper alloy mills.