1-20 of 940 Search Results for

creep-rupture properties

Sort by
Journal Articles
Alloy Digest (2010) 59 (4): SS-1060.
Published: 01 April 2010
... Kubota alloy HN is an austenitic Fe-Ni-Cr alloy with long-term creep-rupture properties that are intermediate between those of HK40 and HP40 alloys. Carburization resistance is better than that of HK40, but oxidation resistance is generally lower, making the alloy suitable for long service at 1095...
Journal Articles
Alloy Digest (1980) 29 (7): SS-373.
Published: 01 July 1980
... RA 800H is an austenitic iron-base, heat-resistant alloy with excellent high-temperature strength and good resistance to oxidation in air up to 2000 F (1090 C). High creep-rupture properties are obtained by a solution-anneal treatment followed by a rapid cool; grain size is controlled in the range...
Journal Articles
Alloy Digest (1975) 24 (3): SS-307.
Published: 01 March 1975
... Type HP is an iron-chromium-nickel alloy with a combination of elements that makes it resistant to both oxidizing and carburizing atmospheres at high temperatures. The alloy has good creep-rupture properties in the 1800-2000 F temperature range. It has an austenitic structure at all temperatures...
Journal Articles
Alloy Digest (1976) 25 (6): SS-329.
Published: 01 June 1976
... UNITEMP 1420WM is a hardenable 12% chromium stainless steel containing nickel, molybdenum, tungsten and vanadium additions to attain high strength up to 1200 F. Its good creep-rupture properties and resistance to stress-corrosion cracking make this steel well suited for jet engines and many other...
Journal Articles
Alloy Digest (1996) 45 (9): SS-654.
Published: 01 September 1996
... Wiscalloy 25-35Nb is a high-temperature cast heat-resistant stainless steel with good creep-rupture properties. The alloy is centrifugally cast and is often used as petrochemical furnace tubing. This datasheet provides information on composition, physical properties, and tensile properties as well...
Journal Articles
Alloy Digest (1996) 45 (11): SS-656.
Published: 01 November 1996
... Wiscalloy 25-35NB MA is a high-temperature cast heat-resistant microalloyed stainless steel with good creep-rupture properties. The alloy is centrifugally cast and is often used as petrochemical furnace tubing. This datasheet provides information on composition, physical properties, and tensile...
Journal Articles
Alloy Digest (1998) 47 (10): SS-731.
Published: 01 October 1998
... MO-RE 10 is a fully austenitic, heat-resistant cast alloy with good creep-rupture properties. Typical applications include pyrolysis and reformer tubing. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information...
Journal Articles
Alloy Digest (2021) 70 (4): Ni-769.
Published: 01 April 2021
... VDM 601 (Nicrofer 6023 H) is a nickel-chromium-iron alloy with additions of aluminum and titanium. This alloy is specifically recommended for service above 550 °C (1020 °F) because of its superior creep-rupture properties resulting from its controlled carbon content and coarse grain size...
Journal Articles
Alloy Digest (1991) 40 (4): Ni-393.
Published: 01 April 1991
... ALLVAC 90 is a nickel-base alloy containing cobalt to provide improved tensile and creep-rupture properties up to 1600 F (871 C) and chromium for oxidation and corrosion resistance. Titanium and aluminum confer precipitation characteristics. This datasheet provides information on composition...
Journal Articles
Alloy Digest (2001) 50 (4): Ni-564.
Published: 01 April 2001
... KHR35H is a high-temperature heat resistant alloy with a molybdenum addition to increase creep and rupture strength to levels better than those of HP alloy. Typical applications are in heat treatment equipment. This datasheet provides information on composition, physical properties, and tensile...
Journal Articles
Alloy Digest (2007) 56 (10): SS-998.
Published: 01 October 2007
... 2(a) Creep Rupture Properties Rupture Stress Rupture stress, average (minimum) Temperature 1000 h 10,000 h 100,000 h °C °F MPa ksi MPa ksi MPa ksi 760 1400 82 (65) 11.9 (9.39) 60 (48) 8.75 (6.96) 42 (33) 6.11 (4.84) 815 1500 60 (48) 8.75 (6.97) 42 (33) 6.04 (4.84) 28 (22) 4.12 (3.20) 871 1600 43 (34...
Journal Articles
Alloy Digest (2008) 57 (1): Ni-658.
Published: 01 January 2008
... resistance than HW (See Alloy Digest Ni-655). The alloy is suitable for service up to approximately 1165 °C (2125 °F). Mechanical Properties: Mechanical properties at room temperature and elevated temperatures, and creep rupture properties are shown in Tables 1 and 2. Weldability: The HX alloy has good...
Journal Articles
Alloy Digest (2002) 51 (7): Ni-586.
Published: 01 July 2002
... RA602CA has a high creep rupture strength with alloying additions of titanium, zirconium, and high carbon. High chromium combined with aluminum and yttrium give the alloy a tight oxide scale and good cyclic oxidation behavior. This datasheet provides information on composition, physical properties...
Journal Articles
Alloy Digest (2007) 56 (11): Ni-655.
Published: 01 November 2007
...-655. Producer or source: Kubota Metal Corporation, Fahramet Division. Producer or Source: Kubota Metal Corporation, Fahramet Division Copyright © ASM International® 2007 2007 ASM International castability chemical composition corrosion-resistant alloys creep properties creep rupture...
Journal Articles
Alloy Digest (2012) 61 (3): SS-1116.
Published: 01 March 2012
... 870 ºC (70 1600 ºF) 18.0 (10.0) 20 980 ºC (70 1800 ºF) 18.5 (10.3) 20 1095 ºC (70 2000 ºF) 19.1 (10.6) Magnetic permeability 70 (ferromagnetic ) Mechanical Properties: Typical mechanical properties as well as creep-rupture properties can be found in Tables 1 and 2. Weldability: HP alloy has good...
Journal Articles
Alloy Digest (2006) 55 (11): SS-980.
Published: 01 November 2006
... 1900 23.0 3.33 11.2 1.63 4.00 0.58 1093 2000 14.5 2.1 5.2 0.75 1149 2100 7.6 1.1 1204 2200 3.4 0.5 Long-term creep rupture properties were extrapolated from Larson-Miller Parameter versus stress plots.Creep rupture stresses are subject to periodic revisions as the results from long...
Journal Articles
Alloy Digest (2001) 50 (6): Ni-567.
Published: 01 June 2001
... with high silicon to enhance this property. The alloy is also produced in a high silicon grade, KHR35H HiSi, for service in carburizing atmo- spheres. The alloy is suitable for long term service at temperatures up to 1093 °C (2000 °F). Table 2 Creep-Rupture Properties Rupture stress 100 h 1,000 h 10,000 h...
Journal Articles
Alloy Digest (2014) 63 (6): SS-1175.
Published: 01 June 2014
... (25.3) 400 °C (752 °F) 167.1 (24.2) Mechanical Properties: See Fig. 1 3 for creep rupture properties, the effect of alloying elements on creep rupture, and the change in Charpy value after ageing, respectively. Weldability: See the results of Varestraint Test in Fig. 4. Corrosion Resistance...
Journal Articles
Alloy Digest (2010) 59 (5): SS-1065.
Published: 01 May 2010
...) 13.3 (7.4) 649 982 ºC (1200 1800 ºF) 15.7 (8.7) 649 1093 ºC (1200 2000 ºF) 16.7 (9.3) Magnetic permeability ferromagnetic Mechanical Properties: Typical mechanical properties as well as creep rupture properties can be found in Tables 1 and 2. Weldability: HC alloy can be welded by the SMAW and GTAW...
Journal Articles
Alloy Digest (2012) 61 (2): SS-1115.
Published: 01 February 2012
... (15.9) Thermal expansion, 10-6/K (10-6/ºF) 21 538 ºC (70 1000 ºF) 17.8 (9.9) 21 649 ºC (70 1200ºF) 18.2 (10.1) 21 871 ºC (70 1600 ºF) 18.9 (10.5) Magnetic permeability (borderline ferromagnetic) 1.00 Mechanical Properties: Typical mechanical properties as well as creep-rupture properties can be found...