Search Results for damping capacity

ISO 185/JL/150 is an unalloyed low-tensile-strength gray cast iron that has high carbon and silicon contents, and thus the highest thermal conductivity and damping capacity. It is, therefore, useful in situations where high thermal conductivity, damping capacity, and machinability are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties. This datasheet provides information on composition, physical properties, tensile properties, shear and bend strength as well as fatigue. It also includes information on casting, heat treating, and machining. Filing Code: CI-67. Producer or source: International Organization for Standardization.

ISO 185/JL/250 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 250–350 MPa (36–51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/250 contains lower carbon and silicon contents and has superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-76. Producer or source: ISO Central Secretariat.

ACO Eurobar EN-GJL-150C (5.1102) is a low-tensile-strength gray cast iron that is produced by the continuous casting process. It is useful in situations where very high thermal conductivity, machinability, and damping capacity are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: CI-89. Producer or source: ACO Eurobar GmbH.

CEN EN-GJL-150 (5.1200) is a low-tensile-strength gray cast iron that has a tensile strength of 150–250 MPa (22–36 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It is useful in situations where high thermal conductivity, damping capacity, and machinability are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties, provided that the environment does not include abrasive debris that can score and wear the soft matrix. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-91. Producer or source: European Committee for Standardization.

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

CEN EN-GJL-200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, CEN EN-GJL-200 contains lower carbon and silicon contents and exhibits superior wear properties, while still maintaining good thermal conductivity, good damping capacity, and good machinability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on casting, heat treating, and machining. Filing Code: CI-96. Producer or source: European Committee for Standardization (CEN).

ISO 185/JL/225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 225–325 MPa (33-47 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on heat treating. Filing Code: CI-73. Producer or source: International Organization for Standardization (ISO).

STRENES C is a chromium-molybdenum gray iron alloy of high hardenability and high strength. Excellent resistance to wear and galling with high damping capacity. Can be readily machined. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-15. Producer or source: Advance Foundry Company. Originally published August 1956, revised May 1962.

MEEHANITE-GD is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-32. Producer or source: Meehanite Metal Corporation.

Nivco 10 is a cobalt-base turbine alloy having a combination of high damping capacity, high strength and high ductility. It is a precipitation hardening alloy recommended for use at temperatures up to 1200 F, such as turbine blades. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-37. Producer or source: Westinghouse Electric Corporation.

ISO 185/JL/200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi) when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, 185/JL/200 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-70. Producer or source: International Organization for Standardization.

ISO 185/JL/275 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 275–375 MPa (40–54 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/275 contains lower carbon and silicon contents, while still maintaining good thermal conductivity and damping capacity. Owing to its higher tensile strength and hardness, it exhibits superior wear properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-79. Producer or source: International Organization for Standardization.

Dura-Bar GX is a heat-treatable, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of moderate strength, good wear resistance, and good vibration damping capacity. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-83. Producer or source: Charter Dura-Bar, Inc.

Meehanite GE225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix and a minimum tensile strength of 225 MPa (33 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, Meehanite GE225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity and machinability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: CI-84. Producer or source: Meehanite Metal Corporation.

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. Brinell hardness values in Table 3 corrected September 2022. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

MEEHANITE GA is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on heat treating and machining. Filing Code: CI-5. Producer or source: Meehanite Metal Corporation.

MEEHANITE GC is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, permanent molds, lathe beds, bases, pistons, and engine castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on heat treating and machining. Filing Code: CI-8. Producer or source: Meehanite Metal Corporation.

MEEHANITE GE is a medium strength iron having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, pump bodies, valve bodies, steam cylinders, cylinder liners, casings, cylinder heads, and governor frames. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on casting, heat treating, and machining. Filing Code: CI-12. Producer or source: Meehanite Metal Corporation.

MEEHANITE GB is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, lathe beds, bases, pistons, crankshafts, camshafts, and general engineering castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: CI-22. Producer or source: Meehanite Metal Corporation.

Dura-Bar G2S is a high strength, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of superior hardenability, strength, and creep resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-80. Producer or source: Charter Dura-Bar, Inc.