Search Results for cast zirconium alloys

ASTM B 752 GRADE 702C is a zirconium casting alloy. Zirconium alloys are extremely corrosion resistant. They are expensive, but in some cases are superior in corrosion performance to stainless steels, nickel alloys, and titanium. The largest application for zirconium castings is handling hydrochloric acid. Grade 702C is one of the common casting grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: ZR-11. Producer or source: ATI Wah Chang, Allegheny Technologies.

ASTM B 752 Grade 705C zirconium casting alloy is basically identical in composition and similar in properties to its wrought equivalent, UNS R60705, which is grade 705. Zirconium alloys are expensive, but are more corrosion resistant than stainless steels, nickel alloys, and titanium. The largest application for zirconium alloys is in the handling of hydrochloric acid. Grade 705C is one of the common casting grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: ZR-12. Producer or source: ATI Wah Chang, Allegheny Technologies.

Rheinfelden Castasil-37 (AlSi9MnMoZr) is an aluminum-silicon-manganese-molybdenum-zirconium high pressure die casting (HPDC) alloy. It was developed by Rheinfelden Alloys GmbH for the production of large and complex high pressure die castings for automotive structural applications. This alloy is used in the as-cast condition, and exhibits good mechanical properties, especially elongation, which are superior to those of conventional aluminum-silicon alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, and joining. Filing Code: Al-481. Producer or source: Rheinfelden Alloys GmbH & Co. KG.

Alcoa EverCast (C862F) is a proprietary, heat-treatable, Al-Zn-Mg-Cu casting alloy (7xx.x series) that also contains small amounts of vanadium and zirconium. Compared with conventional 3xx.x alloys, 7xx.x alloys eliminate brittle silicon particles thus allowing for the highest fatigue strength. The result is significantly higher tensile and fatigue strengths compared to the traditional A356 alloy with properties equal to or better than most 6xxx alloy forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting. Filing Code: Al-471. Producer or source: Alcoa Corporation.

Magnesium QE-22A is a heat treatable magnesium-silver-zirconium rare earth casting alloy having very high yield strength at temperatures up to 500 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-54. Producer or source: Magnesium Elektron Ltd.

MAGNESIUM ZK51A is a zirconium type magnesium sand casting alloy recommended for applications requiring high yield strength and uniformity of properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-34. Producer or source: Aluminum Company of America.

Magnesium ZE41A is a magnesium-base casting alloy containing zinc, zirconium and rare earths. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear andbearing strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-48. Producer or source: The Dow Metal Products Company.

Electron QE22A (MSR) is a heat treatable magnesium-silver-zirconium-rare earths casting alloy having very high yield strength at temperatures from 0 to 500 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-69. Producer or source: Magnesium Elektron Inc..

DOWMETAL EZ33A is a magnesium-rare earth metal-zinc-zirconium alloy having good high temperature creep resistance up to about 500 F, and is recommended for applications at elevated temperatures. Its freedom from microporosity makes it a suitable casting alloy for producing very special complicated parts which might not be made pressure tight in an alloy such as Dowmetal C. It is used in the artificially aged condition (T5). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Mg-21. Producer or source: The Dow Chemical Company.

ECLIPSALOY 520 is a fine-grain magnesium sand casting alloy containing zinc and zirconium. It is recommended where high strength is required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Mg-50. Producer or source: Bendix Aviation Corporation.

MAGNESIUM HZ 32A is a magnesium-base alloy containing thorium, zirconium and zinc. It is recommended for elevated temperature applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-42. Producer or source: Dow Chemical Company, Magnesium Department.

Magnesium-HK31A is a magnesium-thotium-zirconium wrought alloy that can be hear treated for improved mechanical properties above 500 F. It has good high temperature creep resistance and is recommended for elevated temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Mg-64. Producer or source: Brooks & Perkins Inc..

Alcoa 351 SupraCast is a heat-treatable aluminum-silicon-copper alloy that also contains small amounts of magnesium, manganese, vanadium, and zirconium. It is designed for components exposed to elevated temperatures in high performance engines. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on heat treating, machining, and joining. Filing Code: Al-466. Producer or source: Alcoa Corporation.

MAGNESIUM EK30A is a rare-earth type magnesium sand casting alloy recommended for applications requiring good creep properties at 300 to 500 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Mg-35. Producer or source: Magnesium foundries.

MAGNESIUM EZ33A is a magnesium casting alloy recommended for use at elevated temperatures. It has good high temperature creep strength up to about 500 F. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Mg-65. Producer or source: The Dow Chemical Company, Metal Products Department.

DOWMETAL HK31XA is a magnesium-thorium-zirconium alloy having good high temperature creep resistance, and is recommended for applications at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on heat treating, machining, and joining. Filing Code: Mg-20. Producer or source: The Dow Chemical Company.

DOWMETAL EK30A is a magnesium-rare earth metal-zirconium alloy having good high temperature creep resistance up to about 500 deg. F., and is recommended for applications at elevated temperatures. It is used in the solution heat treated plus artificially aged condition (T6). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: Mg-23. Producer or source: The Dow Chemical Company.

Schmelzmetall Hovadur CCZ is a heat-treatable, copper-chromium-zirconium alloy. In the solution heat-treated and artificially aged condition, this alloy exhibits high thermal and electrical conductivity along with high strength and a high softening temperature. Hovadur CCZ evolved from CuCr1 (CW105C), a precipitation-hardenable alloy first made in the 1930s for spot welding electrodes, for which strength and hardness at temperatures up to 500 °C (930 °F), as well as good electrical and thermal conductivity, are essential. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-912. Producer or source: Schmelzmetall AG.

Magnesium ZH62A is a high strength casting alloy having acceptable castability and weldability. It has good fatigue properties and ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-40. Producer or source: Dow Chemical Company, Magnesium Products Department.

DOWMETAL HZ32XA is a magnesium-thorium-zinc-zirconium alloy having good high temperature creep resistance, and is recommended for applications at elevated temperatures. It is used in the artificially aged condition (T5). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Mg-26. Producer or source: The Dow Chemical Company.