Search Results for consistent properties

Allvac 718Plus alloy is a variant of alloy 718 (Alloy Digest Ni-90, April 1964) made by adding new elements and adjusting others. The triple melting produces a stronger alloy with consistent properties in strength, stability, and forgeability. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-647. Producer or source: Allvac, an Allegheny Technologies Company.

Aminox AS-1 is an austenitic stainless steel with a very controlled composition to have consistent properties and machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: SS-1045. Producer or source: Advanced Metals International.

RENE' 95 Alloy has strengths significantly higher than those of any other commercially available alloy at temperatures between 700 and 1200 F. Its high strengths are the result of a closely interwoven development of composition and forging process; therefore, the alloy is highly dependent on careful control of production processes to achieve high and consistent properties. Its primary usage is in gas turbine compressor and turbine components. This datasheet provides information on composition, physical properties, microstructure, and elasticity as well as fracture toughness, creep, and fatigue. It also includes information on forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-203. Producer or source: Licensees of General Electric Company.

Domex 100XF is a very-high-strength steel that can be cold formed. It finds use in the construction and mining industries. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: SA-523. Producer or source: SSAB Swedish Steel Inc.

ATI 17 Ti-5Al-2Sn-2Zr-4Cr-4Mo is also known as Ti-17. It was developed by General Electric for fan and compressor discs. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-150. Producer or source: Allvac, An Allegheny Technologies Company.

Allvac Ti-17 is a high-strength deep-hardening alloy. The alloy is alpha-beta, but beta-rich, and can be worked in both the beta and alpha-beta region. The alloy is commonly referred to as grade 17 in specifications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as joining. Filing Code: TI-135. Producer or source: Allvac, An Allegheny Technologies Company.

ATI Ti-5Al-2Sn-2Zr-4Cr-4Mo is known as Ti-17 alloy and is a beta-rich material for large aerospace components. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-149. Producer or source: ATI Allvac.

BLENDALLOY 25-5000 is a nickel-iron alloy with a rectangular hysteresis loop and low coercive force. It is a powder metallurgy product and this helps to provide it with uniform and consistent magnetic properties, exceptional purity and cleanliness, precise chemcial composition and guaranteed reproducibility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-188. Producer or source: Spang Industries Inc..

GLIDCOP is a powder-metallurgy product consisting of high-purity copper with submicroscopic particles of insoluble aluminum oxide finely dispersed throughout the copper matrix. It is particularly suited for applications that require a combination of high strength and high conductivity. These properties are retained after exposure to and at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-270. Producer or source: Glidden-Durkee Division.

Allvac Titanium 6Al-4V ELI is an alloy with extra-low interstitials to produce cleanliness and consistency in properties. It is used in surgical instruments and implants. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TI-137. Producer or source: Allvac, an Allegheny Technologies Company.

BISBO is a pearlitic malleable iron readily cast in thick sections with consistently high mechanical properties. It has high yield strength, excellent wear resistance, and adaptability to selective hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on heat treating, machining, and joining. Filing Code: CI-17. Producer or source: Central Foundry Division, General Motors Corporation.

BRUSH PHOSPHOR BRONZE is precision rolled and thermally treated to produce a material with consistent formability and properties. The product offers design advantages, improved service life and reduced fabrication problems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-516. Producer or source: Brush Wellman Inc..

CARPENTER STAINLESS TYPE 430F SOLENOID QUALITY offers much of the properties of 430 stainless steel, but through composition and processing maintains consistently high magnetic permeability and low residual induction. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-561. Producer or source: Carpenter.

NAK 55 is a very clean steel for use in plastic and rubber molds were impact resistance is not critical in design. Its age-hardening gives very high strength and good wear resistance. Tight tolerance are obtained with consistent expansion and contraction properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: SA-481. Producer or source: International Mold Steels.

Deloro Stellite 21 (UNS R30021), previously known as Stellite 8, is similar to the medical implant alloy ASTM F75. It is a Co-Cr- Mo-Ni alloy that was developed in the mid-1930s as a corrosion resistant alloy, and rapidly found application as a biocompatible hip implant and denture alloy. This alloy consists of a CoCrMo alloy matrix containing dispersed hard carbides that strengthen the alloy and increase its hardness, but that also decrease its ductility. The type, shape, size, and distribution of the carbides are strongly influenced by the processing history of the alloy, and for this reason, the mechanical properties of Deloro Stellite 21 depend greatly on the manufacturing route and any subsequent heat treatments. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on corrosion resistance as well as machining. Filing Code: Co-139. Producer or source: Deloro Wear Solutions GmbH.

Dura-Bar 60-40-18 is a ductile iron that is used for the production of continuous cast products. Its microstructure consists of nodular graphite in a fully ferritic matrix. Dura-Bar 60-40-18 is typically used for applications requiring excellent ductility and impact strength. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-86. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar 65-45-12X is a ductile iron that is used for the production of continuous cast products. Its microstructure consists of nodular graphite and a matrix comprising ferrite and 10–50% pearlite. The predominantly ferritic matrix of Dura-Bar 65-45-12X allows it to be easily machined as opposed to steels and pearlitic irons. Dura-Bar 65-45-12X is a suitable alternative to low and medium carbon non-alloy steels. It is appropriate for applications necessitating fatigue strength and ductility. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-88. Producer or source: Charter Dura-Bar, Inc.

SANDVIK 3RE60 is an extra-low-carbon stainless steel with a duplex structure consisting of ferrite and austenite. It has high resistance to stress-corrosion cracking, good formability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-276. Producer or source: Sandvik.

AMAX-XLP is an oxygen-free low-phosphorus copper identical in electrical conductivity to that specified for deoxidized low-phosphorus (DLP) copper, but with a lower phosphorus range than that required in DLP copper. AMAX-XLP is produced from high-purity oxygen-free copper; this results in predictable effective phosphorus content and thus predictable consistent performance. It is ideal for applications where a low phosphorus content is beneficial and good conductivity and good resistance to embrittlement are needed. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-272. Producer or source: Amax Copper Inc..

CARPENTER STAINLESS No. 7-Mo is a two-phase alloy consisting of a ferritic matrix with pools of austenite. It has high resistance to stress-corrosion cracking and pitting, and good general corrosion resistance in many environments. Its principal use is for tubing and pipe in heat exchangers involving corrosive conditions. It is normally used in the annealed condition for maximum corrosion resistance and ductility. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-298. Producer or source: Carpenter.