LUKENS 80 is a heat treated low carbon, high manganese constructional steel with a minimum yield strength of 80,000 psi. It is recommended for heavy construction equipment. It has satisfactory toughness down to -250 F and good weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-25. Producer or source: Lukens Steel Company.

USS Dual Phase 80 is a high-strength steel sheet which has a dual phase structure of martensite and ferrite. It provides all the benefits of higher strength with little sacrifice in ductility, formability or weldability. Dual Phase 80 gains strength as it is formed through rapid work hardening of its unique microstructure; in fact, it increases from its delivered yield strength of 50,000 psi up to 80,000 psi (or more) in forming. Its final strength depends on the amount of forming. Its many applications include automotive vehicles, farm equipment and heavy construction equipment. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-352. Producer or source: United States Steel Corporation.

ZYMAXX provides outstanding compressive creep resistance, toughness and chemical inertness at high temperatures and pressures and under adverse conditions. They have a wide range of uses beyond chemical processing, including aerospace and automotive applications, general industrial equipment, home appliances, farm and construction equipment. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on corrosion resistance. Filing Code: Cp-18. Producer or source: E. I. Dupont de Nemours & Company Inc..

ARMCO GAINEX Steels comprise a family of five low-cost structural carbon steels. This family includes: GAINEX-35, GAINEX-40, GAINEX-45, GAINEX-50 and GAINEX SA (Strain ageable); the numbers following GAINEX refer to minimum specified (ordered) yield strengths in 1000 psi. These steels are well suited to the automotive, farm and construction equipment, and appliance industries for such applications as truck bodies, light poles, bumper support members and parts for agricultural implements. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-69. Producer or source: Armco Inc., Eastern Steel Division.

Oregon Formalloy 400 (0.17C-1.50Mn maximum)combines through hardness and toughness with superior flame cutting, forming, and welding characteristics not found in typical abrasion resistant (AR) steels. This user-friendly grade permits more latitude in design and fabrication for such uses as dump bodies, bucket components, and mining and construction equipment. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: SA-486. Producer or source: Oregon Steel Mills.

Oregon Formalloy 500 (0.30C-1.15Mn maximum)combines through hardness and toughness with superior flame cutting, forming, and welding characteristics not found in typical abrasion-resistant (AR) steels. The user-friendly grade permits more latitude in design and fabrication for such uses as dump bodies, bucket components, and mining and construction equipment. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: SA-487. Producer or source: Oregon Steel Mills.

Unimach No. 1 is a 5% chromium hot work steel recommended for construction equipment operating in the temperature range of 400-1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-115. Producer or source: Cyclops Corporation.

FORA 500 is a wear resistant steel corresponding in hardness HB minimum to its title. This water-quenched martensitic steel is used in construction equipment. This datasheet provides information on composition, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-628. Producer or source: Industeel Belgium.

IN-787 is an age-hardenable, high-strength structural steel. It is characterized by low-temperature toughness, good atmospheric corrosion resistance and excellent weldability, even under adverse field conditions such as line-pipe welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-286. Producer or source: International Nickel Company Inc..

Bethlehem RQ-100A is a roller-quenched and tempered constructional alloy steel for applications such as bridges, buildings, derricks, mining equipment, earth moving equipment, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-221. Producer or source: Bethlehem Steel Corporation. See also Alloy Digest SA-272, March 1972.

Docol 450 Wear is an ultra-high strength steel that is used for many wear application in transportation and construction products. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength. It also includes information on wear resistance as well as joining. Filing Code: SA-546. Producer or source: SSAB Swedish Steel Inc.

OSM Weldalloy Alloys are quenched and tempered structural steel plates that allow increased thickness to ASTM A656 or greater strength designs to the 100,000 psi minimum yield strength of ASTM A514. This datasheet provides information on composition and tensile properties. It also includes information on forming. Filing Code: SA-485. Producer or source: Oregon Steel Mills.

ARMCO FORMABLE 50 HR is a hot-rolled high-strength low-alloy steel that provides excellent ductility, weldability and edge-tear resistance at a minimum yield strength of 50,000 psi (345 MPa). It has unusually good fabricating properties that are the result of closely controlled processing of a fully killed, low-carbon, vacuum-degassed, columbium-alloyed steel. This special composition and processing practice minimize harmful nonmetallic inclusions that hamper formability. Typical applications include automotive, construction and farm-equipment components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-356. Producer or source: Armco Inc., Eastern Steel Division.

CABOT ESR 4330 Mod is a modified 4330 alloy steel produced by electric-furnace, melting, vacuum degassing and electroslag remelting (ESR) by use of small-heat-size technology. Electroslag refining improves cleanliness and lowers the sulfur content to provide improved isotropy, ductility and toughness. This steel is ideally suited for many critical applications in oil-field and power-generating equipment as well as for machinery in the metalworking, chemical-process and construction fields. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-364. Producer or source: Cabot Corporation, Machinery Division.

The 21/4% Nickel Steel possesses a combination of moderate strength and superior resistance to brittle fracture at subzero temperatures. It is one of the most economical materials for the construction of equipment to operate at temperatures as low as -90 F. It is intended primarily for welded pressure vessels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-378. Producer or source: Alloy steel mills and foundries.

INGERSOLL-RAND OILFIELD PRODUCTS ESR 4330 MOD is a modified 4330 alloy steel produced by electric-furnace melting, vacuum degassing and electroslag remelting with the use of small-heat-size technology. Electroslag refining improves cleanliness and lowers the sulfur content to provide improved isotropy, ductility and toughness. This steel is ideally suited for many critical applications in oil-field and power-generating equipment as well as for machinery in the metalworking, chemical-process and construction fields. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-388. Producer or source: Ingersoll-Rand Oilfield Products Company.

ALLOY STEEL 21/4 Ni possesses a combination of moderate strength and superior resistance to brittle fracture at subzero temperatures. It is one of the most economical materials for the construction of equipment to operate at temperatures as low as 90 F. It is intended primarily for welded pressure vessels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-414. Producer or source: Alloy steel mills and foundries.

ASTM A 533 Grade B is a manganese-molybdenum-nickel alloy steel for use in the quenched-and-tempered condition for plate for the construction of pressure vessels and other pressure equipment. It is used in 6 to 12-inch sections and is the most widely used steel for nuclear reactor pressure vessels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-328. Producer or source: Alloy steel mills and foundries.

RA-600 is a nickel-base chromium alloy having good oxidation resistance to 2150 F, and good resistance to carburizing and nitriding atmospheres. It is recommended for furnace construction and equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-120. Producer or source: Rolled Alloys Inc..

JLX-50CC is a high-strength columbium steel designed for ease of fabrication. It has good formability, weldability, and toughness. It is recommended for mining equipment, automobile and truck bodies, trailers and similar construction. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-226. Producer or source: Jones & Laughlin Steel Corporation.