MAGIVAL MG2 is a free machining ferritic stainless steel grade with the same high machinability and corrosion resistance as type 430F, but offering a higher magnetic permeability and lower coercive force than MG1 (Alloy Digest SS-1159, October 2013). Magival is a group of easily workable ferritic stainless steels developed for magnetic applications where high permeability and low coercive force are required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1161. Producer or source: Valbruna Stainless Steel.

Ancorsteel phosphorus alloys are ferrous base powders for PM parts requiring superior electromagnetic performance. Compared with parts made from pure, high compressibility iron powders, those made from the phosphorus alloys have higher resistivity, permeability and induction, and reduced coercive force. The presence of phosphorus also decreases the susceptibility of a PM component to nitrogen aging. These alloys are produced by making ferrophosphorus additions to the highly compressible iron powders Ancorsteel 1000B or Ancorsteel 1000C. This datasheet provides information on physical properties, and tensile properties. It also includes information on powder metal forms. Filing Code: CS-196. Producer or source: Hoeganaes Corporation.

Safeni 48 is a soft magnetic iron-nickel alloy with high relative permeability, low coercive field strength, and high saturation magnetization. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: Fe-160. Producer or source: Sandvik Steel Company.

Safeni 52 is a soft magnetic iron-nickel alloy with high magnetic permeability, low coercive force, a low content of nonmetallic inclusions, and thermal expansion properties that make it suitable for glass-sealing applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: Fe-161. Producer or source: Sandvik Steel Company.

MAGIVAL MG1 is the best known ferritic free machining stainless steel grade, developed for magnetic applications, and it has high machinability and corrosion resistance similar to type 430F. Magival steels are easily workable ferritic stainless steels developed for magnetic applications where high permeability and low coercive force are required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1159. Producer or source: Valbruna Stainless Steel.

MAGIVAL MG3 is a ferritic free machining stainless steel grade with similar magnetic properties to MG1 (Alloy Digest SS-1159, October 2013); it has better pitting corrosion resistance due to its molybdenum content, allowing applications in mild chloride corrosive environments. Magival is a group of easily workable ferritic stainless steels with a high degree of machinability developed for magnetic applications where high permeability and low coercive force are required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1164. Producer or source: Valbruna Stainless Steel.

MAGIVAL MG4 is a free machining ferritic stainless steel grade with the machinability and corrosion resistance as MG3 (Alloy Digest SS-1164, December 2013), and offering a higher magnetic permeability and lower coercive force than MG1 (Alloy Digest SS-1159, October 2013). Its higher silicon content allows it to reduce the eddy currents losses in components working in AC, and its molybdenum content allows applications in mild chloride corrosive environments. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1165. Producer or source: Valbruna Stainless Steel.

MAGNIFER 75 is a soft magnetic nickel-iron alloy containing about 5% copper and 2% chromium. It offers very high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound toroids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-294. Producer or source: Vereingte Deutsche Metallwerke AG.

MAGNIFER 7904 is a soft magnetic nickel-iron alloy containing about 5% molybdenum. It offers extremely high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound troids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-291. Producer or source: Vereingte Deutsche Metallwerke AG. Originally published September 1983, revised February 1984.

BLENDALLOY 25-5000 is a nickel-iron alloy with a rectangular hysteresis loop and low coercive force. It is a powder metallurgy product and this helps to provide it with uniform and consistent magnetic properties, exceptional purity and cleanliness, precise chemcial composition and guaranteed reproducibility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-188. Producer or source: Spang Industries Inc..

Cobalt magnet steels have high coercive force which makes it possible to maintain strong magnetic fields with relatively short magnets. These alloys must be hardened by drastic quenching in oil to obtain the maximum magnetic properties. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: SA-44. Producer or source: Alloy steel mills and foundries.

Hiperco 50A is an iron-cobalt-vanadium soft magnetic alloy possessing high magnetic saturation, high direct current (dc) maximum permeability, low dc coercive force, and low alternating current (ac) core loss. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: CO-107. Producer or source: Carpenter.

HS 50 alloy was developed to provide an increase of approximately 0.1 T (1000 G) in saturation magnetization compared with standard Permendur 49. The heat treatment of HS 50 can be carried out at a higher temperature, which gives increased permeability and lower coercive force. The mechanical properties are superior to those of Rotelloy 3. For applications where low loss is required, a thinner gage strip can be used to compensate for the lower resistivity compared with Rotelloy 3. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating and machining. Filing Code: FE-130. Producer or source: Carpenter Technology Corporation.

Allegheny Ludlum Moly Permalloy is a nickel-iron-molybdenum alloy having excellent permeability and core loss properties. It has high initial and maximum permeability, low coercive force, and low hysteresis loss. It is recommended for toroids, tape and lamination cores. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-144. Producer or source: Allegheny Ludlum Steel Corporation.

BLENDALLOY 25-7904 is an 80% nickel-15% iron-5% molybdenum alloy having very high permeability and low coercive force for magnetic cores in such applications as transformer laminations, sensitive magnetic amplifiers and magnetic shielding. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-181. Producer or source: Spang Industries Inc..

RAECO-15 is a magnet alloy of samarium and cobalt which offers 15-million energy product, an extremely high intrinsic coercive force (Hci = 15,000 Oe), and a Curie Temperature of 750 C. It is especially attractive for use in severe demagnetizing environments at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-67. Producer or source: Raytheon Microwave and Power Tube Division.

BLENDALLOY 25-8005 is a soft magnetic alloy for use in a variety of precise magnetic devices. It has high magnetic permeability, low coercive force, low hysteresis loss, exceptional purity and cleanliness, precise chemical composition, and good reproducibility in production heats. It is a powder-metallurgy product. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-186. Producer or source: Spang Industries Inc..

Duraperm is a soft magnetic alloy which exhibits high mechanical hardness and abrasion resistance in combination with a very low coercive force. It is recommended for applications requiring flux from minimum magnetization forces. This datasheet provides information on composition and physical properties. It also includes information on heat treating. Filing Code: Fe-28. Producer or source: Precision Metals Division, Hamilton Watch Company.

SIMONDS #81 is a cobalt, tungsten, chromium permanent magnet steel that is capable of developing moderately high coercive force along with high residual induction when it is in the hardened condition. Strong magnetic fields can be achieved with fairly short magnets and the configuration desired can be obtained with castings or by fabrication from rolled bars, sheets or plates. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-202. Producer or source: Simonds Steel Division, Simonds Saw & Steel Company.

Hiperco 50 is a cobalt-iron-vanadium soft magnetic alloy for high flux levels. It has high permeability at high inductions and low d-c coercive force. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming and heat treating. Filing Code: Co-50. Producer or source: Westinghouse Electric Corporation.