MAGNIFER 50 is a soft magnetic iron-nickel alloy containing about 48% nickel. It has a saturation induction of 1.55T and a high permeability. It exhibits the highest saturation induction obtainable with iron-nickel alloys. Typical applications are (1) Low-frequency power transducers, (2) Chokes (Coils), (3) Relay parts and (4) Integrating current transformers for Fi-protective switches. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-70. Producer or source: VDM Technologies Corporation.

RMI Beta C is a heat-treatable titanium-base alloy that develops a tensile strength of over 200,000 psi in the solution-treated-and-aged condition. It has good ductility and toughness, good fabricability and a low elastic modulus. It has good resistance to general corrosion and it resists hot, aggressive environments containing ferric chloride, sodium chloride, carbon dioxide and hydrogen sulfide. Its applications include coil springs, fasteners, rivets and downhole oil-production equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-87. Producer or source: RMI Company.

Armco Tran-Cor H-1 Electrical Steel, available in coils 0.011 in. (0.28 mm) thickness, offers an outstanding degree of grain orientation with resultant far lower core loss than possible with conventional grain-oriented electrical steels. It is used for transformer cores. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and surface treatment. Filing Code: Fe-93. Producer or source: Armco Advanced Materials Company.

Armco Tran-Cor H-0 Electrical Steel, available in coils 0.009 (0.23 mm) thickness, offers an outstanding degree of grain orientation with resultant far lower core loss than possible with conventional grain-oriented electrical steels. It is used for transformer cores. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and surface treatment. Filing Code: Fe-92. Producer or source: Armco Advanced Materials Corporation.

PARALLOY H39WM is an austenitic alloy developed for severe service in furnace coils up to 1135 C (2075 F). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance as well as casting and joining. Filing Code: SS-594. Producer or source: Paralloy Ltd.

Inland DuraSpring is a high-strength microalloyed spring steel for use in high stress coil springs for automobile and light truck suspension systems. This bar product offers significant improvements in tensile strength, fatigue properties, and fracture toughness compared to conventional spring steels. This datasheet provides information on composition, hardness, and tensile properties as well asfracture toughness and fatigue. Filing Code: SA-496. Producer or source: Ispat Inland Inc.

Kubota alloy KHR35C is similar to HP alloy with the addition of niobium to increase its creep-rupture strength. Typical applications include components and assemblies for severe carburizing environments, such as ethylene pyrolysis coils. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: SS-753. Producer or source: Kubota Metal Corporation.

KHR 35CT HiSi is a modification of KHR 35C HiSi (see Alloy Digest SS-753, July 1999, and SS-755, August 1999) by the addition of both silicon and titanium as the microalloying additions. The strength, oxidation resistance, and metal dusting resistance improve its use for ethylene pyrolysis coils. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on casting. Filing Code: SS-767. Producer or source: Kubota Metal Corporation.

KHR35H-HiSi is an improvement over HP alloy in oxidation resistance and creep strength. This composition also has high silicon for resisting carburizing environments in ethylene pyrolysis coils. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance. Filing Code: Ni-567. Producer or source: Kubota Metal Corporation.

Kaiser aluminum alloy 2124 is a high-purity version of 2024 with tighter controls on the iron and silicon for an increase in strength and toughness. It is primarily used as plate in the aircraft industry. This data sheet applies to sheet, coil, and plate in the T851 temper. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: AL-413. Producer or source: Tennalum, A Division of Kaiser Aluminum.

ALZ 409 is a ferritic stainless steel with approximately 11% chromium. It has an oxidation and corrosion resistance that is much better than that of mild steel. ALZ 409 has a good combination of formability and weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: SS-827. Producer or source: ALZ nv.

Cronifer 40B is a high temperature alloy with excellent oxidation resistance at high temperatures. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-1101. Producer or source: ThyssenKrupp VDM USA Inc..

MAGNESIL-N is a non-oriented silicon-iron alloy of exceptional magnetic qualities designed for applications involving frequencies of 400 Hertz and higher. It has good permeability in all directions of the rolling plane, and is designed for either punched or sheared laminations with random flux disposition. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming and heat treating. Filing Code: Fe-53. Producer or source: Spang Industries Inc..

MAGNESIL-O is an oriented silicon-iron alloy of exceptional magnetic qualities designed for applications involving frequencies of 400 Hertz and higher. It has pronounced directional magnetic properties in the direction of rolling. It is recommended for wound cores and stacked laminations which are sheared so that the magnetic flux is mainly in the direction of the strip length. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming and heat treating. Filing Code: Fe-54. Producer or source: Spang Industries Inc..

TECHALLOY C (62-16) is a nickel-chromium-iron electrical resistance alloy for operating temperatures up to 1700 F. It can withstand high overloads; this makes it ideal for heavy-duty rheostats and controls. It is highly suitable for heating elements in domestic appliances. It's high electrical resistance and high strength in small sizes make it very useful where space is a factor. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-219. Producer or source: Techalloy Company Inc..

Sandvik 9RU10 is a precipitation hardening stainless steel with the highest relaxation resistance of all of the Sandvik wire grades. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on forming and heat treating. Filing Code: SS-1248. Producer or source: Sandvik Steel Company. Originally published July 2016, revised September 2016.

Sandvik 12R10L is fully austenitic with a very low cobalt content for nuclear applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength as well as fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: SS-1309. Producer or source: Sandvik Steel Company and Sandvik AB.

Strenx 600MC is a hot-rolled, structural steel made for cold forming, with minimum yield strength of 600 MPa (87 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S600MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-756. Producer or source: SSAB Swedish Steel Inc..

Phytherm 55 is a 30 nickel balance iron alloy, and Phytherm 120 is a 30Ni-3Cu-2Cr-balance iron alloy. Both are soft magnetic alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming. Filing Code: Fe-165. Producer or source: Aperam Alloys Imphy.

Strenx 700 MC PLUS is a hot-rolled structural steel made for cold forming, with minimum yield strength of 700 MPa (102 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S700MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on surface qualities. Filing Code: SA-817. Producer or source: SSAB Swedish Steel Inc..