1-20 of 374 Search Results for

extruded product

Sort by
Journal Articles
Alloy Digest (2011) 60 (3): Al-436.
Published: 01 March 2011
... Kaiser Alloy 6063 is a magnesium/silicon alloy. One of the most popular of the heat treatable alloy group. Products include extruded and drawn tube, pipe, rod, bar, and profiles. This alloy has good corrosion resistance, good weldability, and a good anodizing response. This datasheet provides...
Journal Articles
Alloy Digest (2005) 54 (9): Al-397.
Published: 01 September 2005
... Alloy 7055 extruded products in the T74511 and T76511 tempers have a combination of high strength, excellent corrosion resistance, toughness, fatigue, and formability. The alloy was developed as an advance over aluminum alloys 7178 and 7075. This datasheet provides information on composition...
Journal Articles
Alloy Digest (2002) 51 (3): Cu-678.
Published: 01 March 2002
... Wieland-N37 is a leaded nickel silver with excellent machining properties. It is available either as an extruded or drawn product. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat...
Journal Articles
Alloy Digest (1971) 20 (12): Pb-9.
Published: 01 December 1971
... cycles), psi 1200 1500 1500 1750 1800 Creep strength (l%/iOOOO hr at 86OF), psi 250 250 400 400 400 Table 2 - TYPICAL MECHANICAL PROPERTIES OF EXTRUDED PRODUCTS 1Sb 4Sb 6Sb 8Sb Tensile strength, psi 2900 3100 3300 3300 Elongation (2 in % 58 58 65 75 Brinell hardness 5 9 11 1 Fatigue strength (2 x 107...
Journal Articles
Alloy Digest (1985) 34 (7): Ni-317.
Published: 01 July 1985
... temperatures. It can be hot upset, forged, deep drawn, impact extruded and welded. Applications include highly corrosive environments in agrichemical, petrochemical, pulp and paper, oil and gas, marine and other chemical process industries. This datasheet provides information on composition, physical...
Journal Articles
Alloy Digest (2005) 54 (4): Al-392.
Published: 01 April 2005
... Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high-quality surface finish. Alloy 6063 is used in a variety of architectural applications. This datasheet provides information on composition, physical properties, hardness, tensile properties...
Journal Articles
Alloy Digest (1966) 15 (6): Mg-60.
Published: 01 June 1966
... Magnesium ZK21A is a non-hardenable extruded magnesium-base alloy having moderate strength and good weldability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive strength. It also includes information on forming, heat treating...
Journal Articles
Alloy Digest (2018) 67 (7): Cu-876.
Published: 01 July 2018
... Wieland-K14 is a machinable high-copper alloy available as extruded and drawn products. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining...
Journal Articles
Alloy Digest (2015) 64 (9): Cu-841.
Published: 01 September 2015
... Wieland-SW1 is a lead-free special brass made in extruded and drawn products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat...
Journal Articles
Alloy Digest (2005) 54 (8): Al-396.
Published: 01 August 2005
... A96101 General Characteristics: Alloy 6101 is prominent in the line of bus conductor extruded products. As a heat treatable wrought alloy, it is best suited for applications involving moderate strength and maximum electrical conductivity. It is similar to alloy 6063, but with minor chemistry changes...
Journal Articles
Alloy Digest (1998) 47 (9): Ni-544.
Published: 01 September 1998
... shown that higher chromium content alloys offer the best resis- tance to this type of corrosion, with a 50150 CrMi composition offer- ing the optimum performance. See Fig. 1. MCOCLAD 671/8OOHT is a co-extruded product upgraded with the higher strength Incoloy alloy SOOHT. The product combines the high...
Journal Articles
Alloy Digest (1989) 38 (5): Al-296.
Published: 01 May 1989
.... Workability: Fabrication of IncoMAP alloy Al-9052 at the mill involves vacuum pressing of powders to 11 or 18.5 in. diameter billets which are then extruded prior to further processing. The extruded product may be readily worked by conven- tional means to the desired final form. Joining: The alloy may...
Journal Articles
Alloy Digest (2016) 65 (8): Al-444.
Published: 01 August 2016
... to achieve both high strength and corrosion performance. Specification Equivalents: For extruded products: AMS 4157 AMS 4159 General Characteristics: Engineered to provide an optimum combination of high strength, corrosion performance, and high toughness. Table 1 Typical properties Thickness, mm...
Journal Articles
Alloy Digest (1981) 30 (5): Al-189.
Published: 01 May 1981
... excellent resistance to general corrosion and to stress-corrosion cracking. Aluminum 6463 provides excellent brightness on extruded products. Also, it can be heat treated successfully after anodizing. Forms Available: Extrusions in the form of wire, rod, bar, shapes and tubes. Applications: Extruded...
Journal Articles
Alloy Digest (2016) 65 (7): Al-443.
Published: 01 July 2016
... 44073-0002 :: 440.338.5151 :: Fax 440.338.8542 :: www.asminternational.org :: MemberServiceCenter@asminternational.org Published by ASM International® :: Data shown are typical, not to be used for specification or final design. Mechanical Properties: See Table 1. Specification Equivalents: For extruded...
Journal Articles
Alloy Digest (1999) 48 (12): Al-365.
Published: 01 December 1999
... temper. Contact the producer for more exact heat treat- ment temperatures. Specification Equivalents: UNS A97049 AMS 4157, 4159 for extruded products General Characteristics: Kaiser Aluminum Alloy 7049 is a heat treatable wrought alu- minum alloy with very high tensile strength and good machinability...
Journal Articles
Alloy Digest (2000) 49 (2): Al-367.
Published: 01 February 2000
... compared to the changes occurring at the temperatures employed to produce the T6 temper. Contact the producer for more exact heat treat- ment temperatures. Specification Equivalents: UNS A97149 AMS 4157, 4159 for extruded products General Characteristics: Kaiser Aluminum alloy 7149 is a heat treatable...
Journal Articles
Alloy Digest (1999) 48 (2): Al-358.
Published: 01 February 1999
... treatment or after cooling from an elevated-tempera- ture shaping process. No straightening takes place after stretch- ing. T511 applies to extruded products and to drawn tube when stress relieved by stretching 1 3% permanent set. Stretching is per- formed after solution heat treatment or after cooling from...
Journal Articles
Alloy Digest (2015) 64 (10): Mg-81.
Published: 01 October 2015
... Transverse 230 (33) 340 (49) 1 Machined billet/slab 200 (29) 300 (44) 1 Extruded bar TSA 260 (38) 410 (59) 9 DOI: 10.31399/asm.ad.mg0081 Product Forms Available: Extrusions. Extruded Elektron 675 is available as: round bar up to 120 mm (4.7 in.) diameter and section up to 200 × 50 mm (7.9 × 2.0 in It can...
Journal Articles
Alloy Digest (1953) 2 (2): Al-5.
Published: 01 February 1953
... (* Extruded products will have 75s-T6 clad 75S.O Clad 75ST6 82000 :iiE 76000 *72000 67000 11 17 11 4Goo 22000 - 46i-w 24000 - 150 - - strengths 8 to 10% higher) DOI: 10.31399/asm.ad.al0005 Copyright © ASM International® 1996 LOW TEMPERATURE PROPERTIES T=Pp= q. of Room Temp. Tensile Stceagtb % of Room Temp...