Search Results for flux workability

ZILLOY 40 is a sheet and strip zinc-base alloy recommended for drawn or mildly formed parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, and heat treating. Filing Code: Zn-5. Producer or source: New Jersey Zinc Company.

Zilloy 15 is a zinc-base alloy strip recommended for drawn or mildly formed parts requiring maximum stiffness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, and joining. Filing Code: Zn-6. Producer or source: New Jersey Zinc Company.

HAYNES Alloy No. 273 is a nickel-base, hard-facing alloy developed to provide extra life for hot-working equipment such as hot-forging dies, hot-shear blades and hot-extrusion dies. It is deposited by using a composite electrode with nickel-base core and the balance of the alloying elements in the flux coating. Deposits retain their hardness up to 1200 F. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-208. Producer or source: Cabot Corporation.

MAGNESIL-N is a non-oriented silicon-iron alloy of exceptional magnetic qualities designed for applications involving frequencies of 400 Hertz and higher. It has good permeability in all directions of the rolling plane, and is designed for either punched or sheared laminations with random flux disposition. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming and heat treating. Filing Code: Fe-53. Producer or source: Spang Industries Inc..

MAGNESIL-O is an oriented silicon-iron alloy of exceptional magnetic qualities designed for applications involving frequencies of 400 Hertz and higher. It has pronounced directional magnetic properties in the direction of rolling. It is recommended for wound cores and stacked laminations which are sheared so that the magnetic flux is mainly in the direction of the strip length. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming and heat treating. Filing Code: Fe-54. Producer or source: Spang Industries Inc..

AMBRALOY-901 is a 95-5 copper-aluminum alloy having high strength, hardness, and excellent resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-73. Producer or source: American Brass Company.

REPUBLIC 100-AR was developed to provide a minimum yield strength of 100,000 psi in the as-rolled condition. It also has exceptional wear resistance, good toughness and design flexibility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-307. Producer or source: Republic Steel Corporation.

Aluminum 7076 is an ultra-strength aluminum forging alloy exhibiting exceptional mechanical properties, workability, and response to age-hardening heat treatment. It is suitable for highly stressed structural parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-143. Producer or source: Aluminum Company of America.

MAGNESIUM ALLOY-TA54A is a general purpose hammer-forging alloy having intermediate strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-44. Producer or source: Aluminum Company of America.

Hiperco 27 is an iron-cobalt type of soft magnetic material recommended for use in motors, generators, transformers and relays and at temperatures above 950 F. It is used for high flux levels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Fe-26. Producer or source: Westinghouse Electric Corporation.

CARPENTER Consumet Electrical Iron is a double-melted low-carbon iron recommended for fabricating or machining of thin-wall parts that must be vacuum tight. Melting and manufacture are controlled closely to provide freedom from porosity and internal defects. This iron is recommended for components for certain vacuum or gas-filled electronic tubes that need the capacity to carry magnetic lines of force. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: Fe-61. Producer or source: Carpenter.

Tantung 144 is a cast nonferrous alloy recommended for cutting tools where resistance to abrasion is paramount and where there is little or no shock or impact. This datasheet provides information on composition, physical properties, and hardness as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-34. Producer or source: Vascoloy, Ramet Division.

USS T-1 Type B is one of a family of quenched-and-tempered alloy steels with high yield strengths, good weldability and good toughness down to 50 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-273. Producer or source: United States Steel Corporation.

Abracorr 30 was developed to solve severe abrasion in wet environments. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-684. Producer or source: Abraservice UK.

MAGNESIUM AZ61A is a magnesium extrusion alloy having a strength level between that of AZ31B and ZK60A. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-43. Producer or source: The Dow Chemical Company.

Covandur is a free-machining iron-cobalt-vanadium alloy designed for use in electrical equipment in which high magnetic permeability at very high flux densities is essential. This datasheet provides information on composition and physical properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-52. Producer or source: Carpenter.

Tophet-C is a nickel-base alloy recommended for electrical appliances and other devices whose operating temperatures do not exceed 1850 F. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Ni-106. Producer or source: Wilbur B. Driver Company.

HYPERNOM alloy is a high-permeability, low-hysteresis nickel-base alloy which is provided with the correct temper for sheet metal cold formability for shielding components. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: Ni-385. Producer or source: Carpenter Technology Corporation.

USS BEN-WELD is an alloy steel that fills the designer's need for large-diameter, ductile reinforcing bars with specified minimum mechanical properties. Compared to many other steels for reinforcing bars, USS BEN-WELD provides simplified, lower cost welding and more compact designs through more acute bending. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-295. Producer or source: United States Steel Corporation.

KYNAI C69 is an age-hardenable aluminum alloy recommended for medium and high strength appIications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-87. Producer or source: Imperial Chemical Industries Inc..