SPS Technologies Aerex 350 is a proprietary high-strength, corrosion-resistant nickel-based superalloy that is suitable for demanding applications up to 730 °C (1350 °F). It has the highest temperature limit of the three SPS superalloys. Like MP35N and MP159, this alloy not only undergoes the multiphase reaction, but also benefits from two additional strengthening mechanisms. Elements are also added to the chemical composition to cause precipitation of the gamma prime phase with higher temperature capability than MP159. Because this alloy is used at even higher temperatures than MP159, elements are added to the chemical composition to also cause the precipitation of eta phase during thermal treatments. This phase contributes to notch toughness at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance. Filing Code: Ni-780. Producer or source: SPS Technologies, Inc.

ZIRCADYNE 706 is a zirconium-niobium (columbium) alloy containing 2-3% niobium. It is similar in chemical compositions (except for slightly lower oxygen) to Zircadyne 705 (Alloy Digest Zr-8, July 1982). Zircadyne 706 was developed specifically for severe forming applications such as panel-type heat exchangers. The corrosion resistance of Zircadyne 706 is identical to that of Zircadyne 705 but its tensile and yield strengths are slightly lower. It is recommended for chemical processing applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-10. Producer or source: Teledyne Wah Chang Albany.

NSSMC-NAR-AH-4 is an austenitic stainless steel with excellent oxidation resistance. The chemical composition can be identified as 23Cr-11Ni-N-REM-B. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming. Filing Code: SS-1241. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

ESCO Alloy 12M is a low alloy, medium carbon content, hard, shock and impact-resisting steel recommended for heavy duty cast parts. Minor chemical composition variations and heat treatment are employed in order to develop specific properties. This alloy possesses exceptional toughness at low temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting, heat treating, machining, and joining. Filing Code: SA-126. Producer or source: ESCO Corporation.

BLENDALLOY 25-8005 is a soft magnetic alloy for use in a variety of precise magnetic devices. It has high magnetic permeability, low coercive force, low hysteresis loss, exceptional purity and cleanliness, precise chemical composition, and good reproducibility in production heats. It is a powder-metallurgy product. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-186. Producer or source: Spang Industries Inc..

DYNA-LOY HS-32 is a cold-drawn high-strength alloy steel developed for those applications that require a minimum hardness of Rockwell C 32. Its chemical composition permits maximum machinability and improved surface finish at a guaranteed minimum tensile strength of 150,000 psi as supplied. Thus it needs no heat treatment and is suitable for a wide variety of engineering uses such as shafts, axles and machine-tool parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, joining, and surface treatment. Filing Code: SA-338. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

DYNA-LOY 41L43 is a cold-drawn alloy steel developed for those applications that require excellent machinability along with a hardness range of Rockwell C 33 to 55. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 150,000 to 280,000 psi. It is recommended for a wide range of uses such as gears, bushings and fasteners. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-341. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

DYNA-LOY 41L49 is a cold-drawn alloy steel recommended for those applications that require a hardness range of Rockwell C 43 to 56 and excellent machinability. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 175,000 to 300,000 psi. Its many uses include shafts, pipe reamers and special bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-342. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

UHB Stainless AEB-L is a hardenable (martensitic) stainless steel developed for the demanding requirements of razor blades. It is now finding wide use for other articles with cutting edges, such as knives and scissors. It has an ideal, closely controlled chemical composition and is supplied in a condition that provides good results in manufacturing operations. It gives a cutting tool with a first-class edge characterized by (1) High initial sharpness, (2) Lasting edge sharpness, (3) Good edge retention and wear resistance and (4) Good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-371. Producer or source: Uddeholm Aktiebolag.

UNILOY 13-8 has high strength, ductility and toughness in large cross sections in both longitudinal and transverse directions. The alloy has excellent mechanical property uniformity; this is the result of a well-balanced chemical composition. Because of its excellent general corrosion resistance (nearly equal to AISI Type 304 stainless steel) and its high degree of resistance to stress-corrosion cracking, it is used in a variety of environments. Typical uses are aircraft structural components, shafts, valve parts and fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-457. Producer or source: Cytemp Cyclops.

NICROFER 5520 Co is a nickel-chromium-cobalt-molybdenum alloy with excellent strength and creep properties up to high temperatures. Due to its balanced chemical composition the alloy shows outstanding resistance to high temperature corrosion in the form of oxidation and carburization. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-480. Producer or source: VDM Technologies Corporation.

Ancorloy 2 and Ancorloy 4 are binder-treated premixed powder materials. They meet the chemical composition limits for the MPIF Material Standard 35 for Material Designations FD-02XX and FD-04XX, respectively. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on powder metal forms. Filing Code: SA-671. Producer or source: Hoeganaes Corporation.

Böhler (or Boehler) W403 VMR is a tool steel with outstanding properties, based not only on a modified chemical composition, but on the selection of highly clean raw materials for melting, remelting under vacuum (VMF), optimized diffusion annealing, and a special heat treatment. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-721. Producer or source: Böhler Edelstahl GmbH.

Docol M are cold reduced fully martensitic steels. These steels are manufactured using special heat treatment in a continuous annealing line. The ultra high strength is produced by extremely fast water quenching from an elevated austenitic temperature range. Docol M grades are characterized by good formability at these high-strength levels combined with good weldability. All conventional welding methods can be used due to the lean chemical composition. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming. Filing Code: SA-687. Producer or source: SSAB Swedish Steel Inc..

DOCOL 1400 MZE is a cold reduced fully martensitic steel. Docol M steels are manufactured using special heat treatment in a continuous annealing line. The ultra high strength is produced by extremely fast water quenching from an elevated austenitic temperature range. Docol M grades are characterized by good formability at these high strength levels combined with good weldability. All conventional welding methods can be used due to the lean chemical composition. The ZE suffix in the title signifies that is electrogalvanized. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on forming and surface treatment. Filing Code: SA-689. Producer or source: SSAB Swedish Steel Inc..

Carpenter CTS 20HC is a version of type 420 martensitic stainless steel containing nominal 0.5% carbon content. The chemical composition and processing of CTS 20HC have been tailored to provide a uniform, fine carbide structure that can be considered for the manufacture of thin sections and fine blanking operations. This alloy can achieve a tempered hardness capability of HRC 55. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: SS-1188. Producer or source: Carpenter Specialty Alloys.

Patinax 355 is a weathering steel that due to its chemical composition, when utilized unprotected, exhibits resistance to atmospheric corrosion over unalloyed steels. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-803. Producer or source: ThyssenKrupp Steel Europe AG.

Patinax 355P is a weathering steel that due to its chemical composition, when utilized unprotected, exhibits resistance to atmospheric corrosion over unalloyed steels. Patinax 355P has increased phosphorus content for improved weather resistance compared with Patinax 355 (Alloy Digest SA-803, October 2017). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: SA-805. Producer or source: ThyssenKrupp Steel Europe AG.

Crucible P/M N625 is a powder metallurgical nickel-base alloy with excellent corrosion resistance, high strength, chemical homogeneity, and thermal stability. Applications include use for highly corrosive situations in the marine, nuclear power, pulp and paper, and chemical process industries. This datasheet provides information on composition, microstructuretensile properties. It also includes information on powder metal forms. Filing Code: Ni-555. Producer or source: Crucible Compaction Metals.

Incoloy Filler Metal 65 is used for gas tungsten arc welding of Incoloy alloy 825 (See Alloy Digest Ni-109, June 1988) and other Ni-Fe-Cr-Mo-Cu alloys of similar composition. The weld metal is highly corrosion resistant, particularly in reducing chemicals such as sulfuric and phosphoric acids. Incoloy Filler Metal 65 can also be used for depositing overlays on carbon and low-alloy steels. This datasheet provides information on composition and tensile properties. It also includes information on forming. Filing Code: Ni-659. Producer or source: Special Metals Welding Products Company.