Search Results for heat conductivity

CMW 353 alloy is a Ni-Si-Cr-Cu high-strength high-conductivity alloy. It has high hardness combined with toughness. This combination gives the alloy excellent wear resistance and makes it useful for flash welding dies, back-up bars, and bushings in current-carrying bearings when used in combination with CMW 3 (see Alloy Digest Cu-85, August 2000) shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: CU-656. Producer or source: CMW Inc.

Boehler Uddeholm alloy BeCu172 is a high-strength beryllium copper mold with high thermal conductivity. BeCu Alloy 172 can be supplied in the high-hard (HH) condition at approximately 40 HRC and in the low-hard (LH) condition at approximately 30 HRC. This alloy is used for applications such as pinch-offs and neck rings for blow molds, cores, and inserts in injection molds and injection nozzles and manifolds for hot runner systems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-781. Producer or source: Böhler-Uddeholm Corporation.

MALLORY 53B is an economical copper alloy combining high strength with high heat and electrical conductivity and excellent corrosion resistance. It is heat treatable. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-155. Producer or source: P. R. Mallory & Company Inc..

Rheinfelden Castasil-21 (Ci-21, AlSi9Sr) is an aluminum-silicon-iron-strontium high pressure die casting (HPDC) alloy. It was developed by Rheinfelden Alloys GmbH and Co. KG for castings that require an outstanding combination of electrical and/or thermal conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-476. Producer or source: Rheinfelden Alloys GmbH.

BOHNALITE-Y is a heat treatable aluminum casting alloy recommended for high temperature applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-60. Producer or source: Bohn Aluminum & Brass Corporation.

Copper Alloy No. 879 is a copper-zinc-silicon (silicon brass) alloy for die casting. It is a general-purpose alloy with moderate strength for such applications as tools, hardware, gears and plumbing parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-335. Producer or source: Copper alloy die casters.

Schmelzmetall Hovadur CCZ is a heat-treatable, copper-chromium-zirconium alloy. In the solution heat-treated and artificially aged condition, this alloy exhibits high thermal and electrical conductivity along with high strength and a high softening temperature. Hovadur CCZ evolved from CuCr1 (CW105C), a precipitation-hardenable alloy first made in the 1930s for spot welding electrodes, for which strength and hardness at temperatures up to 500 °C (930 °F), as well as good electrical and thermal conductivity, are essential. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-912. Producer or source: Schmelzmetall AG.

AISI TYPE 314 is an austenitic chromium-nickel stainless steel with the highest heat resisting properties of any of the chromium-nickel steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-100. Producer or source: Stainless steel mills. Originally published February 1960, revised October 1988.

Copper Alloy No. 858 is a copper-zinc-tin-lead (yellow brass) alloy for die castings. It is a low-cost, general-purpose alloy with good machinability and soldering characteristics. Its many uses include general and marine hardware, pump, impellers, plumbing parts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-354. Producer or source: Copper alloy producers.

Aurubis Cu-DLP is a phosphorus-deoxidized copper that contains a minimum of 99.90% copper and a small amount of residual phosphorus. Owing to the presence of residual phosphorus, the electrical conductivity of Aurubis Cu-DLP is lower than that of the high-conductivity and oxygen-free coppers (Cu-ETP, Cu-FRHC, and Cu-OF). Its conductivity is, however, higher than that of Cu-DHP and Cu-HCP. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-928. Producer or source: Aurubis AG.

Copper Alloy No. 815 is an age-hardenable cast copper-chromium alloy. It is characterized by high electrical and thermal conductivities combined with medium hardness and strength in the age-hardened condition. It is used for components requiring high electrical conductivity or high thermal conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-332. Producer or source: Copper alloy foundries.

Copper Alloy No. C18700 is a copper-base alloy containing lead (nominally 1.0%). The lead is added to impact free-cutting properties to the metal. Although the lead lowers the electrical conductivity of Alloy No. C18700 slightly below that of tough-pitch copper, it still has high electrical conductivity well within the limits needed for most current-carrying requirements. Typical uses comprise electrical motor and switch parts, electrical connectors and screw-machine parts requiring high conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-441. Producer or source: Copper and copper alloy mills.

Copper No. C80100 is a casting copper with high electrical conductivity (100% IACS). It has low room-temperature strength and hardness and medium-to-good ductility. It has excellent thermal conductivity and good resistance to corrosion, these characteristics make it highly suitable for many applications requiring good electrical and or thermal conductivity and resistance to corrosion and oxidation. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-521. Producer or source: Copper alloy foundries.

CDA C18700 is a copper-base alloy containing lead (nominally 1.0%). The lead is added to impart free-cutting properties to the metal. Although the lead lowers the electrical conductivity of CDA C18700 slightly below that of tough-pitch copper, it still has high electrical conductivity well within the limits needed for most current-carrying requirements. Typical uses comprise electrical motor and switch parts, electrical connectors and screw-machine parts requiring high conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-533. Producer or source: Copper and copper alloy mills.

PERMANICKEL alloy 300 is an age-hardenable high-nickel alloy similar to DURANICKEL alloy 301 in its strength and corrosion resistance, but having higher thermal and electrical conductivity. The alloy is somewhat difficult to heat treat, and DURANICKEL alloy 301 is recommended in preference to it except for applications requiring its superior conductivity or magnetic properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-126. Producer or source: The International Nickel Company Inc..

Copper alloy No. 190 is an intermediate strength phosphor bronze having a combination of high electrical conductivity and endurance strength. It responds to an age hardening heat treatment offering an endurance strength of 39000 psi. It is recommended for springs, conductors, fasteners, etc. where a combination of high strength, high electrical and thermal conductivity, high resistance to fatigue and creep are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-206. Producer or source: Copper and copper alloy mills.

Meehanite GA350 is a heat-treatable, pearlitic gray cast iron that exhibits high strength while still maintaining good thermal conductivity and good machinability. It is generally used for applications where the thermal conductivity requirements preclude the use of other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: CI-72. Producer or Source: Meehanite Metal Corporation.

Aurubis Cu-ETP (electrolytic tough pitch copper) is an electrolytically refined, high conductivity copper that contains a minimum of 99.90% Cu and a controlled amount of oxygen (generally 0.02–0.04%). It has a minimum electrical conductivity of 100% IACS. Special precautions are necessary when heat treating, welding, or brazing Aurubis Cu-ETP in atmospheres containing hydrogen so as to avoid hydrogen embrittlement. Cu-ETP is the most widely used grade of copper in electrical applications and represents over half of global copper use. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Cu-922. Producer or source: Aurubis AG.

MUELLER COPPER 1470 is a high-conductivity copper to which sulfur has been added to provide free-machining characteristics. Thus it is well suited for screw-machine work. Its electrical conductivity and corrosion resistance approach those of copper but it has higher strength and better machinability. Among its many specific applications are plumbing fittings, electrical connectors, screws, cold-heated and machined parts and cold forgings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-440. Producer or source: Mueller Brass Company.

FEDERATED F401.5Ni is a heat-treatable aluminum casting alloy with high strength and good wear resistance in the fully heat-treated condition. It is recommended for castings requiring good strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-212. Producer or source: Federated Metals Corporation, ASARCO Inc..