ACO Eurobar EN-GJS-350-22C is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%. It is specifically designed for applications where tensile strength is less important than the impact and elongation properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-102. Producer or source: ACO Eurobar GmbH.

ISO1083/JS/350-22-RT is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%, when measured on test pieces machined from separately cast samples. It is specifically designed for applications where tensile strength is less important than impact and elongation properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-103. Producer or source: International Organization for Standardization.

ISO1083/JS/400-18-LT is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%, when measured on test pieces machined from separately cast samples. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-104. Producer or source: International Organization for Standardization.

ISO1083/JS/400-15 is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-105. Producer or source: International Organization for Standardization.

Rio Tinto A356.2 is a heat-treatable, aluminum-silicon-magnesium casting alloy (3xx.x series) that is available in the ingot form for remelting. It is used extensively for producing general-purpose sand and permanent mold castings that require a combination of medium strength with good elongation, very good corrosion resistance, and excellent casting characteristics. Alloy A356.0, which is a higher purity, low iron version of alloy 356.0, provides better elongation and somewhat higher tensile strength. Alloy A356.0 is used in premium, higher strength applications and is used extensively in safety critical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-499. Producer or source: Rio Tinto Limited.

ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

55-06 and 70-02 Ductile Dura-Bar are continuously cast ductile irons with about 50 and 75% pearlitic microstructures, respectively. 55-06 has about the same tensile strength as SAE 1045 as-hot-rolled steel. Its maximum yield strength and elongation are equivalent to a eutectoid carbon steel. 70-02 Ductile Dura-Bar has somewhat greater tensile strength up to 3 diameter and considerably higher yield strength up through 10 diameter. The elongation of 70-02 is lower than that of 55-06 because of its reduced ferrite content. This datasheet provides information on composition, microstructure, and hardness. It also includes information on heat treating. Filing Code: CI-62. Producer or source: Federal Bronze Products Inc..

Raffmetal EN AB-Al Si7Mg0.3 (EN AB-42100) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This alloy can be produced to a wide range of mechanical properties by making small adjustments to the magnesium content and/or heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-480. Producer or source: Raffmetal S.p.A.

Rheinfelden Castasil-37 (AlSi9MnMoZr) is an aluminum-silicon-manganese-molybdenum-zirconium high pressure die casting (HPDC) alloy. It was developed by Rheinfelden Alloys GmbH for the production of large and complex high pressure die castings for automotive structural applications. This alloy is used in the as-cast condition, and exhibits good mechanical properties, especially elongation, which are superior to those of conventional aluminum-silicon alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, and joining. Filing Code: Al-481. Producer or source: Rheinfelden Alloys GmbH & Co. KG.

Ed Fagan Molybdenum Lanthanum Oxide, often referred to as lanthanated molybdenum, MoLa or ML, is an oxide dispersion strengthened alloy. It is produced by combining small amounts of lanthanum oxide (La2O3) particles with molybdenum. This creates a special stacked fiber microstructure that is stable at temperatures up to 2000 °C (3630 °F). After recrystallization, the elongated grain structure with jagged grain boundaries provides a measurable increase in ductility and creep resistant strength over that seen with pure molybdenum. Ed Fagan Molybdenum Lanthanum Oxide is the preferred material when embrittlement after recrystallization must be avoided. This alloy maintains its dimensional shape stability at high-temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on wear resistance as well as heat treating and machining. Filing Code: Mo-21. Producer or source: Ed Fagan Inc.

Raffmetal EN AB-Al Si7Mg0.6 (EN AB-42200) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold, and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-483. Producer or source: Raffmetal S.p.A.

Meehanite SFF350 is a ferritic ductile iron with a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 24%, when measured on test pieces machined from separately cast samples. It is specifically designed to provide good impact properties at low temperature. This fully ferritic Meehanite grade is produced from specially selected high purity raw materials and by subjecting the castings to an extended annealing heat treatment in order to fully develop the mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and joinability. Filing Code: CI-90. Producer or source: Meehanite Metal Corporation.

Meehanite SFF400 is a ferritic ductile iron with a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 20%, when measured on test pieces machined from separately cast samples. It is specifically designed to provide good impact properties at low temperature. This fully ferritic Meehanite grade is produced from specially selected high purity raw materials in order to fully develop the mechanical properties in the as-cast condition. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and joining. Filing Code: CI-93. Producer or source: Meehanite Metal Corporation.

Meehanite SF400 is a ferritic ductile iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 17%, when measured on test pieces machined from separately cast samples. This fully ferritic Meehanite grade is produced by either strict control of the raw materials during melting or by an annealing heat treatment to eliminate any pearlite formed during solidification. Meehanite SF400 is specifically designed for general engineering applications where high ductility and exceptional resistance to impact is required. It also provides maximum toughness at ambient temperatures. Compared with cast steel of similar strength, it is possible to reduce machining times by up to 25%. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on casting, heat treating, and machining. Filing Code: CI-98. Producer or source: Meehanite Metal Corporation.

Rio Tinto C355.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting, to be used for the production of sand and permanent mold castings. Alloy C355.0 is a higher purity, low iron version of alloy 355.0. Both the alloys are similar, except the lower iron in C355.0 provides better elongation and somewhat higher tensile strength. Alloy C355.0 is used in premium, high strength applications where castings are usually heat treated for maximum strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-490. Producer or source: Rio Tinto Limited.

RAFFMETAL EN AB-Al Si10Mg (EN AB-43000) is a heat-treatable, aluminum-silicon-magnesium casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring a combination of excellent casting characteristics, high strength with fair elongation, and fair corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Al-491. Producer or source: Raffmetal S.p.A.

ACO Eurobar EN-GJS-350-22C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%, and it is specifically designed to provide good impact properties at low temperature. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating. Filing Code: CI-101. Producer or source: ACO Eurobar GmbH.

ATI 302 (UNS S30200) is a variation of the 18Cr-8Ni austenitic alloy, the most familiar and most frequently used stainless steel. This alloy may be considered for a wide variety of applications where one or more of the following properties are important: resistance to corrosion, prevention of product contamination, ease of fabrication, attractive surface, ease of cleaning, or good strength and oughness at cryogenic temperatures. Past users of ATI 302 are generally now using ATI 304 because argon oxygen decarburizationtechnology has made lower carbon levels more easily attainable and economical. ATI 302 may be preferred over ATI 304 for temper rolled products or in other instances where its higher carbon content enables it to meet certain yield strength and tensile strength requirements while maintaining a higher level of ductility (elongation) versus that of the lower carbon ATI 304. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-1360. Producer or source: ATI.

Meehanite SF420.12 is a ductile iron that has a minimum tensile strength of 420 MPa (61 ksi) and a minimum elongation of 12%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF420.12 is of particular interest to design engineers wishing to replace fabrications or malleable iron castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-106. Producer or source: Meehanite Metal Corporation.

Meehanite SF450.15 is a ductile iron that has a minimum tensile strength of 450 MPa (65 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF450.15 is of particular interest to design engineers wishing to replace fabrications or non-alloy steel castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-107. Producer or source: Meehanite Metal Corporation.