Search Results for farm machinery

CENTRI-CAST GRAY IRON 55 is a centrifugally cast gray iron with a nominal tensile strength of 55,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are seals, bushings, farm machinery, casings and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-48. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 50 is a centrifugally cast gray iron with a nominal tensile strength of 50,000 psi. It is cast in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Among its many applications are farm machinery, seals, bushings, machine tools and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-51. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 45 has a nominal tensile strength of 45,000 psi. It is gray iron cast centrifugally in the form of tubing which has a wide range of uses for applications where freedom form pattern cost is an important consideration and where size and shape are of paramount importance. Its many applications include automotive equipment, farm machinery, bushings and machine tools. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-50. Producer or source: Federal Bronze Products Inc..

AISI 5117 is a low-carbon, low-chromium steel for carburizing and other uses. It is recommended for carburizing applications where it is sufficient to have a low-hardenability core of medium strength and toughness combined with a hard, wear-resistant carburized case. It is used without carburizing in the as-rolled, annealed, normalized or quenched-and-tempered condition. It is suitable for use in the automotive, farm-machinery and many other industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-376. Producer or source: Alloy steel mills and foundries.

AISI 1548 is a medium-carbon steel with a relatively high manganese content (1.10-1.40%). It can be used in a wide range of applications in the hot-rolled, normalized, annealed, cold-worked or liquid-quenched-and-tempered condition. It combines good machinability, with good workability. Among its many uses are automotive parts, farm machinery, shafts, hand tools and springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-89. Producer or source: Carbon steel mills.

AISI 3150 is a medium carbon, chromium-nickel alloy steel having great depth hardness, high elastic properties and excellent fatigue resistance and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: SA-143. Producer or source: Alloy steel mills and foundries.

AISI 5147 is a low-chromium (nominally 1% chromium), intermediate-hardenability alloy steel for medium-duty applications. It is normally hardened by quenching in oil. It has a wide range of applications for transportation equipment, farm implements, tools and industrial machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-334. Producer or source: Alloy steel mills and foundries.

CENTRI-CAST GRAY IRON 40 is a centrifugally cast gray iron with a nominal tensile strength of 40,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are automotive equipment, compressors, machine tools and general machinery applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-44. Producer or source: Federal Bronze Products Inc..

UNS G50460 is an alloy steel of fairly low hardenability. It is used in a number of machinery and engineering applications where its relatively low hardenability and moderate strength are satisfactory. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-452. Producer or source: Alloy steel mills and foundries.

AISI 1551 is a medium-carbon steel containing relatively high manganese (0.85-1.15%) for a carbon steel. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. It has a combination of good machinability and good workability. Its many uses include hand tools, machinery parts, springs and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-80. Producer or source: Carbon steel mills.

AISI 5132 is a medium-hardenability, through-hardening steel of low (0.75-1.00%) chromium content. It is recommended for uses where moderate strength and toughness are satisfactory. It may be used in the unhardened condition or after quenching in water or oil followed by tempering to the desired strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-350. Producer or source: Alloy steel mills and foundries.

NI-ROD FC 55 cored wire is used for flux-cored-arc and submerged-arc welding of gray, malleable, and ductile cast irons. It is also used for surfacing of cast irons and for joining cast irons to various wrought materials such as carbon steels and low-alloy steels. The cored wire combines the desirable features of NI-ROD 55 Welding Electrode with the speed and economy of automatic or semiautomatic welding. Submerged-arc welding with the cored wire is done with INCOFLUX 5 submerged arc flux. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on joining. Filing Code: Ni-538. Producer or source: Inco Alloys International Inc.

UNS No. H51321 is a medium-hardenability, through-hardening steel of low (0.75-1.00%) chromium content. It is recommended for uses where moderate strength and toughness are satisfactory. It may be used in the unhardened condition or after quenching in water or oil followed by tempering to the desired strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-416. Producer or source: Alloy steel mills and foundries.

AISI 5130 is a low-chromium through-hardening steel for applications where medium hardenability, strength and toughness are sufficient. It may be used in the unhardened condition or after quenching in oil or water followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-300. Producer or source: Alloy steel mills and foundries.

AWHF STEEL is a high-formability steel produced regularly at minimum yield strengths of 45,000 and 50,000 psi and for special applications at 55,000 and 60,000 psi. It is recommended for difficult cold-forming applications that involve bending or drawing and it has good weldability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-275. Producer or source: Alan Wood Steel Company.

MAXI-FORM 50 is a high-strength low-alloy steel developed for applications involving severe bending or moderate draw forming with exceptional freedom from rupture and edge cracking. It is supplied in the 50,000 psi yield-strength range, and also has good weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-282. Producer or source: Republic Steel Corporation.

SAE 1345 is a through-hardening, manganese alloy steel with intermediate hardenability. It is most commonly used where good strength is needed but low-to-medium toughness is sufficient. Its wide range of uses in tools and machinery includes hand tools, gears, shafts, bolts and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-425. Producer or source: Alloy steel mills and foundries.

AISI 1335 is a low-alloy through-hardening steel of moderate hardenability. It is used where medium strength and low-to-medium toughness meet the requirements of the application. It may be used in the unhardened condition or after quenching and tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-330. Producer or source: Alloy steel mills and foundries.

UNS H-86170 is a low-carbon nickel-chromium-molybdenum carburizing steel of good hardenability. Its core is characterized by good strength and toughness. It is recommended for heavy-duty applications such as cams, chains, fasteners, gears, shafts and piston pins. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-435. Producer or source: Alloy steel mills and foundries.

AISI 1330 is a through-hardening low-alloy steel for applications where medium hardenability and strength with low to medium toughness are sufficient. It may be used in the unhardened condition or after quenching in oil or water followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-303. Producer or source: Alloy steel mills and foundries.