Search Results for hardness

NJZ ALLOY No. 15 is a high-strength alloy with high stiffness and limited bending characteristics. It is produced from high-grade zinc base with additions of lead, copper, cadmium and magnesium. It can be severely work hardened and its applications include weather-stripping and hardware. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-21. Producer or source: New Jersey Zinc Company.

THYRAPID 3247 is a super high-speed tool steel able to attain a hardness of Rc 66/68 with nominal heat treatment. The higher hardness finds favor for special purpose cutting tools with requirements beyond the capability of general purpose high-speed steels. The alloy is similar to AISI M42. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-513. Producer or source: Thyssen Specialty Steels Inc..

AerMet 100 alloy possesses a combination of high strength, hardness, toughness and good resistance to stress-corrosion from chlorides. It can be used for many aerospace applications such as landing gear and fasteners. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on heat treating. Filing Code: FE-107. Producer or source: Carpenter.

Carpenter Stainless Type 416BQ is a modification of Type 416 to achieve a minimum hardness of 40 HRC when bright hardened, while retaining nearly the machinability of Type 416. Typical applications are cutters in food processing. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-807. Producer or source: Carpenter.

CIRCLE C (AISI T5) tool steel combines increased wear resistance from higher vanadium and carbon contents with higher red hardness due to 8 to 9% cobalt content. This datasheet provides information on composition and hardness as well as fracture toughness, and deformation. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-502. Producer or source: Teledyne Vasco.

K12 has a Ni-Mo-Cr alloy steel composition and possesses an appropriate combination of hardness and toughness mandatory for proper ballistics performance. K12 plate is normally supplied in the annealed condition so that it may be more easily cut and formed into the desired configuration. It may also be supplied as heat treated parts cut to the final configuration. This datasheet provides information on physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SA-560. Producer or source: Allegheny Ludlum.

NI-HARD is a white cast iron alloyed with nickel and chromium to give high hardness and outstanding resistance to abrasion. The structure consists of hard carbide matrix rendered martensitic by the nickel content. The wearing faces of heavy castings may be chilled, thus giving a white iron face, backed by grey cast iron where the metal has cooled more slowly. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-9. Producer or source: Allen-Sherman-Hoff Pump Company.

KENTANIUM K151A is a titanium carbide cermet having high heat and oxidation resistance along with very high wear and abrasion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on machining and joining. Filing Code: Ti-49. Producer or source: Kennametal Inc..

Ni-Hard Type 4 is a wear-resistant martensitic white iron with improved resistance to fracture under repeated impact. It is recommended for jaw crushers, hammer mills, pulverizers and similar heavy duty wear resistant components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: CI-34. Producer or source: Alloy iron foundries.

DELORO STELLITE-100 is a hard and abrasion resistant alloy designed specifically for metal cutting purposes. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Co-55. Producer or source: Deloro Stellite Ltd.

AIR HARD is an air or oil hardening, high-carbon tool and die steel for minimum distortion after hardening. It is used for blanking and forming dies, rolls, punches, and other such applications where a deep hardening, non-deforming steel with good resistance to wear is desired. (Also furnished in FM-Free Machining type.) This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-207. Producer or source: Teledyne Vasco.

SURF HARD is a nitriding alloy steel designed for those applications requiring exceptionally hard wear resistant surface and a tough core, such as heavy duty gears, spline shafts, rubber and paper mill rolls, cylinder liners, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-246. Producer or source: Atlas Alloys Division, Rio Algom Corporation.

REXALLOY 33 is a cast nonferrous cobalt-base alloy of chromium, tungsten and carbon which is recommended for cutting tools and wear-resistant parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: Co-6. Producer or source: Crucible Steel Company of America. Originally published October 1954, revised January 1962.

Kentanium K162B is a titanium carbide cermet having high heat and oxidation resistance along with high hardness and abrasion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as machining and joining. Filing Code: Ti-33. Producer or source: Kennametal Inc..

Colmonoy No. 6 is a high-carbon, nickel-base alloy recommended for hard facing parts to resist wear, corrosion, heat and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-78. Producer or source: Wall Colmonoy Corporation.

Wallex No. 6 is a cobalt-base alloy recommended for hard facing parts to resist impact, corrosion and oxidation at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, and deformation. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-36. Producer or source: Wall Colmonoy Corporation.

Vasco Hypercut is a super-hard high-speed steel that hardens to Rockwell C70 and is recommended for cutting tools for the toughest machining operations. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-158. Producer or source: Vanadium Alloys Steel Company.

ALMANITE WS is a martensitic iron with free carbon in the nodular form. It is recommended for service conditions involving high impact and abrasion. This datasheet provides information on composition, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-38. Producer or source: Meehanite Metal Corporation.

COLMONOY No. 8 is a nickel-chromium-boron alloy recommended for hard surfacing parts to resist abrasion, corrosion and oxidation. Its high chromium (nominally 26%) contributes resistance to high-temperature oxidation and promotes the formation of chromium carbides for greater abrasion resistance. It is supplied as atomized powder for application with Wall Colmonoy's SPRAYWELD and FUSEWELD processes. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: Ni-230. Producer or source: Wall Colmonoy Corporation.

WALLEX No. 40 is a self-fluxing, cobalt-base hard-surfacing alloy with excellent resistance to a combination of corrosion and abrasion and relatively good impact properties. It has excellent red hardness and weldability. It is supplied only as atomized powder for application with Wall Colmonoy's SPRAYWELD and FUSEWELD processes. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: Co-74. Producer or source: Wall Colmonoy Corporation.