Search Results for engine valve applications

NCF 3015 alloy is an iron nickel alloy that is precipitation hardened and has good strength and corrosion resistance to 760 C (1400 F). It is commonly used for engine valve applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on forming, heat treating, and machining. Filing Code: SS-765. Producer or source: Carpenter.

Carpenter 21-55N Valve Steel is an austenitic nitrogen-bearing chromium-nickel-manganese alloy which offers an excellent combination of high temperature strength and corrosion resistance for exhaust valve applications. It is widely used as the head material in two-piece valves for internal combustion engines. It is also finding increasing use for one-piece valves in automobile engines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-176. Producer or source: Carpenter.

Carpenter SIL No. 1 is a hardenable silicon-chromium alloy steel that is used in applications where the operating temperatures are below 1000 F. It is widely used for intake valves and for exhaust valve stems in internal combustion engines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-152. Producer or source: Carpenter.

CARPENTER 21-12 is an austenitic chromium-nickel stainless steel which offers an excellent combination of high-temperature strength and corrosion resistance for exhaust valve applications. It is used widely as the head material in two-piece valves for both diesel and gasoline engines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-310. Producer or source: Carpenter Technology Corporation.

AISI No. 616 is a hardenable martensitic type stainless steel recommended for high temperature applications up to 1200 F. It is used for steam turbine blades and buckets, valves, jet engine components, and high temperature bolting. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-200. Producer or source: Alloy steel mills and foundries.

ATLANTIC 31 alloy is a cast high-strength manganese bronze with good resistance to corrision and good wear resistance under heavy or shock loads. Its anti-galling characteristics make it an excellent slow-speed, heavy load-bearing material for service against steel. Its applications include valve stems, gears, shafts and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-300. Producer or source: Atlantic Casting and Engineering Corporation.

SAE 4145 is a through-hardening, medium-carbon chromium-molybdenum alloy steel of high hardenability. It is recommended for heavy-duty service and is suitable for a wide variety of engineering uses. Its many applications include gears, axles, flanges, machine tool parts, nitrided parts, bolts, connecting rods, sprockets and valve seats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-420. Producer or source: Alloy steel mills and foundries.

CARPENTER 21-12N is an austenitic chromium-nickel stainless steel for valves. It offers excellent high-temperature strength and hardness as well as corrosion resistance to combustion products. This alloy contains 0.15-0.25% nitrogen for increased high-temperature strength. It is widely used as the head material in two piece exhaust valves for both diesel and gasoline engines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-316. Producer or source: Carpenter.

CARPENTER AMS 5700 is an austenitic chromium-nickel-tungsten valve steel which offers good high-temperature properties and resistance to corrosion in exhaust valves. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-313. Producer or source: Carpenter Technology Corporation.

INCONEL alloy 751 is a high-strength, high-temperature nickel-chromium alloy. It is essentially the same as INCONEL alloy X-750, except that its slightly modified composition imparts increased rupture properties at 1600 F. It is used for diesel engine exhaust valves. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as creep and fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-116. Producer or source: Huntington Alloy Products Division, An INCO Company.

ALLOY VMS-513 is a nickel-base alloy developed to meet the tough operating conditions of gasoline and diesel engines. It combines high-temperature strength with good resistance to corrosion and wear, plus good fatigue strength. It is used in valves for gasoline-fueled industrial engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance, corrosion and wear resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-213. Producer or source: Simonds Steel Division, Wallace-Murray Corporation.

PYROMET 31 is a nickel-base superalloy that exhibits an unusual combination of corrosion resistance and strength to temperatures as high as 1500 F (816 C). It has excellent resistance to hot sulfidation attack such as could occur in truck and locomotive diesel valve service. This datasheet provides information on composition, physical properties, and elasticity. Filing Code: Ni-252. Producer or source: Carpenter Technology Corporation.

INCONEL Alloy 721 is a high-strength, high-temperature nickel-base alloy responding to age hardening for maximum properties. It is highly resistant to chemical corrosion and oxidation. Its creep rate is low under high stresses at 1200-1500 F. It is recommended for use as valves in internal combustion engines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-80. Producer or source: Huntington Alloy Products Division, An INCO Company.

CARPENTER C-XB is a hardenable high-carbon high-silicon high-chromium stainless steel offering good high-temperature strength and corrosion resistance to combustion products of automotive gas engines. It is also available in aircraft quality. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-268. Producer or source: Carpenter.

MEEHANITE HA is a free machining high tensile engineering material designed especially to withstand intermittent heating conditions in service. This type of Meehanite metal resists growth under alternating heating conditions at temperatures up to 1100 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on casting and machining. Filing Code: CI-18. Producer or source: Meehanite Metal Corporation.

NDZ-BRONZE is a copper-base alloy recommended as a high-strength dezincification and dealuminization resistant valve stem material in water supply systems. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting and machining. Filing Code: Cu-113. Producer or source: R. Lavin & Sons Inc..

CARPENTER 80-20 ALLOY is a nickel-chromium alloy intended for service at high temperatures. It offers good corrosion resistance to exhaust gases in aircraft piston engines. Considerable quantities of this alloy have been used as welded overlays on valve heads for aircraft engine exhaust valves. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-264. Producer or source: Carpenter.

Mueller 6730 is a forgeable (leaded) bronze bearing alloy possesing good machinability for use with hard or soft mating members where moderate strength will suffice. It is recommended for gears, pump parts, thrust bearings, valve seats, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-195. Producer or source: Mueller Brass Company.

Hidurel 5 is a precipitation-hardening copper-nickel-silicon bronze alloy with high conductivity and strength, corrosion resistance to marine environments and hydrogen embrittlement, and good antifrictional properties. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on machining. Filing Code: CU-607. Producer or source: Langley Alloys Ltd.

TIMETAL 62S, because iron is used for the beta stabilizer in lieu of more expensive elements, has a lower formulation cost than most titanium alloys, yet the properties and processing characteristics of Ti-6A1-2Fe-0. 1Si are equivalent to or better than those of the workhorses of the titanium industry, including Ti-6A1-4V. The combination of reasonable cost and excellent mechanical properties make TIMETAL 62S a practical substitute for other engineering materials in numerous industrial applications that require low weight and high corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating. Filing Code: Ti-102. Producer or source: Timet.