Search Results for casting

DOMAL AZ91Z is a 9% Al, 1% Zn, magnesium die casting alloy. It combines good mechanical properties, casting characteristics and resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Mg-11. Producer or source: Dominion Magnesium Ltd.

BRUSH CASTING ALLOY 10C, a beryllium copper alloy, offers excellent thermal and electrical conductivity with moderate strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Cu-573. Producer or source: Brush Wellman Inc..

BRUSH CASTING ALLOY 3C is in the beryllium copper family, offering high thermal and electrical conductivity with moderate strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Cu-574. Producer or source: Brush Wellman Inc..

Alcoa EZCast-NHT A152 and A153 are proprietary, non-heat-treatable, high-pressure die casting (HPDC) aluminum alloys in which magnesium is the principal alloying element. These alloys develop the required strength and toughness in the as-cast condition, thus eliminating or minimizing numerous production problems, such as distortion, blistering, property variations, and heat treatment logistics. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties. It also includes information on corrosion resistance. Filing Code: Al-469. Producer or source: Alcoa Corporation.

Alcoa EverCast (C862F) is a proprietary, heat-treatable, Al-Zn-Mg-Cu casting alloy (7xx.x series) that also contains small amounts of vanadium and zirconium. Compared with conventional 3xx.x alloys, 7xx.x alloys eliminate brittle silicon particles thus allowing for the highest fatigue strength. The result is significantly higher tensile and fatigue strengths compared to the traditional A356 alloy with properties equal to or better than most 6xxx alloy forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting. Filing Code: Al-471. Producer or source: Alcoa Corporation.

Rio Tinto 355.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting, for the production of sand and permanent mold castings. It is a high-strength alloy with many desirable characteristics. The presence of copper in alloy 355.0 increases strength but reduces corrosion resistance and ductility. This alloy is less ductile than 356.0. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-486. Producer or source: Rio Tinto.

ILZRO 16 is a zinc-base die-casting alloy which was developed to have superior creep resistance at both ambient and elevated temperatures for processing in cold-chamber die-casting machines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-14. Producer or source: Zinc and zinc alloy suppliers.

ALUMINUM 354.0 is a permanent-mold casting alloy that responds to an age-hardening heat treatment. It has good strength, weldability and corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-204. Producer or source: Aluminum Company of America.

ELEKTRON ZE63A is a high-strength magnesium casting alloy having good foundry characteristics. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-71. Producer or source: Magnesium Elektron Inc..

VANASIL 77 is an age-hardenable hypereutectic aluminum-silicon casting alloy having a low coefficient of thermal expansion and excellent wear resistance. These factors, combined with excellent high-temperature strength make it an excellent material for applications where light weight is required in combination with excellent wear resistance, dimensional stability, and high strength. Permanent molding is required to control properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-208. Producer or source: Gould Inc., Clevite Engine Parts Division.

TENZALOY is an aluminum casting alloy developed for its high-strength and self-aging characteristics for castings that must have good dimensional stability and good corrosion resistance. Large and small intricate castings can be made without the danger of distortion associated with heat treatment. This alloy has such a high melting point that it can be brazed at temperatures up to 1100 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and surface treatment. Filing Code: Al-15. Producer or source: Federated Metals Corporation, ASARCO Inc.. Originally published April 1954, revised October 1973.

Federated F070.3 is a heat-treatable aluminum casting alloy recommended for high strength, good corrosion resistance, pressue-tight castings and intricate shapes. It is normally used only when heat-treated (aged) strengths are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-209. Producer or source: Federated Metals Corporation, ASARCO Inc..

FEDERATED F410 is a heat-treatable aluminum sand casting alloy recommended for uses requiring high strength along with toughness and ductility. It has good machinability, fair castability, and is suitable for a number of automotive and aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-210. Producer or source: Federated Metals Corporation, ASARCO Inc..

ALUMINUM 222.0 is an age-hardenable aluminum alloy for sand and permanent mold castings. It is hard and wear resistant and has good strength at elevated temperatures. Applications include cylinder heads and pistons. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-211. Producer or source: Various aluminum companies.

Nickel-Copper Alloys 410 and 411 are strong and ductile casting alloys; they are generally used in conjunction with wrought counterparts. They can be cast readily into fittings such as elbows, tees, return bends, flanges and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-214. Producer or source: Nickel alloy casting producers.

FEDERATED F450 is a heat-treatable sand and permanent-mold aluminum casting alloy with good casting characteristics and pressure tightness. It is recommended for general-purpose castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-213. Producer or source: Federated Metals Corporation, ASARCO Inc..

Nickel-Copper Alloys 505 and 506 are strong castings alloys. Both alloys combine high strength with good wear resistance. Alloy 505 (4% silicon) is employed where exceptional resistance to galling is needed. Alloy 506 (3% silicon) is recommended where good (but not exceptional) galling resistance is sufficient. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion and wear resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-215. Producer or source: Nickel alloy casting producers.

ALUMINUM B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-214. Producer or source: Various aluminum companies.

ALUMINUM 208.0 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-215. Producer or source: Various aluminum companies.

ALUMINUM A332.0 is an aluminum-silicon-nickel-copper-magnesuim alloy recommended for high-strength permanent-mold castings. The as-cast material can be aged to increase hardness and strength, or it can be solution treated and aged. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-216. Producer or source: Various aluminum companies.