Search Results for corrosivity

Assab 2083 is a 13.5% chromium corrosion resistant mold steel that is characterized by high wear resistance and good polishability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: TS-822. Producer or source: Assab Group.

INCONEL ALLOY 686 has a higher Cr + Mo + W content than the current generation of corrosion-resistant nickel-base alloys and exhibits improved corrosion resistance over them. The alloy could be used in reducing mineral acids and FGD equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance, and corrosion resistance. Filing Code: Ni-421. Producer or source: Inco Alloys International Inc.

DELORO N-6 PM is a nickel-base alloy recommended for handling conditions of wear, erosion, heat and corrosion when impact is also a consideration. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as machining and joining. Filing Code: Ni-422. Producer or source: Deloro Stellite Inc.

STELLITE 98M2 PM is a cobalt-base alloy (18.5 wt% W) recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: CO-88. Producer or source: Deloro Stellite Inc.

STELLITE 3 PM (UNS R30103) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: CO-90. Producer or source: Deloro Stellite Inc.

ESCOLOY 45D is a duplex stainless steel casting with a combination of high strength, toughness and corrosion resistance. Pumps or valves handling sea water is one application area. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as casting and joining. Filing Code: SS-541. Producer or source: ESCO Corporation.

DELORO 208 PM is a nickel-base alloy recommended for handling conditions of wear, erosion, heat and corrosion when impact is also a consideration. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on wear resistance as well as machining and joining. Filing Code: Ni-424. Producer or source: Deloro Stellite Inc.

STELLITE 6 PM (UNS R30106) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: CO-91. Producer or source: Deloro Stellite Inc.

WAUKESHA ALLOY 54C is a nickel-base casting alloy having high resistance to corrosion, superior resistance to galling or seizing in metal-to-metal application, and good castability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as machining. Filing Code: Ni-426. Producer or source: Waukesha Foundry Company.

NICROFER 3127 hMo, often called Alloy 31, is an austenitic alloy with excellent corrosion resistance to neutral, acidic chloride and oxidizing acidic chlorides, along with having a high pitting index. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-427. Producer or source: VDM Technologies Corporation.

DELORO 711 PM is a nickel-base alloy recommended for handling conditions of wear, erosion, heat and corrosion when impact is also a consideration. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance as well as machining and joining. Filing Code: Ni-431. Producer or source: Deloro Stellite Inc.

Hastelloy Alloy G-30 filler metal is used as matching composition filler metal for fabrication of Hastelloy G-30 wrought and cast products and as filler metal for fabrication of G/G-3 alloy wrought products. It is also used for weld repair of high chromium castings and for weld overlay cladding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-432. Producer or source: Haynes International Inc.

NICROFER 5923 hMo, often called Alloy 59, was developed with extra low carbon and silicon contents and with a high alloy level of molybdenum to optimize its corrosion resistance. Nicrofer 5923hMo has a face-centered cubic structure. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-430. Producer or source: VDM Technologies Corporation.

For demanding applications in industry, alloys have been custom crafted by powder metallurgy as systems for wear or wear/corrosion resistance. CPM 10V and 9V tool steels provide excellent wear resistance, and CPM 440 V, MPL-1, and CPM-M4 are used when superior corrosion resistance and excellent wear resistance are required This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance. Filing Code: TS-517. Producer or source: Crucible Materials Corporation.

CRONIFER 2418 MoN AND 2419 MoN are austenitic stainless steels with an excellent combination of corrosion resistance and very high strength. A special grade of 2418 MoN meets UNS S34565. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-546. Producer or source: VDM Technologies Corporation.

STELLITE 31 PM is a cobalt-base alloy with 7.5 wt% W recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, joining, and powder metal forms. Filing Code: CO-92. Producer or source: Deloro Stellite Inc.

Alloy C-22 is a nickel-chromium-molybdenum alloy that has outstanding resistance to pitting, crevice corrosion and stress-corrosion cracking. The alloy also has excellent resistance to both reducing and oxidizing media. The alloy has good mechanical properties at both room and elevated temperatures. It can be hot upset, forged, deep drawn, impact extruded and welded. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness. It also includes information on joining. Filing Code: Ni-437. Producer or source: Haynes International Inc.

DELORO 716 PM is a nickel-base alloy recommended for handling conditions of wear, erosion, heat and corrosion when impact is also a consideration. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance and wear resistance as well as machining and joining. Filing Code: Ni-435. Producer or source: Deloro Stellite Inc.

STELLITE STAR J-METAL PM (UNS R30102) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, joining, and powder metal forms. Filing Code: CO-93. Producer or source: Deloro Stellite Inc.

P/M N690 exhibits isotropic mechanical properties and excellent corrosion resistance. Its high chromium content provides superior resistance to IGSCC. This alloy has superb weldability characteristics as well as minimal mechanical property degradation during extended exposure to elevated temperatures. This datasheet provides information on composition, microstructuretensile properties. It also includes information on corrosion resistance. Filing Code: Ni-439. Producer or source: Crucible Compaction Metals.