ZYMAXX provides outstanding compressive creep resistance, toughness and chemical inertness at high temperatures and pressures and under adverse conditions. They have a wide range of uses beyond chemical processing, including aerospace and automotive applications, general industrial equipment, home appliances, farm and construction equipment. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on corrosion resistance. Filing Code: Cp-18. Producer or source: E. I. Dupont de Nemours & Company Inc..

DERAKANE 510A improves the retention of chemical resistance and imparts a degree of ignition resistance to thermoset resins by elimination of additives. This permits the fabricated article to be inspected visually for flaws. This datasheet provides information on physical properties, hardness, and tensile properties. It also includes information on corrosion resistance. Filing Code: P-35. Producer or source: Dow Chemical USA, Dow Plastics Group.

Deloro Stellite 20 is a Co-Cr-W-C alloy. It is the most abrasion resistant standard cobalt based alloy. Its high chromium content ensures good general corrosion resistance and high-temperature oxidation resistance, while the increased tungsten level provides superior high-temperature properties as compared to Stellite 6 or 12. While it has low shock resistance, it is often the only answer for some applications such as slurry pumps or chemical resistant parts. It is typically used up to a temperature of about 600 °C (1110 °F), depending on the application. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on corrosion resistance. Filing Code: Co-135. Producer or source: Deloro Wear Solutions GmbH.

ULTEM 2100, 2200, 2300 and 2400 resins have high heat resistance, inherent flame resistance with low smoke evolution, broad chemical resistance and outstanding processability. Glass reinforcment provides increased rigidity and dimensional stability while maintaining good processing features. The ULTEM 2000 series is available in both low viscosity and mold release grades in addition to the standard grades. This datasheet provides information on physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. Filing Code: Cp-5. Producer or source: G. E. Plastics.

SUPEC G401 AND G402 are resins based on polyphenylene sulfide (PPS) technology. They combine long-and short-term heat resistance with broad chemical resistance and they are inherently flame retardant. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. Filing Code: P-3. Producer or source: G. E. Plastics.

ISOPLAST 201 is an opaque, impact modified thermoplastic polyurethane engineering resin for extrusion and injection molding. Its high heat distortion temperature sets it apart from ISOPLAST 101(described in Alloy Digest P-10, October 1989). It has high notched impact strength, excellent chemical and solvent resistance and high abrasion resistance. This datasheet provides information on physical properties, hardness, and tensile properties as well as fracture toughness. Filing Code: P-14. Producer or source: The Dow Chemical Company, Dow Plastics.

ISOPLAST 101, unreinforced, is a rigid, amorphous polyurethane thermoplastic polymer. It is opaque and impact modified. It is injection moldable and extrudable. It is characterized by its high impact strength, high abrasion resistance, excellent chemical and solvent resistance and low moisture sensitivity. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on wear resistance. Filing Code: P-10. Producer or source: The Dow Chemical Company.

The importance of hydrochloric and sulfuric acids to the chemical process industries cannot be overstated. There has always been a desire for materials with improved resistance to these two acids, without the drawbacks associated with the nickel-molybdenum alloys. The Hybrid-BC1 alloy is significantly more resistant to HCl and H2SO4 than the Ni-Cr-Mo alloys and additionally, is resistant to oxidizing chemicals in the acid that are very detrimental to B-Family alloys. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-679. Producer or source: Haynes International Inc.

DERAKANE 8084 expands the serviceability of thermoset resins in traditional fiber-reinforced plastic applications. The inherent toughness of the epoxy resin has been enhanced with a reactive elastomer. This datasheet provides information on physical properties, hardness, and tensile properties. It also includes information on corrosion resistance. Filing Code: P-31. Producer or source: The Dow Chemical Company, Dow Plastics.

ULTRA 76 TANTALUM alloys have been used in various process industry applications requiring resistance to aggressive, hazardous chemicals. These tantalum alloys provide cost-effective, long service-life for critical components in severe (corrosive) environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: TA-13. Producer or source: H.C. Starck Inc.

DERAKANE 411-45 is a medium viscosity resin primarily used for transfer molding, centrifugal casting, filament winding and other applications requiring extremely fast wet out. This datasheet provides information on physical properties, hardness, and tensile properties. It also includes information on corrosion resistance. Filing Code: P-29. Producer or source: The Dow Chemical Company, Dow Plastics.

DERAKANE 470-36 and 470-45 resins combine corrosion resistance with superior retention of properties at high temperatures and oxidation resistance. They cure rapidly to give fast green strength and superior creep resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance. Filing Code: P-12. Producer or source: The Dow Chemical Company, Dow Plastics.

ENPLATE ELECTROLESS NICKEL is a high-nickel, low-phosphorus alloy deposited by chemical reduction without electric current. Such alloys are more corrosion resistant than electroplated nickel coatings. Furthermore, unlike electrolytic nickel, electroless nickel-phosphorus alloy deposits are essentially pore free and are of uniform thickness over the entire surface, even of complex and irregular shaped objects. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-340. Producer or source: Enthone Inc..

CALCARB is a rigid, high-temperature composite made from discontinuous lengths of carbon fibers, vacuum formed and bonded by a carbonized resin. It is a relatively strong, high-purity carbon material with low bulk density that is readily machinable. This datasheet provides information on composition, physical properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as machining and surface treatment. Filing Code: Cp-1. Producer or source: Calcarb Inc..

Carpenter Stainless 20Cb-3 is an austenitic stainless steel designed for improved resistance to sulfuric acid. It finds wide use in all phases of the chemical industry. It has good mechanical properties and comparative ease of fabrication. Columbium stabilizes the alloy to minimize carbide precipitation during welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-182. Producer or source: Carpenter.

Remanit 4404 is an 18 Cr-8 Ni + molybdenum type corrosion-resistant stainless steel that offers decreased carbide precipitation, and has good resistance to acids. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-698. Producer or source: Thyssen Stahl AG.

ULTEM 6100 and 6200 are glass reinforced and ULTEM 6202 is a mineral filled copolymer resin. For properties of the unreinforced resin, ULTEM 6000, see Alloy Digest P-27, June 1991. These are high temperature materials that are particularly suitable for military electrical components which must survive 200 C testing. This datasheet provides information on physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: Cp-16. Producer or source: G. E. Plastics.

Special Metals Inconel G-3 is a nickel-chromium-iron alloy with additions of molybdenum and copper. Some of the minor elements are controlled to yield increased resistance to heat affected-zone (HAZ) corrosion and improved weldability. Special Metals Inconel G-3 has excellent corrosion resistance to oxidizing chemicals and atmospheres. It is also resistant to reducing chemicals because of its nickel and copper contents. The nickel content also provides the alloy with exceptional stress-corrosion-cracking resistance in chloride-containing environments. The high molybdenum content provides very good resistance to pitting and crevice corrosion. The low carbon content helps prevent sensitization, giving the alloy resistance to intergranular corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-774. Producer or source: Special Metals Corporation.

USS 18-8 Mo (AISI Type 316) is an iron-chromium-nickel alloy with superior resistance to corrosion because of an addition of 2 to 3% molybdenum. It is formable and weldable. It has good creep strength and is very well suited for high-temperature applications that require relatively high strengths up to 1500 F. It resists corrosion from a wide variety of chemicals and is highly resistant to oxidation to 1650 F. Its numerous applications include pharmaceutical equipment, pulp and paper industry, dairy equipment, and chemical processing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-325. Producer or source: United States Steel Corporation.

HASTELLOY Alloy G is a nickel-base alloy recommended for tough environmental applications. It resists hot sulfuric and phosphoric acid service, and is also resistant to stress-corrosion cracking. This alloy is covered by U.S. Pat. No. 2,777,766. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-113. Producer or source: Union Carbide Corporation, Stellite Division.