Search Results for dies

MX01 is a steel grade developed to achieve useful properties to minimize the cost of forging dies. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: SA-708. Producer or source: Industeel USA, LLC.

CARMO is the prehardened version of CALMAX (see Alloy Digest TS-177, March 1966). It is particularly suitable for flame and induction hardening of large press work tooling where excessive distortion after heat treatment is likely and also for prototype or very short run tooling. Its good weld-ability means that minor weld repairs can be carried out in the press. CARMO/CALMAX can be supplied in various finishes including the hot-rolled, rough-machined, and fine-machined executions. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-597. Producer or source: Böhler Uddeholm N.A.

Di-Form 140T is an ultrahigh-strength steel that offers a combination of high strength and high ductility, making it an excellent choice for parts consolidation programs. This datasheet provides information on composition, physical properties, and tensile properties. Filing Code: CS-137. Producer or source: Ispat Inland.

Mittal Di-Form T500 is a dual-phase steel intended primarily for exposed outer automotive body panels (door, hoods, and fenders). Dual-phase steels are one of the important advanced high-strength steel products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The Di-Form grades exhibit low yield-to-tensile strength ratios and the name corresponds to the tensile strength. This datasheet provides information on tensile properties as well as deformation and fatigue. It also includes information on forming and joining. Filing Code: SA-556. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM T590 and T600 are low-carbon dual-phase steels containing manganese and silicon. Dual-phase (DP) steels are important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strength ratios. The numeric designation in the grade name corresponds to the tensile strength in MPa. This datasheet provides information on microstructure, tensile properties, and bend strength as well as fatigue. It also includes information on forming. Filing Code: SA-558. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM T700 and HF80Y100T are low-carbon steels with a manganese and silicon composition. Dual-phase (DP) steels are one of the important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strengths, and the numeric designation in the name corresponds to the tensile strength. This datasheet provides information on microstructure and tensile properties as well as deformation and fatigue. It also includes information on forming. Filing Code: SA-561. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM T780 and T980 alloys are low-carbon steels with a manganese and silicon composition. Dual-phase (DP) steels are one of the important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strength ratios and the name corresponds to the tensile strength. This datasheet provides information on forming. Filing Code: SA-563. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM 140T and HB T965 are low carbon steels with dual phase manganese and silicon composition. Dual-phase (DP) steel microstructures typically consist of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The dual-phase grades, including those with high tensile strengths of 965 MPa (140 ksi), that are designed for forming (DI-FORM), also have low yield-strength-to-tensile-strength ratios to improve formability. This datasheet provides information on microstructure and tensile properties as well as deformation and fatigue. It also includes information on forming and surface treatment. Filing Code: SA-566. Producer or source: Mittal Steel USA Flat Products.

DI-MC 355 is a weldable fine-grained thermomechanically rolled steel for structural design. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-714. Producer or source: Dillinger Hütte GTS.

DI-MC 460 is a weldable fine-grained thermomechanically rolled steel for structural design. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-717. Producer or source: Dillinger Hütte GTS.

DI-METAL 3 is a zinc-base alloy of high fluidity capable of producing fine detail in die castings. It is the most stable of the zinc die casting alloys, but on aging loses about 20% of its tensile strength with practically no impact drop. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-3. Producer or source: Federated Metals Corporation, ASARCO Inc..

Armco DI-MAX nonoriented electrical steels have practically identical magnetic properties in any direction of magnetism in the plane of the material. They have superior permeability at high inductions, low average core loss, good gage uniformity, excellent flatness, and a high stacking factor. This datasheet provides information on composition, physical properties, hardness, and tensile properties. Filing Code: FE-88. Producer or source: Armco Inc., Specialty Steels Division. Originally published April 1989, revised January 1999.

LUMDIE is a tungsten-chromium hot work steel recommended for die casting dies, forging and extrusion dies. It is an air hardening steel having high temperature properties and heat resistance. It is particularly suited for long run die casting dies, brass forging dies, and for various extrusion tools such as dummy blocks, dies, and mandrels. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-194. Producer or source: Latrobe Steel Company.

Seneca Hot Die is a tungsten-chromium-vanadium type hot work steel having good red hardness and abrasion resistance. It is recommended for forging dies, copper extrusion dies, die casting dies, and other hot work tools and dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-150. Producer or source: Atlas Steels Company.

YSS YXR7 is a high-speed tool steel with good toughness and wear resistance. It is used for blanking dies, forging dies, heading dies, and thread forming dies. This datasheet provides information on composition, physical properties, hardness, and bend strength. It also includes information on heat treating. Filing Code: TS-783. Producer or source: Hitachi Metals America, Ltd.

AISI Type H12 is a general-purpose, low-carbon, chromium-molybdenum-tungsten hot-work steel for tools and dies that require high toughness. It has high hardenability and offers high resistance to softening in service at elevated temperatures. It also offers good resistance to heat checking and may be water cooled in service. It is suitable for hot-work applications involving severe conditions of shock and sudden temperature changes. Its many applications include hot shear blades, forging dies, extrusion dies, punches and other types of hot-work tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-381. Producer or source: Tool steel mills.

HOTFORM ULTRA is a modified 5% chromium hot-work die steel originally developed by the manufacturer in the 1960's. It possesses hot hardness superior to that of AISI Type H11 and AISI Type H13, and approaches the hot hardness of the tungsten-based hot-work die steels. Typical applications for Hotform Ultra include die-casting dies, core pins and inserts, piercing dies and hot-extrusion dies. This datasheet provides information on composition and physical properties. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: TS-440. Producer or source: Teledyne Vasco.

AISI Type H10 is a hot-work tool steel of the chromium type, although it contains a substantial amount of molybdenum. It is a high-hardenability steel and possesses a combination of high tensile strength and hardness with excellent toughness. Typical hot work applications include forging dies, extrusion dies, hot header dies, mandrels, punches and piercing tools. Consult the manufacturer for specific recommendations. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-442. Producer or source: Tool steel mills.

VISCOUNT 20 is an air-hardening, 5% chromium hot-work steel with the same analysis as Latrobe's VDC except for the addition of carefully controlled and evenly dispersed alloy sulfides. These additives improve the machinability of the steel so that it is an excellent selection for a variety of hot-work applications where machinability is of primary importance. Its many uses include forging and heading dies, aluminum extrusion dies, mandrels and mold dies for plastics. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-446. Producer or source: Latrobe Steel Company.

FIREDIE 9 is a chromium-molybdenum-cobalt hot-work steel. It has outstanding resistance to softening in elevated-temperature service; the cobalt gives this steel its superior heat resistance. Firedie 9 has excellent resistance to thermal shock; in fact, dies can be water cooled durin operation without fear of cracking. Among its many applications are forging dies, hot-extrusion mandrels, hot-shear blades, die-casting dies and hot punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-450. Producer or source: Columbia Tool Steel Company.