Precision C is a heat-treatable nickel-iron alloy used in critical diaphragm applications. The alloy composition provides a unique constant elastic modulus value over a temperature range of -50 to 150 deg F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: FE-113. Producer or source: Hamilton Precision Metals Inc.

HPM Precision C is heat treatable and has a constant elastic modulus value. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: Fe-153. Producer or source: Hamilton Precision Metals.

Berylco 7 is beryllium copper alloy with 0.3% beryllium. The alloy has high conductivity, fatigue strength, and wear resistance and is nonmagnetic. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well asfatigue. Filing Code: CU-641. Producer or source: NGK Metals Corporation.

Carpenter Low Expansion 43-PH is an age hardenable iron/nickel austenitic alloy. It differs from most metals and alloys in that it has a constant modulus of elasticity over a temperature range of -30 to +150 F(-47 to +66 C). Its thermal elastic coefficient can be adjusted to zero or near zero by varying the aging temperature and degree of cold work prior to aging. The alloy possesses high strength and good formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-91. Producer or source: Carpenter.

Berylco 14 is a beryllium copper alloy with 0.4% Be. The alloy is an automotive industry favorite similar to Berylco 10 (see Alloy Digest Cu-6, April 1953) but with nickel substituting for cobalt. The alloy has high thermal and electrical conductivity, good strength, and superior high-temperature performance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on heat treating. Filing Code: CU-642. Producer or source: NGK Metals Corporation.

Olin Brass Alloy C19020 is a copper-nickel-tin low-alloyed copper. It was developed as alloy NB-105 by Dowa Metaltech Company Limited, Japan, to meet increasing requirements of current carrying capacity, stiffness, formability and service temperature survivability being demanded by the automotive and electronic industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: Cu-905. Producer or source: Olin Brass, GBC Metals, LLC.

ISO-ELASTIC is an iron-nickel alloy having low temperature coefficient of the modulus of elasticity. It is suitable for precision instrument springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Fe-14. Producer or source: John Chatillon & Sons.

Wieland Duro Tungsten is unalloyed tungsten produced from pressed-and-sintered billets. The high melting point of tungsten makes it an obvious choice for structural applications exposed to very high temperatures. Tungsten is used at lower temperatures for applications that can benefit from its high density, high modulus of elasticity, or radiation shielding capability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining. Filing Code: W-34. Producer or source: Wieland Duro GmbH.

Deutsche Edelstahlwerke Cryodur 2008 is a high-carbon, chromium-vanadium alloy cold-work tool steel that is suitable for applications requiring a combination of high strength, good toughness, and good wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-832. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

Böhler K313 is a chromium-molybdenum-vanadium alloy cold-work tool steel that is characterized by good toughness and high wear resistance as well as retention of hardness and hot wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as forming and heat treating. Filing Code: TS-828. Producer or source: voestalpine Böhler Edelstahl GmbH & Co KG.

Alcoa EZCast 370 is a heat-treatable, aluminum-silicon-magnesium-manganese high-pressure die casting (HPDC) alloy which is widely used for thin-walled, crash-resistant, structural components for automotive applications. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on joining. Filing Code: Al-461. Producer or source: Alcoa Corporation.

SPS Technologies Aerex 350 is a proprietary high-strength, corrosion-resistant nickel-based superalloy that is suitable for demanding applications up to 730 °C (1350 °F). It has the highest temperature limit of the three SPS superalloys. Like MP35N and MP159, this alloy not only undergoes the multiphase reaction, but also benefits from two additional strengthening mechanisms. Elements are also added to the chemical composition to cause precipitation of the gamma prime phase with higher temperature capability than MP159. Because this alloy is used at even higher temperatures than MP159, elements are added to the chemical composition to also cause the precipitation of eta phase during thermal treatments. This phase contributes to notch toughness at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance. Filing Code: Ni-780. Producer or source: SPS Technologies, Inc.

Deutsche Edelstahlwerke Cryodur 2327 is a high-carbon, chromium-molybdenum alloy cold-work tool steel. It is a shell hardenable grade with high wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-833. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

Alcoa A354 VersaCast is a proprietary, heat-treatable, Al-Si-Cu-Mg casting alloy (3xx.x series). Owing to its high strength, high ductility, and very good casting characteristics, it is used for the most demanding structural applications. It also is used as a costeffective alternative to ductile iron castings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting. Filing Code: Al-473. Producer or source: Alcoa Corporation.

Deutsche Edelstahlwerke Cryodur 2249 is a medium-carbon, silicon-chromium-vanadium alloy cold-work tool steel that provides an attractive combination of high strength, high hardness, and high toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating. Filing Code: TS-817. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

Mueller Brass Alloy C34500 is a copper-zinc-lead (leaded brass) alloy that is suitable for applications requiring extensive machining before cold-forming operations such as swaging, flaring, severe knurling, or thread rolling. Melting temperature values corrected December 2020. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Cu-908a. Producer or source: Mueller Brass Company. original 05/20, revised 12/20.

Aurubis C12200 (Cu-DHP) is a phosphorus-deoxidized copper, that contains a minimum of 99.9% copper and high residual phosphorus (0.015–0.040%). It is the most widely used copper for tube and pipe but also finds widespread use for sheet and strip items. Aurubis C12200 exhibits better ductility than Cu-ETP and is adaptable for progressive drawing operations requiring few or no intermediate anneals. A major advantage of Aurubis C12200 is the freedom from hydrogen embrittlement susceptibility in reducing atmospheres. This advantage is utilized in the cladding of steel and subsequent reducing atmosphere anneals without incurring the embrittlement, which occurs when cladding with Cu-ETP. The electrical and thermal conductivity are lower when compared with Cu-ETP but adequate for many applications as exemplified by a major use of strip to produce air conditioning and refrigeration tubing by gas shielding arc welding techniques. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-934. Producer or source: Aurubis AG.

Luvata C511 is a very common and frequently used alloy. The 4% tin and 96% copper alloy is deoxidized with 0.2% P. It is often called CuSn4. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-782. Producer or source: Luvata Sales (USA) Inc.

SANDVIK 11R51 is a stainless steel having high fatigue and tensile strengths. It is recommended for springs requiring corrosion resistance and high torque values. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming. Filing Code: SS-177. Producer or source: Sandvik.

Mueller Brass C48500, also known as leaded naval brass, is a wrought copper-zinc-lead-tin alloy. It is a high-zinc brass to which a small amount of tin is added to improve its corrosion resistance and also to impart higher strength. Tin, like arsenic, antimony, and phosphorus, reduces susceptibility to dezincification. Mueller Brass C48500 possesses good hot formability and is fairly well adapted to any hot working process including forging. Due to its lead content, the alloy has poor cold forming characteristics. Due to this limitation, this alloy is best suited for machining applications rather than typical cold working operations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-936. Producer or source: Mueller Brass Company.