Search Results for electrical workability

CHASE PHOSNIC BRONZE is a high copper alloy combining high strength and high conductivity, both electrical and thermal, in an unusual degree. It has high workability and excellent corrosion resistance. The additions of nickel and phosphorus to the copper render the alloy capable of being hardened and strengthened by age-hardening heat treatment. The alloy has also high endurance strength in the harder drawn tempers of wire, and excellent resistance to creep or flow under the influence of prolonged stress. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-12. Producer or source: Chase Brass & Copper Company Inc.. Originally published November 1953, revised February 1965.

COLMONOY NO. 5 comprises a chromium-boride-containing, nickel-base alloy recommended for hard surfacing parts to resist wear, corrosion, heat and galling. Deposits, which have only moderate hardness (Rockwell C 45-50), may be machined with carbide tooling. Also, deposits have fairly good workability, ductility and impact strength. Colmonoy No. 5 is supplied as crushed powder for application with Wall Colmonoy's SPRAYWELD Process. Also, it is supplied as bare or coated rod for either oxyacetylene or DC electric-arc (reverse polarity) application, as well as castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: Ni-217. Producer or source: Wall Colmonoy Corporation.

NIMAG 60 is a non-magnetic nickel alloy with good resistance to oxidation at high temperatures and to corrosion in many environments. It is a solid-solution alloy that can be hardened only by cold working and it has excellent mechanical properties with a desirable combination of high strength and good workability. It has many electrical and electronic applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-240. Producer or source: Spang Industries Inc..

ENDURO 202 is a non-hardenable austenitic chromium-nickel-manganese stainless steel having similar mechanical properties and corrosion resistance to AISI Type 302 stainless steel. It is a general purpose corrosion resisting steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-65. Producer or source: Republic Steel Corporation.

COPPER No. C15700 is a dispersion hardened copper fabricated by powder metallurgy techniques. It has good strength and electrical conductivity. It has applicability at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-544. Producer or source: SCM Metal Products. Originally published February 1989, revised December 1989.

COPPER ALLOY C18090 is a solid solution strengthened strip alloy, 96% minimum copper. It has good electrical conductivity and tensile strength ranging from 60,000 psi, annealed to 100,000 psi, spring temper. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-558. Producer or source: Copper and copper alloy mills. See also Alloy Digest Cu-569, February 1992.

KANTHAL 70 alloy was designed to provide a high positive temperature coefficient to electrical resistance comparable with that of pure nickel; however, it has much higher electrical resistivity than pure nickel. This makes it useful as a voltage regulator when placed in series with another electrical device across a fluctuating voltage source. Kanthal 70 has a maximum recommended operating temperature of 600 C and is used widely in resistance thermometers and in various appliance and automotive applications. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-270. Producer or source: The Kanthal Corporation.

Copper Alloy No. C19210 has a nominal copper content of 99.9%. It is not heat-treat hardenable but it can be hardened by cold work. Its electrical conductivity is 80% IACS @ 68 F and it has good heat resistant characteristics. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-570. Producer or source: Copper and copper alloy mills.

COPPER ALLOY NO. C18090 is a strip alloy, not hardenable by heat treatment. It may be hardened and strengthened by cold work. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-569. Producer or source: Copper and copper alloy mills. See also Alloy Digest Cu-558, March 1991.

Ansonia alloys C19140 and C19160 are precipitation-hardening alloys. Properties of these alloys are enhanced by additional cold work. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-754. Producer or source: Ansonia Copper & Brass Inc.

AL TECH A-HT is a tool steel for difficult cold-work applications. It is somewhat similar to AISI Type A2 in alloy content but with increased wear resistance. Additions of titanium and tungsten produce hard, long-wearing carbides that help to decrease galling and metal pick-up. The main advantages of AL TECH A-HT are: (1) Very high wear resistance, (2) Good toughness, (3) Air hardening and (4) Low distortion in heat treatment. A-HT is used where better wear resistance is required than is attainable using AISI Type A2 or better toughness than AISI Type D2. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-457. Producer or source: AL Tech Specialty Steel Corporation.

COPPER No. C15715 is a dispersion hardened copper fabricated by powder metallurgy techniques. Its electrical conductivity is 92% IACS and its annealed tensile strength (0.050 in. diameter wire) is 52000-66000psi, depending on annealing temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-547. Producer or source: SCM Metal Products.

CUNISIL-647 is a copper-nickel-silicon precipitation-hardening alloy having high strength, hardness, wear and corrosion resistance. Typical applications include electrical hardware and fasteners. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Cu-164. Producer or source: Anaconda American Brass Company.

UNS C16200 is a solution strengthened electrical conducting copper. It is additionally hardenable by cold work. Cadmium confers high anneal resistance to the alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-541. Producer or source: Copper alloy producers. See also Alloy Digest Cu-535, February 1988.

Copper Alloy No. 165 is a copper-cadmium-tin alloy with low strength and high ductility in the annealed condition. In the hard-drawn condition, characterized by high strength and low ductility, it is used widely as an electrical conductor. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-327. Producer or source: Copper and copper alloy mills.

Ni-Cr 80-20 Alloy is an electrical-resistance alloy suitable for operation at temperatures up to 2100 F (1150 C). It has a low temperature coefficient of resistivity and is also highly resistant to corrosion and oxidation. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-196. Producer or source: Electrical resistance alloy producers.

Copper alloys C17400 and C17410 are high thermal and electrical conductivity materials that reflect modest strengthening from their low alloy contents. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-555. Producer or source: Copper and copper alloy mills.

ALUMINUM 6463 is an aluminum-magnesium-silicon alloy used widely for extrusions. It can be hardened and strengthened by a precipitation-hardening heat treatment. Its many applications comprise extrusions for trim and archtectural use in the automotive, appliance and building industries. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-189. Producer or source: Various aluminum companies. Originally published August 1969, revised May 1981.

Olin C195 is a high-strength, high-conductivity copper alloy developed for applications in current-carrying parts. Typical applications are electrical springs, connectors, and clips. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-649. Producer or source: Olin Brass.

COPPER No. 120 is a phosphorus deoxidized copper in which the residual phosphorus is maintained at a low level to acheive a good electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-263. Producer or source: Copper and copper alloy mills.