Nickel-Copper Alloys 505 and 506 are strong castings alloys. Both alloys combine high strength with good wear resistance. Alloy 505 (4% silicon) is employed where exceptional resistance to galling is needed. Alloy 506 (3% silicon) is recommended where good (but not exceptional) galling resistance is sufficient. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion and wear resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-215. Producer or source: Nickel alloy casting producers.

TRISTELLE ALLOY TS-1 is a 30Cr-10Ni-12Co alloy developed to withstand both corrosion and galling. This alloy relies on the formation of chromium-rich carbides during solidification. It is the lowest in carbon of the Tristelle Family. The alloy is recommended for valve services. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance as well as joining. Filing Code: SS-662. Producer or source: Stoody Deloro Stellite Inc.

Tristelle alloy TS-2 is an alloy of 35Cr-10Ni-12Co developed to withstand both corrosion and galling. This alloy relies on the formation of chromium-rich carbides during solidification. It is the intermediate carbon content alloy in this family, (See TS-1, Alloy Digest SS-662, December 1996, and TS-3, Alloy Digest SS-672, January 1997) and is recommended for valve service. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance as well as joining. Filing Code: SS-668. Producer or source: Stoody Deloro Stellite Inc.

Tristelle alloy TS-3 is an alloy of 35Cr-10Ni-12Co developed to withstand both corrosion and galling. This alloy relies on the formation of chromium-rich carbides during solidification. It is the highest carbon content alloy of the family of Tristelle alloys. (See TS-1, Alloy Digest SS-662, December 1996, and TS-2, Alloy Digest SS-668, January 1997). Alloy TS-3 is recommended for valve service. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion and wear resistance as well as joining. Filing Code: SS-672. Producer or source: Stoody Deloro Stellite Inc.

ARMCO NITRONIC 60 Stainless Steel provides outstanding galling and wear resistance. It also has excellent high-temperature oxidation resistance and low-temperature impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-308. Producer or source: Baltimore Specialty Steels Corporation. Originally published as Nitronic 60, March 1975, revised July 1990.

Gall-Tough Plus Stainless is a modification and improvement of Gall-Tough (Alloy Digest SS-510, November 1989). Gall-Tough Plus stainless is an austenitic stainless steel that possesses superior self-mated galling and metal-to-metal wear resistance. It is stronger and has better high-temperature oxidation resistance than AISI Type 304 stainless. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance, corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-986. Producer or source: Carpenter Specialty Alloys.

GALL-TOUGH Stainless is an austenitic stainless steel which possesses superior self-mated galling and metal-to-metal wear resistance. It is stronger and has better high-temperature oxidation resistance than AISI Type 304 stainless. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-510. Producer or source: Carpenter.

WAUKESHA ALLOY 54C is a nickel-base casting alloy having high resistance to corrosion, superior resistance to galling or seizing in metal-to-metal application, and good castability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as machining. Filing Code: Ni-426. Producer or source: Waukesha Foundry Company.

Uddeholm Vancron 40 offers an excellent combination of galling resistance and adhesive wear resistance, which should be used in cold-work applications where the predominant failure mechanisms are adhesive wear or galling. Typical applications include blanking and forming, cold extrusion, deep drawing, and powder pressing. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating, machining, surface treatment, and powder metal forms. Filing Code: TS-687. Producer or source: Böhler-Uddeholm North America.

Carlson alloy Nitronic 30 is a nitrogen-strengthened austenitic stainless steel providing aqueous corrosion resistance combined with resistance to abrasives and metal-to-metal wear. It has higher mechanical properties than standard austenitic grades and outstanding corrosive wear resistance under many different sliding conditions. Its galling resistance is equivalent to that of AISI Type 304. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-814. Producer or source: G.O. Carlson Inc.

Electralloy Nitronic 60 is an alloy with excellent uniform corrosion resistance, outstanding galling resistance, high strength, and good high-temperature oxidation resistance. The alloy retains toughness at low temperature. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-721. Producer or source: Electralloy, a G.O. Carlson Inc. Company.

Carlson alloy Nitronic 33 has twice the yield strength of 304 stainless with comparable corrosion resistance. The low magnetic permeability of the alloy is retained after severe cold working. The resistance to chloride stress-corrosion cracking is superior to Type 304. Nitronic 33 has excellent strength and ductility at cryogenic temperature, and wear and galling resistance is superior to the standard austenitic grades. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on low temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-931. Producer or source: G.O. Carlson Inc., Electralloy.

TECH-TRONIC 32 stainless steel is essentially a low-nickel chromium-manganese austenitic iron-base alloy. In the annealed condition it provides about twice the yield strength of AISI Type 304 stainless steel and almost the same resistance to corrosion. It also offers improved wear and galling resistance over standard stainless steels. TECH-TRONIC 32 can be cold worked to high strength levels with retention of good ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-348. Producer or source: Techalloy Company Inc..

Kaiser Aluminum alloy 4026 has high strength and good wear resistance, as well as galling resistance. It was developed for sliding friction resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: AL-385. Producer or source: Tennalum, A Division of Kaiser Aluminum.

Type CF10SMnN is a 17Cr-8.5Ni-8Mn-4Si cast alloy with excellent galling resistance, cavitation-erosion resistance, high mechanical properties, and good castability. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as casting and heat treating. Filing Code: SS-727. Producer or source: Various stainless steel casting companies.

Uddeholm Vancron SuperClean is a chromium-molybdenum-vanadium-nitrogen alloy cold-work tool steel that is produced by the powder metallurgy process. It offers an excellent combination of galling resistance and adhesive wear resistance, which makes the steel ideal for severe production conditions and/or long run production in applications where a surface coated tool steel is needed. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-824. Producer or source: Uddeholms AB.

ILLIUM B was developed as a bearing alloy for maximum wear and galling resistance in high concentrations of hot sulfuric acid. The alloy is capable of being age hardened. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-146. Producer or source: Stainless Foundry & Engineering Inc..

CARLSON ALLOY NITRONIC 60 is a galling- and wear-resistant austenitic stainless steel that provides a significantly lower-cost alternative to cobalt-bearing and high-nickel alloys. Corrosion resistance is superior to 304 in most media. Approximately twice the yield strength of 340 and 316. Possesses excellent high-temperature oxidation resistance and low-temperature impact resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion and wear resistance as well as forming. Filing Code: SS-1029. Producer or source: G.O. Carlson Inc.

NITRONIC 33 is characterized by (1) High yield strength, (2) Good resistance to stress-corrosion cracking, (3) Low magnetic permeability even after severe cold working, (4) Excellent strength and ductility at cryogenic temperatures, and (5) Good resistance to wear and galling; in fact, in these specific areas NITRONIC 33 is superior to AISI Type 304 stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-324. Producer or source: Armco Steel Corporation, Advanced Materials Division. See also Alloy Digest SS-1142, April 2013.

P530 is a fully austenitic Mn-Cr-N steel with less than 2% nickel. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. Filing Code: SS-1264. Producer or source: Schoeller-Bleckmann.