SAE 4820 is a low-carbon (nominally 0.20%) carburizing steel containing nominally 3.5% nickel and 0.25% molybdenum. It is deal for used that require a strong, tough core along with a highly wear-resistant carburized case. In addition, it offers a good combination of strength and low-temperature toughness for non-carburized applications. It is recommended for a wide range of moderately heavy-duty applications. Among its many uses are carburized gears, carburized aerospace components and non-carburized machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-409. Producer or source: Alloy steel mills and foundries.

AISI 1017 is a carbon steel with a relatively low manganese content (0.30-0.60%); this contributes to relatively low hardenability in all applications and increased ductility with decreased hardness and strength in the core of carburized material and in uncarburized uses. It combines good hot and cold workability, good machinability and good weldability. Typical applications are carburized parts, bolts, trusses and cold-extruded parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-109. Producer or source: Carbon steel mills.

AISI 1522 is a low-carbon steel that combines good workability, good machinability and good weldability. It is used in the hot-rolled, annealed, normalized or water-quenched-and-tempered condition for a variety of applications. It also is used for parts case-hardened by carburizing. It has a relatively high manganese content; this provides increased hardenability which is reflected in all uses and gives increased strength and hardness in the core of carburized parts and in sections and components that have not been carburized. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-111. Producer or source: Carbon steel mills.

SAE 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-119. Producer or source: Carbon steel mills.

UNS G10210 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-122. Producer or source: Carbon steel mills.

UNS H51200 is a low-carbon, low-chromium carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant case is sufficient. It has medium hardenability and it can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-434. Producer or source: Alloy steel mills and foundries.

UNS G10260 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. It has relatively high manganese (0.60-0.90%); this provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-123. Producer or source: Carbon steel mills.

GearMet C69 possesses surface properties superior to those of conventional gear steels with the advantage of a flaw tolerant core. These surface properties allow either higher contact stresses at an equivalent life, thus reducing the gear size, or significantly longer wear life at the same contact stress when compared to existing carburized gear steels. This datasheet provides information on composition and hardness as well as fatigue. It also includes information on wear resistance as well as heat treating. Filing Code: SA-500. Producer or source: QuesTek Innovations, LLC.

COPPER Alloy No. 770 is a spring quality copper-nickel zinc alloy having high resistance to corrosion. It is recommended primarily for optical goods, springs, resistance wire, hardware and similar products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-185. Producer or source: Copper and copper alloy mills.

SAE 4626 is a carburizing alloy steel suitable for producing case-hardened parts, such as gears, pinions and camshafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-253. Producer or source: Alloy steel mills and foundries.

U. S. S. SUPERKORE comprises a series of six low alloy, deep hardening carburizing steels that have shown hardenability equal to or slightly greater than the conventional alloy steels which they are designed to replace, as shown under General Characteristics. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: SA-10. Producer or source: United States Steel Corporation.

AISI E3310 is a chromium-nickel carburizing steel having exceptionally high hardenability. It is suited for heavy duty parts which must have high surface hardness combined with a strong and tough core. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-35. Producer or source: Alloy steel mills and foundries.

AISI 3120 is a low-carbon, chromium-nickel case-hardening steel offering good toughness and shock resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-97. Producer or source: Alloy steel mills and foundries.

AISI C1117 is a low-carbon free-machining case-hardening steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: CS-14. Producer or source: Carbon and alloy steel mills.

Latrobe AGT Vac-Arc is a chromium-nickel-molybdenum alloy case hardening steel of superior cleanliness and uniform quality, recommended where high tensile and fatigue strengths are required with high shock resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-130. Producer or source: Latrobe Steel Company.

AISI 8720 is a low alloy carburizing steel capable of producing high core strength and toughness. It is recommended for shock resistant machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-211. Producer or source: Alloy steel mills and foundries.

AISI 4815 is a low-carbon, nickel-molybdenum carburizing steel. It is recommended for applications requiring a strong, tough core combined with a highly wear-resistant carburized case. It also offers a good combination of strength and low-temperature toughness for non-carburizing applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-259. Producer or source: Alloy steel mills and foundries.

The 5 Ni-025 Mo Steel is a carburizing steel designed for heavy-duty service. It possesses materially higher hardenability in both case and core than any other commercially available carburizing steel free from the processing difficulties associated with the formation of massive chromium carbides. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-268. Producer or source: Copperweld Steel Company.

AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-47. Producer or source: Carbon and alloy steel mills.

AISI 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-48. Producer or source: Carbon steel mills.