Skip Nav Destination
Search Results for ducts
1-20 of 114 Search Results for
Alloy Digest (1971) 20 (2): Ni-162.
Published: 01 February 1971
... TOPHET H is a heating-element alloy specifically designed for use in duct heaters and clothes dryers where hot strength and long life are of most importance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information...
Alloy Digest (2004) 53 (11): SS-913.
Published: 01 November 2004
... Sirius S15 is a high-temperature stainless steel with the elements silicon, cerium, and lanthanum added for an oxidation resistance that is better than AISI Type 310. Applications are in burners, recuperators, and ducts. This datasheet provides information on composition, physical properties...
Alloy Digest (2005) 54 (8): SS-937.
Published: 01 August 2005
... Sirius 314 is a high-temperature stainless steel with the elements of silicon, cerium, and lanthanum added for better oxidation resistance compared to AISI Type 310. Applications are in burners, recuperators, and ducts. This datasheet provides information on composition, physical properties...
Alloy Digest (1988) 37 (4): Ni-330.
Published: 01 April 1988
... remarkable corrosion resistance in the especially corrosive areas of flue gas desulfurization systems, such as outlet ducting leading to the stack. It has also been used to solve corrosive problem areas in municipal sewage treatment plants. Specification Equivalents: ASTM B 575. UNS N 10276. ASME SB-575...
Alloy Digest (1985) 34 (3): Ni-311.
Published: 01 March 1985
... IN ABSORBER SLURRY, MAXIMUM PITTING OR CREVICE ATTACK* [Units are mpy (mm/yr)] Absorber Outlet Material Quencher Absorber Bypass Outlet Duct Duct AlSl 316L 22 (55) 21 (53) 35 (.90)1 35 (.88 I2 (30) AlSl 317LMo 20 (50) 22 (55) 29 (.73) 33 (85) Alloy 825 I5 (38) 29 (.73) 33 (.85) 39 (1.00) 50 (1.28 Alloy 904L...
Alloy Digest (1963) 12 (4): Cu-20.
Published: 01 April 1963
... by the fabricator, reaches strengths and hardnesses appreciably higher than bronze. Through good formability, it offers cost-saving opportunities by eliminating hardening. It combines good duct&ty with high strength and hardness, good eIectricaI and thermal conductivity, and excellent resistance to wear and fatigue...
Alloy Digest (2004) 53 (10): SS-910.
Published: 01 October 2004
... to 14,000 up to 551 Applications: Typical applications include grids, burners, and suction boxes in sintering plants; heat recuperators, charging mechanisms, circulation, and piping in blast furnaces and cooling ovens; extraction hoods, flue gas ducts, and dampers in steel melting and smelters; rollers...
Alloy Digest (2016) 65 (2): Co-125.
Published: 01 February 2016
... °C (2000 °F), and good sulfidation resistance. This alloy also has good forming and welding characteristics, which make it useful in fabricating gas turbine components such as combustion cans and transition ducts. The alloy has a face- center cubic structure. High tungsten content provides solid...
Alloy Digest (1959) 8 (6): Ti-1.
Published: 01 June 1959
... by stress relief anneal at 80tY F or full anneal at 1250°F to eliminate possible delayed breakage. Forms Available: Applicatioms: Airaaft skins, structural braces, ducts and shrouds. Various a&raft forgiogq jet atginc axnpoaalb aad other parts operating at tan- up to about 7OO F. MMUfOCtOWC Republic steel...
Alloy Digest (1962) 11 (7): Cu-119.
Published: 01 July 1962
... No. 9494 is recommended for pro- ducts demanding qualities of non-leaded phosphor bronze yet which must be cut, threaded or milled. For high speed automatic cutters. It has good strength and ductility. Forms Available: Rods Bolts, nuts, shafts, pinions, screws, bearings, gears, plugs, screw machine...
Alloy Digest (2005) 54 (2): SA-546.
Published: 01 February 2005
... in Fig. 1 in a comparative wear test con- ducted in a paddle wear machine for hot-rolled materials. Specification Equivalents: This material conforms and is supplied to European Standard EN 10131, including tolerances. General Characteristics: Prompted by demand for product durability, wear, and perform...
Alloy Digest (2005) 54 (5): Ni-625.
Published: 01 May 2005
... Applications: Haynes 617 alloy is used in applications such as gas turbines for combustion cans, ducting, and transition lines. HAYNES® ALLOY NO. 617 Filing code: Ni-625 Nickel May 2005 HAYNES® ALLOY NO. 617 (Nickel-Base Superalloy) Haynes 617 is a solid-solution Ni-Cr-Co-Mo alloy with excellent high...
Alloy Digest (2020) 69 (4): Co-130.
Published: 01 April 2020
... sulfidation resis- tance, nonmagnetic. Product Forms Bar, coil, sheet Applications Afterburner liners, aircraft engine components, combustor cans, flame holders, gas turbines, transition ducts Supplier United Performance Metals 3475 Symmes Road Hamilton, Ohio 45015, USA Tel: +1 513 860 6500 Web: www.upmet.com...
Alloy Digest (2020) 69 (7): Ni-761.
Published: 01 July 2020
... Components for industrial and aircraft gas turbines (e.g., casings, combustion chambers, and ducting), and structural components for industrial furnaces. Supplier ATI 1000 Six PPG Place Pittsburgh, Pennsylvania 15222, USA Tel: +1 800 289 7454 Web: www.atimetals.com ISSN 002-614X Ni-761B ...
Alloy Digest (2002) 51 (9): Ni-590.
Published: 01 September 2002
... treatment, and furnace components; flare tips; ducting and gas turbine parts. Producer: Metrode Products, Ltd. Hanworth lane, Chertsey Surrey, KT16 9LL +44(0)1932 566721 +44(0)1932 566168 (Sales fax) +44(0)1932 569449 (Technical fax) +44(0)1932 566199 (Export fax) ISSN: 002-614X Ni-590B ...
Alloy Digest (2020) 69 (2): Ni-756.
Published: 01 February 2020
... applications, up to about 760 °C (1400 °F), that require good elevated temperature strength, low thermal expansion, and good oxidation resistance. Typical applications in the aerospace industry include casings, containment rings, duct segments, fasteners, pumps, rocket nozzles, and sealing rings. Supplier ATI...
Alloy Digest (1956) 5 (10): Cu-43.
Published: 01 October 1956
...&- tmce to corrosion and may be used for screw machine pt-0. ducts which are reqtkd to withstand severely cortive cuoditiouS. IO tin and Itod c0oteom make it my useful for baring pmposa Forms Avail&k: Comosion Resistance: Rod.%rOkd~PrOdW%=dsaip. Highly &stint to corrosion, being unakted by, and free from...
Alloy Digest (1959) 8 (2): Mg-40.
Published: 01 February 1959
...- vented by suitable methods of insulation. General Characteristics: Magnesium W62A alloy has very high tensile strength, ductility and excellent fatigue properties. It shows a very low tendency towards miaoporosiy. The alloy has the best combination of strength, duct&y and pressure tighmess yet attained...
Alloy Digest (1959) 8 (3): Co-17.
Published: 01 March 1959
... by a lowering of duct&y. Machinability: Easily machined with carbide tooh ar speeds of 28 to 42 surface feet per minute. Suggested at&s for single- point tools are 4-6 degree front and side angles, O-8 degree back top rake, 5-8 degree side rake, 15-30 degree side cutting-edge angle, and 15 degree end cut- ting...
Alloy Digest (1996) 45 (9): Be-8.
Published: 01 September 1996
... been con- ducted on several lots of material and are the basis for this data sheet. The test material was consolidated by extrusion of gas atomized Powder containing 62 wt.% Be and 38 wt.% Al. DOI: 10.31399/asm.ad.be0008 Table 1 AlBeMet AM 162 Properly Data Sheet Table 2 AlBeMet AM162 Typical...