Inconel alloy 050 is an improved corrosion-resistant alloy in tubular form for down hole service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Ni-629. Producer or source: Special Metals Corporation.

DELORO 15, 21, 22, and 25 are prealloyed, gas-atomized, nickel-base powders for repair of glass-forming molds. This datasheet provides information on composition, physical properties, and hardness. It also includes information on powder metal forms. Filing Code: Ni-689. Producer or source: Stellite Coatings.

Stoody AP stainless steel wires are all-position wires. The nickel in this product will achieve a good balance of austenite and ferrite in lean duplex stainless steels. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on forming and joining. Filing Code: SS-1118. Producer or source: Stoody Company.

Incoloy Alloy 945 is a nickel-base precipitation-strengthened alloy that provides 860 MPa (125 ksi) minimum yield strength and an excellent combination of ductility and impact strength. The nickel content is sufficient to provide protection against chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-666. Producer or source: Special Metals Corporation. Originally published December 2008, revised April 2014.

MEEHANITE GA is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on heat treating and machining. Filing Code: CI-5. Producer or source: Meehanite Metal Corporation.

ALLOY VMS-513 is a nickel-base alloy developed to meet the tough operating conditions of gasoline and diesel engines. It combines high-temperature strength with good resistance to corrosion and wear, plus good fatigue strength. It is used in valves for gasoline-fueled industrial engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance, corrosion and wear resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-213. Producer or source: Simonds Steel Division, Wallace-Murray Corporation.

AIRCO METAL-COR 6 is a continuous tubular steel welding electrode with a powdered-metal core; gas shielding rather than slag is used to protect the core. It eliminates 50 to 70% of the smoke and fumes generated by self-shielded flux-cored electrodes and about 30% of the smoke from gas-shielded flux-cored electrodes. Metal-Core 6 is used to deposit typically 1.6 to 1.8% manganese steel weld metal that provides as-deposited tensile strength in the range 85,000 to 92,000 psi, depending on composition of the shielding gas. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-381. Producer or source: Airco Welding Products.

Metrode 20.70 Nb is a nickel-base consumable with a nominal composition of Ni, 20% Cr, and 2.5% Nb. This alloy is used to join a variety of oxidation-resistant nickel alloys. The product is a solid wire for tungsten inert gas (TIG), metal inert gas (MIG), and submerged arc welding (SAW). This datasheet provides information on tensile properties as well as fracture toughness. It also includes information on joining. Filing Code: Ni-606. Producer or source: Metrode Products Ltd.

Inco-Weld C-276 (ERNiCrMo-4) is a NiCrMo filler metal with increased molybdenum, tungsten, and reduced niobium and is suited to both gas metal arc welding (GMAW) or gas tungsten arc welding (GTAW) processes, either manually or fully automated. The alloy offers strength levels consistently exceeding the minimum requirement of the 9% Ni steels, excellent Charpy impact toughness at −196 deg C (−321 deg F), and improved wire delivery to the weld pool resulting from controlled filler metal processing. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Ni-657. Producer or source: Special Metals Welding Products Company.

Inconel Filler Metal 72 is used for gas tungsten arc welding of Inconel alloy 671 (Alloy Digest Ni-180, October 1972) or Incoclad 671/800 tubing (Alloy Digest Ni-544, September 1998). The alloy is resistant to flue gas corrosion. This datasheet provides information on composition and tensile properties. It also includes information on forming and joining. Filing Code: Ni-660. Producer or source: Special Metals Welding Products Company.

VERTI-COR Welding Electrode is a continuous tubular steel welding electrode with a powdered-metal-and-flux core; gas shielding and slag are used to protect the molten electrode and weld metal. The VERTI-COR Welding Electrode is used for all-position welding and is a member of the FLUXCOR family of electrodes. It is used to deposit typically 1.6 to 1.9% manganese steel weld metal that is tough and has tensile strengths in the range 80,000 to 97,000 psi, depending on composition of the shielding gas. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-384. Producer or source: Airco Welding Products.

TRI-MARK TM-115 is a gas-shielded flux-cored welding electrode for continuous high deposition are welding. It is designed specifically for semiautomatic and automatic arc welding of high-strength low-alloy steels and quenched-and-tempered steels. This gas-sheilded tubular wire can be used for single and multiple-pass welding. It has outstanding low-temperature impact properties. Its applications including mining equipment, large vehicles and similar items. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-392. Producer or source: Tri-Mark Inc..

INCONEL Filler Metal 617 is a nickel-base alloy suitable for welding a number of alloys. It is used for the gas tungsten-arc (TIG) and gas metal-arc (MIG) welding of INCONEL alloy 617. For extended service at temperatures above 1700 F (925 C), it is recommended for welding INCOLOY alloy 800H and 802. It also is recommended for welding a number of cast alloys. This datasheet provides information on composition and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-302. Producer or source: Huntington Alloy Products Division, An INCO Company.

INCONEL Filler Metal 92 is a nickel-base alloy that is used for gas-tungsten-arc and gas-metal-arc welding of austenitic and ferritic steels and nickel alloys. Applications include (1) Joining INCONEL and INCOLOY alloys to stainless steels, carbon steels and MONEL alloys, (2) Joining MONEL alloys and Nickel 200 to stainless steels and (3) Joining stainless steels to carbon steels. This filler metal also is used for welding nickel steels. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-315. Producer or source: Huntington Alloy Products Division, An INCO Company.

MONEL Filler Metal 60 is a nickel-base alloy used for gas-tungsten-arc, gas-metal-arc and submerged-arc welding of MONEL. alloys 400, 400, R-405 and K-500. It also is used for surfacing of steel. The weld metal deposited by Filler Metal 60 has properties similar to those of MONEL. alloy 400. It has good strength and resists corrosion in many media. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-321. Producer or source: Huntington Alloys.

INCONEL Filler Metal 625 is used for gas-metal-arc and gas-tungsten-arc welding of INCONEL alloys 625 and 601 and INCOLOY alloy 800H. It is also used for surfacing of steel, for welding nickel steels, and for welding various corrosion-resistant alloys such as INCO Alloys G and 904L. It has high strength and exceptional resistance to corrosion. Filler metal 625 is useful for many dissimilar joints involving INCONEL and INCOLOY alloys, carbon steels, low-alloy steels and stainless steels. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-327. Producer or source: Inco Alloys International Inc..

INCONEL Filler Metal 601 is a nickel-base alloy that is used for gas-tungsten-arc welding of INCONEL alloy 601. It is the preferred welding product for all gas-tungsten-arc welding of alloy 601. This weld metal is comparable to the base metal (INCONEL alloy 601) in resistance to corrosion and oxidation. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-329. Producer or source: Inco Alloys International Inc..

INCONEL Filler Metal 62 is used for gas-tungsten-arc, gas-metal-arc and oxyacetylene welding of INCONEL alloy 600 in thicknesses up to 2 inch (50 mm). The weld metal is comparable to the base metal in high-temperature strength and oxidation resistance. For material over 2-inch (50-mm) thick, INCONEL Filler Metal 82 is recommended. This datasheet provides information on composition. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-331. Producer or source: Inco Alloys International Inc..

INCONEL Filler Metal 82 is used for gas-tungsten-arc, gas-metal-arc, and submerged-arc welding of INCONEL alloys 600, 601 and 690, INCOLOY alloys 800 and 800H, and INCO alloy 330. It also is used for surfacing of steel. Dissimilar-welding applications for which the filler metal is used include joining INCONEL alloys, INCOLOY alloys and alloy 330 to nickel, MONEL alloys, stainless steels and carbon steels. It also is used to join stainless steels to nickel alloys and carbon steels. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-342. Producer or source: Inco Alloys International Inc..

Rima 82 is an Inconel-type welding wire for tungsten inert gas (TIG), metal inert gas (MIG), and submerged arc (SAW) welding of nickelbase alloys and dissimilar joints between nickel alloys and ferritic and austenitic stainless steels. The alloy is also known generically as filler metal 82 (FM82). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: Ni-584. Producer or source: Metrode Products Ltd.