Search Results for graphite

MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

ACO Eurobar EN-GJS-350-22C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%, and it is specifically designed to provide good impact properties at low temperature. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating. Filing Code: CI-101. Producer or source: ACO Eurobar GmbH.

ACO Eurobar EN-GJS-350-22C is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%. It is specifically designed for applications where tensile strength is less important than the impact and elongation properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-102. Producer or source: ACO Eurobar GmbH.

ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

TYPE CR MEEHANITE is an austenitic material especially designed to meet a wide variety of corrosion, wear and heat applications. Like other Meehanite materials it is produced under closely controlled procedures which result in desirable graphite form and distribution. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: CI-55. Producer or source: Meehanite Worldwide Corporation.

AVIMID N / GRAPHITE is a carbon-fiber/polyimide, high-temperature composite tooling material developed to fabricate quality parts from prepregs based on thermoplastics. This datasheet provides information on physical properties, and tensile properties as well as fracture toughness. It also includes information on high temperature performance. Filing Code: Cp-11. Producer or source: E. I. Dupont de Nemours & Company Inc..

AISI Type O6 is a free-machining, oil-hardening tool steel designed for cold-work dies. Because about one-third of its carbon is present as graphite, it has excellent machinability and exceptional resistance to galling and seizing. It is primarily used on drawing, forming and shaping operations where its self-lubricating quality is advantageous. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-287. Producer or source: Tool steel mills.

GRAPH-AL is a water or brine hardening graphitic steel used in applications which require shallow hardening properties and resistance to impact loading. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-68. Producer or source: Timken Roller Bearing Company.

OILGRAPH is an oil hardening, non-deforming graphitic steel recommended for tools and dies requiring good resistance to wear and abrasion. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: TS-78. Producer or source: Allegheny Ludlum Corporation.

CARILLOY 1% Cr-1/2% Mo is a low alloy oxidation, corrosion and graphitization resistant steel suitable for moderately high (900-1100 deg. F.) temperature use. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-89. Producer or source: United States Steel Corporation.

GRAPH-M.N.S. is an air or oil hardening steel containing free graphite. In the hardened condition it has high resistance to scuffing, galling and seizing. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming and heat treating. Filing Code: TS-13. Producer or source: Timken Roller Bearing Company.

GRAPH-TUNG is a water or brine hardening graphitic steel recommended for the most extreme abrasive applications. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-39. Producer or source: Timken Roller Bearing Company.

JESSOP TRUGLIDE is a free-machining, oil-hardening too steel designed primarily for cold-work die applications. Free graphite in this steel gives it excellent machinability and outstanding resistance to galling and seizing in operation. Among its many uses are dies, gages, punches, arbors and bushings. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-424. Producer or source: Jessop Steel Company.

AL TECH OILGRAPH is an oil-hardening, non-deforming graphitic tool steel. It has excellent machinability and outstanding resistance to wear and galling. Hardening is safe and easy. Typical applications are gages, cold-forming tools, punches, spindles and bushings. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-463. Producer or source: AL Tech Specialty Steel Corporation.

AISI Type A10 is a high-carbon graphitic tool steel capable of developing high hardness and wear resistance. It is recommended for shear blades, blanking and forming dies, drawing dies and wear plates. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-220. Producer or source: Timken Roller Bearing Company.

Bethlehem O-6 is a graphitic, oil-hardening tool steel recommended where optimum machinability is desired for forming, shaping and drawing tools and dies, and where its inherent self-lubricating effect is advantageous. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-161. Producer or source: Bethlehem Steel Corporation.

HALGRAPH is an electric furnace melted, oil hardening, graphitic tool steel with excellent non-deforming properties. It is free-machining and has a high resistance to wear. It is non-deforming type steel suitable for use as tools, dies, gauges and parts requiring maximum hardness and freedom from distortion. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-165. Producer or source: Crucible Steel Company of America.

K-KARB (Carbon-Carbon) is a graphitized structural graphite fabricated from a graphitized cloth precursor. The layers of graphitized cloth are laminated and bonded together with a graphitic matrix forming a light weight, high strength graphite. This datasheet provides information on physical properties, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as machining. Filing Code: Cp-2. Producer or source: Kaiser Aerotech.

CARPENTER O6 is an oil-hardening tool steel for cold-work applications. It is designed to have free graphite in the microstructure. This free graphite is responsible for the excellent machinability of this grade. Among the many applications of Carpenter O6 are dies for various uses, punches, gages, bushings, mandrels, pneumatic hammers, stamps, taps, rotary slitting cutters and wear plates. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-480. Producer or source: Carpenter.

Meehanite GB300 is a pearlitic gray cast iron that has a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. This grade exhibits high strength while still maintaining good thermal conductivity and good machinability. It is generally used for applications where the thermal conductivity requirements preclude the use of other higher-strength materials, such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fatigue. It also includes information on low and high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-75. Producer or source: Meehanite Metal Corporation.