Search Results for heavy components

METGLAS MBF-30A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-30, is identical except that it has larger dimensional tolerances). This foil provides an alloy with high strength at both elevated and room temperatures. It can be used to join highly stressed stainless steel and heat-resisting alloy components. The excellent flow characteristics of this alloy recommend it for assemblies with good fit-up and tight-tolerance joints. It works well on thin-foil, honeycomb designs and on fairly heavy components. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on heat treating. Filing Code: Ni-273. Producer or source: Allied Corporation.

Ni-Hard Type 4 is a wear-resistant martensitic white iron with improved resistance to fracture under repeated impact. It is recommended for jaw crushers, hammer mills, pulverizers and similar heavy duty wear resistant components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: CI-34. Producer or source: Alloy iron foundries.

Jessop-Saville H.27 is a medium carbon, chromium-molybdenum nitriding steel recommended for components subjected to heavy stresses and severe wear, such as crankshafts and air-screw shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-164. Producer or source: Jessop-Saville Ltd, Brightside Works.

FERRO-TIC CM is a cemented carbide comprising titanium carbide in a matrix of high-chromium tool steel. It is machinable and heat treatable by conventional means, and is recommended for heavy stamping or forming tools and wear-resistant components. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-253. Producer or source: Chromalloy American Corporation, Sintercast Division.

Alloy Steel 3.5Ni-1.8Cr-0.4Mo-0.1V is highly suitable for massive components, usually more than four inches thick. It has high hardenability which in a water-spray or water-immersion quench contributes to the formation of sizeable amounts of martensite along with some bainite, and possibly a little ferrite. On tempering, the martensite adds to toughness and lowers the temperature of transition from tough to brittle failure. This steel is suitable for intermediate-duty and heavy-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-404. Producer or source: Alloy steel mills and foundries.

SAE 4820 is a low-carbon (nominally 0.20%) carburizing steel containing nominally 3.5% nickel and 0.25% molybdenum. It is deal for used that require a strong, tough core along with a highly wear-resistant carburized case. In addition, it offers a good combination of strength and low-temperature toughness for non-carburized applications. It is recommended for a wide range of moderately heavy-duty applications. Among its many uses are carburized gears, carburized aerospace components and non-carburized machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-409. Producer or source: Alloy steel mills and foundries.

LESCALLOY 4340 VAC-ARC is a low-alloy steel that can be heat treated to high strength levels. It has a good combination of strength, ductility and toughness along with high hardenability. It is produced by the vacuum-consumable-electrode process to provide optimum cleanliness and preferred ingot structure. It is used for aircraft components including retainer rings for critical bearings and other heavy-duty applications. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-361. Producer or source: Latrobe Steel Company.

TIMKEN CBS 1000M is a specialty carburizing steel for service up to 800 F in bearings, gears and other components used to transmit power. It is ordinarily supplied vacuum melted for bearings, gears, and other heavy-duty items. For other less stringent applications, it is standard practice to supply CBS 1000M vacuum degassed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-368. Producer or source: Timken Company Steel Divison.

ARMCO SSS 100A is a low-carbon, fine-grained, quenched-and-tempered alloy steel. It is strong, tough and readily fabricated with equipment and facilities suited to its high strength. It has a minimum yield strength of 100,000 psi. Among its many uses are structural components in heavy-duty trailers, buildings, bridges, ships, mobile drilling rigs and pressure vessels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-380. Producer or source: Armco Inc., Southwestern Steel Division.

PremoMet offers superior strength, toughness and fatigue resistance and may be considered as a lower-cost alternative to many cobalt containing steel alloys. Consider PremoMet alloy for high-demand power train components in heavy-duty diesel engines and other commercial ground transportation including locomotive. This datasheet provides information on composition, hardness, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SA-617. Producer or source: Carpenter Specialty Alloys.

Atlas 316 is a chromium-nickel-molybdenum austenitic stainless steel, second only to Atlas 304 in commercial importance. The molybdenum gives Atlas 316 better overall corrosion resistant properties than type 304 austenitic stainless steel, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed, welded, soldered, and cut by both thermal and mechanical methods. The austenitic structure gives excellent toughness, even down to cryogenic temperatures. Atlas 316L, the low carbon version of Atlas 316, is highly resistant to sensitization (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components; about 5 mm, 0.2 in., and over. Atlas 316H, with its higher carbon content, has some application at elevated temperatures, as does stabilized type 316Ti. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1365. Producer or source: Atlas Steels.

SAE 1078 is high-carbon steel of low hardenability. It can be hardened by quenching from the austenitizing temperature into oil or water; care must be exercised to prevent cracking when quenching into water. This steel develops high surface hardness and a soft core on quenching and tempering lightly. It has good wear resistance. Its many uses include agricultural equipment, tools, springs and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-83. Producer or source: Carbon steel mills.

AISI 1086 is a high-carbon water of oil-hardening steel of low hardenability. It is used for music wire, tools springs, machinery parts and many other applications. It develops high surface hardness on quenching and tempering lightly and has good wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-57. Producer or source: Carbon steel mills.

UNS No. G10860 is a high-carbon oil or water-hardening steel of low hardenability. It develops high surface hardness on quenching rapidly and tempering lightly and it has good resistance to wear. It is used for tools, springs, music wire, machinery parts and many other applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-112. Producer or source: Carbon steel mills.

Alloy Steel 5Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite or ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears, ship forgings, and many other thick-section components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-403. Producer or source: Alloy steel mills and foundries.

Alloy Steel 3.5 Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite of ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-400. Producer or source: Alloy steel mills and foundries.

ZA-27 is a zinc-aluminum-copper alloy that offers exceptionally high strength (58,000 to 64,000 psi tensile strength as cast) at modest cost. It performs best in thin-walled castings (down to 0.10 inch) which means reduced weight and lower material costs when castings are redesigned. It is similar to the general-purpose ZA-12 alloy (Alloy Digest Zn-31, September 1977) except for its higher strength and elongation, but with higher casting temperatures and poor heavy-section castability. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-32. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-50, June 1990.

Mecasteel 145 is a steel grade delivered in prehardened condition (yield strength > 1000 MPa, or > 145 ksi) and available in very large dimensions (width 2 m, or 78 in.; thickness up to 635 mm, or 25 in.). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: SA-703. Producer or source: Industeel USA, LLC. Originally published as Alloy Digest SA-691, February 2014, revised July 2014.

Mecasteel 145 (minimum yield strength 145 ksi) is a high-strength prehardened steel that can be used in substitution for conventional steels, such as AISI 4330, in the manufacture of massive steel components such as machines, hydraulic systems, and pumps. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: SA-691. Producer or source: Industeel USA, LLC. Revised as Alloy Digest SA-703, July 2014.

RUUKKI RAEX 400 (typical yield strength 1000 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-646. Producer or source: Rautaruukki Corporation.