Search Results for evaporators

Copper Alloy No. C60800 is a medium-strength aluminum bronze containing nominally 95% copper and 5% aluminum. It has good resistance to atmospheric corrosion and its resists attack by nonoxidizing mineral acids such as sulfuric, hydrochloric and phosphoric. It is used widely for tubing in such equipment as condensers, evaporators and heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-443. Producer or source: Copper and copper alloy mills.

RA 400 is a ductile nickel-copper alloy that is characterized by resistance to a wide range of corrosive environments, freedom from stress-corrosion cracking, and good strength and toughness over a wide temperature range. This alloy is often chosen to handle sulfuric acid under reducing conditions. Its uses include marine components, caustic evaporators and chemical processing equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-284. Producer or source: Rolled Alloys Inc..

SANDVIK Sanicro 28 is an all-purpose low-carbon stainless steel alloy for service in highly corrosive environments. It has exceptionally high resistance to various types of corrosive attack and has good weldability. Among its numerous applications are evaporator tubes in the production of phosphoric acid; down-hole tubulars in deep, sour gas wells; piping and heat-exchanger tubes in sulfuric acid service and seawater cooled heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-442. Producer or source: Sandvik. See also Alloy Digest SS-831, September 2001.

MUELLER Alloy 4430 is a copper-zinc-tin alloy. It contains a small addition (nominally 0.06%) of arsenic as inhibiting element to protect the alloy against stress corrosion. It is commonly known as Admiralty Metal. It has a good combination of strength and ductility and good resistance to corrosion. It is used widely for condenser, evaporator and heat-exchanger tubes and associated applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-497. Producer or source: Mueller Brass Company.

MUELLER Alloy 7060 is a copper-nickel-iron alloy. It has good strength at moderately elevated temperatures and can be fabricated by both hot and cold-working procedures. It contains nominally 11/4 iron to increase its resistance to corrosion and erosion. It has good resistance to corrosion by salt water and is used in marine service. It is used widely for condenser tubes, distiller tubes, heat exchangers, evaporators and water heaters for domestic service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-501. Producer or source: Mueller Brass Company.

COPPER ALLOY NOS. C44400 and C44500 are copper-zinc-tin alloys inhibited by antimony and phosphorus, respectively. They are commonly known as inhibited admiralty metal or admiralty brass. They have a good combination of strength and ductility and good resistance to general corrosion. The small addition of inhibitor is made to minimize the alloy’s susceptibility to dezincification and stress corrosion. They are used for condenser, evaporator and heat-exchanger tubes and associated applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-599. Producer or source: Copper and copper alloy mills.

3M TITANIUM MATRIX COMPOSITES are produced by electron-beam evaporation to apply Ti-6Al-4V coating to high-strength, high-modulus silicon carbon fibers. The resulting composite has increased strength and stiffness over monolithic titanium/titanium alloy parts. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on surface treatment. Filing Code: TI-111. Producer or source: 3M Metal Matrix Composites Program.

Copper Alloy No. C44300 is a copper-zinc-tin alloy inhibited by arsenic; it is commonly known as inhibited admiralty metal or admiralty brass. It has a good combination of strength and ductility and good resistance to general corrosion. The small addition of arsenic (nominally 0.06%) is made to minimize the alloy's susceptibility to dezincification and stress corrosion. It is used widely for condenser, evaporator and heat-exchanger tubes and associated applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-526. Producer or source: Copper and copper alloy mills.

NICLOY 5 is a low carbon, nickel ferritic steel reecommended for low temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-96. Producer or source: Babcock & Wilcox Company.

Iridium is used for alloying with precious metals primarily to increase their strength, hardness and corrosion resistance. Of the many alloy combinations, the most popular and widely used are those containing platinum and iridium, in particular those alloys containing up to 30% iridium. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming. Filing Code: PT-5. Producer or source: Engelhard Corporation.

CUPRO NICKEL, 10%-755 is a highly ductile, malleable and corrosion resisting alloy, suitable for condenser tubes and many other engineering applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-77. Producer or source: American Brass Company.

MUELLER Copper 1220 is a deoxidized copper with high residual phosphorus (nominally 0.02%). It has rather low electrical conductivity but it is not susceptible to embrittlement by hydrogen. Its low electrical conductivity is mainly caused by the phosphorus. It has excellent cold-working characteristics and can be joined by several methods. Among its many applications are air conditioners, gas lines, heater lines, oil-burner and plumbing tubes, dairy tubes and oil lines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-495. Producer or source: Mueller Brass Company.

CARPENTER 20Mo-6 is an austenitic stainless steel which is resistant to corrosion in hot chloride environments with low pH. It has good resistance to pitting and stress-corrosion cracking in chloride environments and is also resistant to oxidizing media. Its good resistance to corrosion has been demonstrated in both laboratory and field tests. These tests indicate that potential applications for Carpenter 20Mo-6 include environments where HASTELLOY Alloy G (Cabot Corporation) is acceptable. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-444. Producer or source: Carpenter.

COPPER No. 122 is a deoxidized copper with high residual phosphorus. It is not susceptible to hydrogen embrittlement but has rather low electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-253. Producer or source: Copper and copper alloy mills.

Copper No. 142 is an arsenical copper deoxidized with phosphorus. Its capacity is excellent for hot forming or cold working and it has excellent joinability characteristics for soldering, brazing and gas-shielded arc welding. Its leading use is tubing for condensers and heat exchangers. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-284. Producer or source: Copper and copper alloy mills.

Carlson alloy C825 is a wrought nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. It was developed to handle both reducing and oxidizing media. The alloy is resistant to chloride-ion stress-corrosion cracking, to pitting and crevice attack and many corrosive solutions. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-419. Producer or source: G.O. Carlson Inc..

VDM 825 (Nicrofer 4221) is a titanium-stabilized fully austenitic Ni-Fe-Cr-Mo-Cu alloy that is designed for use in extremely corrosive environments. It is approved for pressure vessels with wall temperatures up to 450 °C (842 °F) according to VdTÜV and 538 °C (1000 °F) for Section VIII Division 1 vessels according to ASME. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on low and high temperature performance, corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-764. Producer or source: VDM Metals GmbH.

ANACONDA Alloy 706 (also known as Cupro Nickel, 10% 706) is a wrought 90% copper-10% nickel alloy developed to provide a material less costly than the copper-nickel alloys containing 20 or 30% nickel, but yet offering much of their excellent reliability. This was achieved by adding 1.25% iron to Alloy 706 to increase its resistance to corrosion by salt water. Alloy 706 is recommended where good mechanical properties, weldability and corrosion resistance are needed. It is widely used for plates, tubing and piping that must resist seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-391. Producer or source: Anaconda American Brass Company.

Waukesha Metal No. 3 is a high strength copper-nickel casting alloy having high corrosion resistance along with good ductility. It is recommended for conveyor chain links, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, joining, and surface treatment. Filing Code: Cu-203. Producer or source: Waukesha Foundry Company.

HASTELLOY ALLOY-D is a cast alloy composed primarily of nickel and silicon, and is exceptionally resistant to sulfuric acid of all concentrations even up to the boiling point. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-29. Producer or source: Haynes Stellite Company.