Search Results for drilling components

Staballoy AG17 is a very high manganese stainless steel developed for severe service in downhole drilling conditions. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as machining. Filing Code: SS-857. Producer or source: Allvac Ltd.

BERYLCO Alloy 41C is a highly castable, air-melting nickel-base alloy; it is precipitation-hardenable to high strength and hardness. It exhibits excellent resistance to wear, corrosion and oxidation. Alloy 41C (formerly called Berylco CR-1, Alloy Digest Ni-27, September 1956) is the standard beryllium-nickel casting alloy that has been in use for over 40 years. Its many uses include tooling for plastics, glass-mold tooling, fuel-pump impellers, cores for Teflon molding and deep sour-well drilling components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-251. Producer or source: Kawecki Berylco Industries Inc..

Datalloy 2 is an enhanced corrosion-resistant nonmagnetic stainless steel. The composition contains a high level of manganese and nitrogen to stabilize the austenite. Applications include replacement of standard chromium-manganese steels in drill string components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as machining. Filing Code: SS-862. Producer or source: Allvac Ltd.

Staballoy AG 17 HS is an improved version of Staballoy AG 17 (see Alloy Digest SS-857, July 2002) with similar characteristics, but with higher yield strength and better fatigue properties. Applications include critical nonmagnetic drill stem components. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance. Filing Code: SS-868. Producer or source: Allvac Ltd.

ARMCO SSS 100A is a low-carbon, fine-grained, quenched-and-tempered alloy steel. It is strong, tough and readily fabricated with equipment and facilities suited to its high strength. It has a minimum yield strength of 100,000 psi. Among its many uses are structural components in heavy-duty trailers, buildings, bridges, ships, mobile drilling rigs and pressure vessels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-380. Producer or source: Armco Inc., Southwestern Steel Division.

Carpenter SCF 19 alloy is a high-strength and low-magnetic permeability alloy developed for nonmagnetic drill collars. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-748. Producer or source: Carpenter.

Pyromet alloy 706 has similarities to alloy 718, but improves fabricability and welding. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-723. Producer or source: Carpenter Specialty Alloys.

Ti 6Al-4V-0.1Ru alloy is an extra-low interstitial alloy version of Ti-6Al-4V offering improved fracture toughness in air and better corrosion resistance to crude oil with chlorides. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance as well as joining. Filing Code: TI-125. Producer or source: RMI Titanium Company.

Amagnit 501 is a low carbon austenitic stainless steel designed to be nonmagnetic for many oil field components and accessories. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: SS-1214. Producer or source: ThyssenKrupp Metallurgical Products USA.

NJZ ALLOY No. 25 is a zinc-copper-titanium alloy that offers outstanding high creep resistance and a low coefficient of expansion. It can be severely work hardened. Its applications include architectural building products, sporting equipment components, hardware and automotive trim. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-22. Producer or source: New Jersey Zinc Company.

REPUBLIC RSM 250 is an 18% nickel-cobalt-molybdenum age-hardening steel designed to develop 250,000 psi yield strength with good toughness. It is recommended where a combination of strength, toughness and notch resistance is required such as aircraft landing gears and jet engine components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-250. Producer or source: Republic Steel Corporation, Titanium Division.

Ti-5A1-4FeCr is an alpha-beta type titanium alloy recommended for airframe components. It responds to an age-hardening heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-58. Producer or source: Titanium alloy mills.

RUUKKI RAEX 500 (typical yield strength 1250 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-658. Producer or source: Rautaruukki Corporation.

ATLANTIC 8A Alloy is a cast manganese bronze offering an excellent combination of mechanical properties and resistance to corrosion in fresh and sea water. It is used for applications such as gears, marine hardware and waveguide components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-303. Producer or source: Atlantic Casting and Engineering Corporation.

NJZ Alloy No. 45 is a zinc-copper alloy characterized by high hardness and strength, good ductility and high stiffness. It work hardens easily. Among its many applications are hardware, sporting-equipment components, cable wrappings and watch cases. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-25. Producer or source: New Jersey Zinc Company.

HOWMET No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. It is recommended for bushings, scrapers, valve parts, and other machinery components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-56. Producer or source: Howmet Corporation Metal Products Division.

ABREX 600 (hardness target of 600 HBW) is one of the Abrex series of abrasion resistant steel plate alloys. Abrex 600 is a standard option. All of the products are maintained at very low impurity levels, making them well suited to welding and forming. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-765. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Steel HT10 contains lead to make it easier to form, cut, mill, and drill. Applications are in the watch industry. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming. Filing Code: SA-790. Producer or source: Lamineries Matthey SA.

NIMONIC 93 is a nickel-base alloy having high elevated temperature strength, high oxidation resistance and good corrosion resistance. It is recommended for jet engine and gas turbine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-153. Producer or source: Henry Wiggin & Company Ltd.

AMPCO M-4 is a copper-aluminum-nickel-iron-manganese alloy that possesses high hardness, high strength, good resistance to fatigue and wear, and excellent resistance to corrosion. It is used in both cast and wrought forms. Typical applications include marine hardware, aerospace components, wear plates, gears, bushing and pickling equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-469. Producer or source: Ampco Metal Inc..