CENTRI-CAST GRAY IRON 40 is a centrifugally cast gray iron with a nominal tensile strength of 40,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are automotive equipment, compressors, machine tools and general machinery applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-44. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 30 is a centrifugally cast gray iron with a nominal tensile strength of 30,000 psi. It is produced in the form of tubing which has a wide range of uses for applications where freedom from pattern cost is an important consideration and where size and shape are of paramount importance. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-46. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 55 is a centrifugally cast gray iron with a nominal tensile strength of 55,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are seals, bushings, farm machinery, casings and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-48. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 45 has a nominal tensile strength of 45,000 psi. It is gray iron cast centrifugally in the form of tubing which has a wide range of uses for applications where freedom form pattern cost is an important consideration and where size and shape are of paramount importance. Its many applications include automotive equipment, farm machinery, bushings and machine tools. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-50. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 50 is a centrifugally cast gray iron with a nominal tensile strength of 50,000 psi. It is cast in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Among its many applications are farm machinery, seals, bushings, machine tools and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-51. Producer or source: Federal Bronze Products Inc..

Dura-Bar 202 (Type 2) Ni-Resist Iron is a flake graphite austentic cast iron that is produced by the continuous casting process. It is suitable for most applications requiring Dura-Bar 201 (Type 1) Ni-Resist Iron, and the grades are often used interchangeably. The machinability of Dura-Bar 202 (Type 2) Ni-Resist Iron will be similar to the pearlitic grades of gray iron, namely G2 and G2A. It is especially suitable for service temperatures above 705°C (1300°F) and in the stem handleing applications. Copper levels are maximized at 0.50%, and this grade is suitable for food grade applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: CI-100. Producer or source: Dura-Bar Metal Services.

ACO Eurobar EN-GJL-150C (5.1102) is a low-tensile-strength gray cast iron that is produced by the continuous casting process. It is useful in situations where very high thermal conductivity, machinability, and damping capacity are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: CI-89. Producer or source: ACO Eurobar GmbH.

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

Dura-Bar 201 Type 1 is a flake graphite austenitic cast iron that is produced by the continuous casting process. It is commonly specified for corrosion-resistant applications involving exposure to salt solutions, sea water, mild acids, alkalis, and oil field liquids, both sweet and sour. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: CI-95. Producer or source: Charter Dura-Bar, Inc.

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. Brinell hardness values in Table 3 corrected September 2022. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

ACO Eurobar EN-GJL-300C (5.1308) is a higher-tensile-strength gray cast iron that is produced by the continuous casting process. It provides a combination of high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on wear resistance as well as heat treating and machining. Filing Code: CI-99. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

ACO Eurobar EN-GJS-350-22C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%, and it is specifically designed to provide good impact properties at low temperature. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating. Filing Code: CI-101. Producer or source: ACO Eurobar GmbH.

ACO Eurobar EN-GJS-350-22C is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%. It is specifically designed for applications where tensile strength is less important than the impact and elongation properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-102. Producer or source: ACO Eurobar GmbH.

ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

DUCTILE IRON is a high carbon ferrous material having high strength, high ductility, toughness, good castability and ready machinability. It is a family of materials and is produced in six different commercial types providing various combinations of strength, ductility and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on heat treating, machining, and joining. Filing Code: CI-16. Producer or source: International Nickel Company Inc..

PEARLITIC MALLEABLE IRON is a high strength cast iron recommended for dependable service, strength and machinability in highly stressed parts at work in mobile and stationary mechanisms. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CI-26. Producer or source: Albian Malleable Iron Company.

SORBO-MAT DUCTILE IRON is a high-carbon ferrous material. It is produced in five varieties providing various combinations of strength and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-37. Producer or source: Sorbo-Mat Process Corporation.

DURA-BAR G1A alloyed iron is engineered for the glass mold industry. It is produced by continuous casting which results in fine graphite flake size and size and fine matrix structure. This datasheet provides information on composition, microstructure, and hardness. It also includes information on heat treating and machining. Filing Code: CI-61. Producer or source: Federal Bronze Products Inc..

Meehanite GB300 is a pearlitic gray cast iron that has a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. This grade exhibits high strength while still maintaining good thermal conductivity and good machinability. It is generally used for applications where the thermal conductivity requirements preclude the use of other higher-strength materials, such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fatigue. It also includes information on low and high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-75. Producer or source: Meehanite Metal Corporation.

ISO 185/JL/250 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 250–350 MPa (36–51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/250 contains lower carbon and silicon contents and has superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-76. Producer or source: ISO Central Secretariat.