STOODY 4 is a cobalt-chromium-tungsten alloy with excellent high-temperature strength and excellent resistance to corrosion. This alloy derives its high-temperature strength from the high tungsten-to-carbon ratio which allows a large percentage of tungsten to remain in solid solution. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-75. Producer or source: WRAP Division, Stoody Company.

Copper Alloy No. C813000 is a cast copper-base alloy containing nominally 0.8% cobalt and 0.06% beryllium. Thus it is a beryllium-modified copper-cobalt alloy. Because of its beryllium content, its manufacture may present a health hazard. C81300 is a precipitation-hardenable alloy with moderate hardness and strength. It has fairly good thermal and electrical conductivities. It is used for electrical and thermal conductors where moderate hardness is sufficient but is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-508. Producer or source: Copper alloy foundries.

TRIBALOY T-800 consists of a hard, intermetallic phase in a softer, cobalt-base alloy matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder Metallurgy) processing. It has excellent resistance to crevice corrosion and it is less susceptible to stress-corrosion cracking than the austenitic stainless steels. T-800 combines outstanding resistance to corrosion and wear in numerous commercial environments. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Co-73. Producer or source: Tribaloy Products.

TRIBALOY T-700 consists of a hard, intermetallic phase in a softer, nickel-base matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder/Metallurgy) processing. It combines outstanding wear and corrosion resistance for use in pumps, extruders, bearings, mixers and particularly elements of nuclear reactors. It has excellent resistance to wear in liquid sodiium. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion and wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: Ni-221. Producer or source: E. I. DuPont de Nemours & Company Inc..

BIO-DUR CARPENTER CCM ALLOY is a high nitrogen, low carbon wrought version of ASTM F75 cast alloy and used in the orthopedic implant industry. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: CO-96. Producer or source: Carpenter.

RED CUT COBALT steel is made by adding 5% cobalt to the conventional 18% tungsten -4% chromium-1% vanadium high-speed steel. Cobalt increases hot or red hardness and thus enables the tool to maintain a higher hardness at elevated temperatures. This steel is best adapted for hogging cuts or where the temperature of the cutting point of the tool in increased greatly. It is well adapted for tools to be used for reaming cast-iron engine cylinders, turning alloy steel or cast iron and cutting nonferrous alloys at high speeds. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-367. Producer or source: Teledyne Vasco.

Deloro Stellite 25 is a cobalt-chromium-tungsten-nickel alloy. This tungsten strengthened cobalt-chromium alloy is the cast version of the wrought cobalt-base alloy L605. Deloro Stellite 25 is resistant to wear, galling, and corrosion and retains this resistance at high temperatures. Its exceptional wear resistance is due mainly to the unique inherent characteristics of the hard carbide phase dispersed in a CoCr alloy matrix. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining. Filing Code: Co-142. Producer or source: Deloro Wear Solutions GmbH.

AISI Type T4 is made by adding 5% cobalt to the conventional 18% tungsten-4% chromium-1% vanadium (AISI Type T1) tool steel. The cobalt dissolves in the ferrite and strengthens the matrix of the steel whereas the other alloying elements form carbides. Thus the cobalt increases the hot or red hardness, thereby enabling the tool to maintain a higher hardness at elevated temperatures. Type T4 is well adapted for cutting hard, gritty materials such as cast iron or other abrasive materials and for cutting nonferrous alloys at high speeds. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-395. Producer or source: Tool steel mills.

BRUSH CASTING ALLOYS 275C AND 275CT are beryllium copper alloys of very high strength with cobalt and silicon as the secondary alloying elements. Use is in the age-hardened temper. Brush casting alloy 275CT is the fine-grained version. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-537. Producer or source: Brush Wellman Inc.. Originally published as Brush Wellman Alloy 275C, 275CT, April 1988, revised December 1992.

BRUSH CASTING ALLOYS 165C AND 165CT are beryllium copper alloys of high strength with cobalt as the second alloying element (0.20 to 0.65% Co). Use is in the age-hardened temper. Brush casting alloy 165CT is the fine-grained version. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Cu-576. Producer or source: Brush Wellman Inc..

BRUSH CASTING ALLOYS 245C AND 245CT are beryllium copper (2.25-2.55% Be) alloys of high strength with cobalt as the second alloying element (0.35-0.70% Co). Use is in the age-hardened temper. Brush casting alloy 245CT is the fine-grained version. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Cu-577. Producer or source: Brush Wellman Inc..

BRUSH CASTING ALLOYS 20C AND 20CT are beryllium copper alloys (1.90-2.15% Be) of very high strength with cobalt as the second alloying element (0.35 to 0.70% Co). Use is in the age-hardened temper. Brush casting alloy 20CT is the fine-grained version. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: CU-581. Producer or source: Brush Wellman Inc.

Copper Alloy No. 993 is a copper-nickel-aluminum-cobalt alloy with unusually good heat-resisting properties. It was developed for use in molds for glass containers and also is used for sheet-glass rolls. Compared to cast-iron (the alloy commonly used for molds), Copper Alloy No. 993 has four outstanding advantages: (1) high thermal conductivity, (2) high hardness, (3) high resistance to oxidation and (4) good dimensional stability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, and machining. Filing Code: Cu-338. Producer or source: Copper alloy foundries.

BRUSH CASTING ALLOY 21C is a beryllium copper alloy of high strength with cobalt as the second alloying element (1.0 to 2.0% Co). Use is in age-hardened temper. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Cu-575. Producer or source: Brush Wellman Inc..

AMPCOLOY 570 is a cast copper-nickel-aluminum-cobalt-iron alloy specially developed for applications involving severe stresses and high temperatures, such as glass-making molds and plate-glass rolls. It is significantly superior to cast iron which has been commonly used for glass-making molds. Good foundry techniques will yield high-quality castings of Ampcoloy 570 in a wide range of section sizes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-392. Producer or source: Ampco Metal Inc..

ALX is a composition of nonferrous materials with a cobalt base containing chromium, tungsten and carbon. This alloy is commonly supplied in the cast-to-shape form, having an as-cast hardness of Rockwell C60-62 and requiring no further heat treatment. ALX is also supplied as cast tool bit material and is useful where conventional high-speed steels or carbides do not function effectively. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, and machining. Filing Code: Co-35. Producer or source: Allegheny Ludlum Corporation.

Haynes Alloy No. 152 is a cobalt-base, high-temperature casting alloy. It is designed for gas-turbine components requiring high strength properties in the 1000 to 2000 F temperature range. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-40. Producer or source: Union Carbide Corporation, Stellite Division.

MAR-M Alloy 322 is a cobalt-base casting alloy characterized by exceptional high temperature strength, good ductility, and oxidation resistance throughout its operating range of 1400-2000 F. It is recommended for turbine vanes and blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Co-45. Producer or source: Martin Metals Division, Martin Marietta Corporation.

Waimet WI-52 is a cobalt-base high-tungsten alloy recommended for high temperature castings. It has high strength with good ductility and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-26. Producer or source: Waimet Alloys Company.

UCI-270 is a cast, cobalt and tungsten stabilized, nickel-chromium-iron alloy having unequaled performance in high-temperature applications to 2300 F (1260 C). Among its many uses are components for heat-treating furnaces, cement kilns, petrochemical furnace tubes, and refining furnace tubes. This datasheet provides information on composition, physical properties, and hardness as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-696. Producer or source: Ultra-Cast Inc.