Search Results for frictional resistance

ULTEM 4001 is an unreinforced polyetherimide resin with an internal lubricant. It is wear resistant and it has a reduced coefficient of friction. See also ULTEM 4000 (Alloy Digest CP-21, March 1992) for reinforced resin properties. ULTEM 4001 is available in opaque colors only. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as casting and powder metal forms. Filing Code: P-33. Producer or source: G. E. Plastics.

ULTEM 4000 is a reinforced polyetherimide resin with an internal lubricant. It is wear resistant and has a reduced coefficient of friction. See also ULTEM 4001 for unreinforced resin properties (Filing code P-33, 3/92). This datasheet provides information on physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on wear resistance. Filing Code: Cp-21. Producer or source: G. E. Plastics.

Kaiser Aluminum alloy 4026 has high strength and good wear resistance, as well as galling resistance. It was developed for sliding friction resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: AL-385. Producer or source: Tennalum, A Division of Kaiser Aluminum.

FEDRATED NO. 3 is a tin-base bearing alloy recommended for moderate to high speeds and loads. It has low frictional resistance, low wear, good running-in properties, good emergency behavior upon failing of lubrication, and lower coefficient of expension than the lead-base alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and joining. Filing Code: Sn-2. Producer or source: Federated Metals Corporation, ASARCO Inc..

Austral Wright 5% Phosphor Bronze (UNS C51800) is a wrought copper-tin-phosphorus alloy. It is the most widely used grade of wrought phosphor bronze. It is harder, stronger and stiffer than the wrought brasses and, in strip and wire form, is produced with a combination of excellent cold formability, high strength and good corrosion resistance, which makes it ideal for use as springs. It also has a low coefficient of friction against steel. This makes it a popular choice for wear resistant guide strips and similar bearing applications involving boundary lubrication conditions. The alloy has adequate electrical and thermal properties, which helps it find applications in current-carrying and heat transfer applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: Cu-929. Producer or source: Austral Wright Metals.

ToughMet 2 CX is a Cu-9Ni-6Sn alloy that combines low coefficient of friction with wear resistance. ToughMet alloys are a line of spinodal hardened Cu-Ni antigalling alloys for bearings capable of performing with a variety of shafting materials and lubricants. The alloys combine a high lubricity with wear resistance in these severe loading conditions. ToughMet 2CX in the cast and spinodally hardened (CX) condition exhibits tensile strength in excess of 724 MPa (105 ksi) and hardness exceeding HRC 27 with excellent machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Cu-819. Producer or source: Materion Brush Performance Alloys.

MICROZINC Alloy 100 is a zinc-lead-cadmium alloy having good ductility with adequate strength, good resistance to corrosion, and a low coefficient of sliding friction. It is solderable and non-magnetic. Processing differences give three commercial products or classes designated= 101, 102 and 103. This alloy does not stain other materials. Its many uses include jewelry, coins and battery cans. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-27. Producer or source: Ball Corporation, Metal and Chemical Division.

METCO 505 is a high-molybdenum powder designed to produce plasma flame spray coatings for use as hard bearing surfaces with low coefficient of friction and for resisting wear by abrasive grains or hard surfaces. Its coatings have excellent non-scuffing properties and are compatible with many mating materials, particularly cast iron and iron-base alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as surface treatment. Filing Code: Mo-12. Producer or source: Metco Inc..

MICROZINC Alloy 190 is a zinc-copper alloy with good atmospheric corrosion resistance and a low coefficient of sliding friction to eliminate galling in service. It has maximum strength commensurate with good ductility and drawability. Processing differences give two commercial products or classes designated 191 and 192. This alloy does not stain other materials. Its many uses include terrazzo strips, eyelets and weatherstrips. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-29. Producer or source: Ball Corporation, Metal and Chemical Division.

BELMONT ALLOY 18910 is a general-purpose aluminum casting alloy containing 2.5% silicon which contributes to good casting characteristics for intricate shapes. Sand and permanent-mold castings comprise its main use. It is used widely for bearings and components of intricate shape. Because of its anti-scuffing properties, low friction and high resistance to wear under conditions of boundary and thin-film lubrication, it is used extensively for large rolling mill bearings. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-229. Producer or source: Belmont Metals Inc..

BUNTING Alloy 937 is a cast bushing and bearing bronze. It is one of the most satisfactory materials to use where shaft alignments or shaft wear is a problem. It has a good load capacity and excellent anti-friction characteristics. Its many uses include pressure-tight castings, corrosion-resistant applications, bearings and pumps. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-373. Producer or source: NL Industries Inc., Bearing Division.

ANACONDA Alloy (A) 510 is the most widely used of the phosphor bronzes, and is noteworthy among the copper alloys for its resilience and fatigue strength. It is well adapted to all forms of cold work, is rugged and durable in severe service and provides an excellent bearing surface that limits friction and resists wear. Among its many applications are chemical hardware, bearings and springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-377. Producer or source: Anaconda American Brass Company.

ALUMINUM A850.0 is an aluminum bearing alloy containing nominally 2.5% silicon for improved casting characteristics. It is used extensively in the T5 temper for heavy-duty applications, such as large rolling-mill bearings. It is particularly suitable for this application because of its anti-scuffing characteristics, low friction and high resistance to wear under conditions of boundary and thin-film lubrication. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-240. Producer or source: Various aluminum companies.

ALUMINUM 392.0 is a hypereutectic aluminum-silicon alloy developed for die castings which require high resistance to wear and abrasion. Applications include variable speed pulleys, automotive clutch friction rings, cylinder liners, sheaves, and brake drums. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-199. Producer or source: Aluminum Company of America.

CDA ALLOY 544 is a leaded phosphor bronze with good resistance to corrosion and good machinability. It has strength equivalent to mild steel, good bearing and friction characteristics, good electrical conductivity, and is nonmagnetic. It is used for bearings, cams, gears, valves, meter and camera parts, screw machine products, and electrical parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-223. Producer or source: Anaconda American Brass Company.

Revere Alloy 411 is a bearing bronze alloy having good formability, low coefficient of friction, corrosion resistance, and freedom from stress-cracking. (It was formerly known as Revere No. 325.) This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-149. Producer or source: Revere Copper and Brass Inc..

Colmonoy 98 is a nickel-base alloy with high corrosion resistance, particularly to sodium hydroxide, salt water, and sulfuric acid. It also has a low coefficient to friction to reduce metal-to-metal adhesive wear loss. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on corrosion and wear resistance as well as machining, joining, and powder metal forms. Filing Code: Ni-545. Producer or source: Wall Colmonoy Corporation.

Tin Babbit comprises a family of essentially tin-antimony-copper alloys used to minimize friction in moving parts of machines. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Sn-3. Producer or source: White metal bearing alloy producers.

Lead Babbit comprises a family of alloys used to cut down on friction in moving parts of machines. Alloys 7, 8 and 13 are essentially lead-antimony-tin alloys. Alloy 15 is an arsenical (about 1% arsenic) lead-base alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, and machining. Filing Code: Pb-10. Producer or source: White metal bearing alloy producers.

BUNTING Alloy 72 is a cast bushing and bearing bronze with excellent load capacity and anti-friction qualities. It is used in a wide variety of industrial and automotive equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-269. Producer or source: Bunting Brass & Bronze Company.