Wieland-K32 is a nondeoxidized copper with acceptable electrical and thermal conductivities. It is often called electrolytic tough pitch copper. Typical applications include wrapping strip for power cables and for coaxial telephone cables in electrical engineering. This datasheet provides information on composition, physical properties, elasticity, and bend strength. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: CU-728. Producer or source: Wieland Metals Inc.

CRUCIBLE XM 19 Stainless is a nitrogen-strengthened, low-carbon austenitic stainless steel that provides good corrosion resistance in combination with high strength. The alloy has better corrosion resistance than AISI Type 316 with approximately twice the yield strength. It can be welded, machined and cold worked using the same equipment and methods used for the conventional AISI 300 series stainless steels. It is nonmagnetic as annealed and after severe cold work. Its many uses include cables, fasteners, pumps, valves, marine hardware and springs. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-414. Producer or source: Crucible Specialty Metals Division, Colt Industries.

CARPENTER STAINLESS TYPE 302 is one of the most widely used of the chromium-nickel stainless and heat-resisting steels. In the annealed condition it is austenitic, non-magnetic, extremely tough and ductile and it has excellent resistance to corrosion. Among its many uses are springs, woven screens, cables, salt-water fishing tackle, thermometers and camera parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-443. Producer or source: Carpenter.

Copper Alloy No. C19200 is a high-copper alloy with relatively high strength and electrical conductivity. It has good hot forgeability and good capacity for being cold worked. Among its many uses are applications requiring resistance to softening and stress corrosion, automotive hydraulic brake lines, cable wrap, eyelets, flexible hose and fuse clips. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-485. Producer or source: Copper and copper alloy mills.

Copper Alloy NO. 182 is an age-hardening type of alloy that combines relatively high electrical conductivity with good strength and hardness. It was formerly known as Chromium Copper and its applications include such uses as resistance-welding-machine electrodes, switch contacts and cable connectors. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-305. Producer or source: Copper and copper alloy mills.

NJZ Alloy No. 45 is a zinc-copper alloy characterized by high hardness and strength, good ductility and high stiffness. It work hardens easily. Among its many applications are hardware, sporting-equipment components, cable wrappings and watch cases. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-25. Producer or source: New Jersey Zinc Company.

CDA COPPER 109 is a boron-deoxidized copper with excellent hot and cold working properties and excellent electrical conductivity. It responds to most common fabricating techniques and is used mostly for electrical and electronic applications, such as bus bars and conductors, cable shielding, waveguides, switchgear, heatsinks, lead frames, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-226. Producer or source: Anaconda American Brass Company.

CONSIL 995 is an air-hardenable silver-base alloy having high strength and high electrical conductivity. It does not soften as a result of being heated as in brazing. It is recommended for electrical contacts, cable connectors, spring clips, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ag-4. Producer or source: Handy & Harman.

EVERDUR-637 is a high-strength, corrosion resistant copper alloy containing silicon and aluminum. It is also characterized by its good forging and machining qualities. It is recommended for fasteners, valve stems, marine hardware, cable connectors, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-183. Producer or source: Anaconda American Brass Company.

NICROBELL alloys were developed to be compatible with and complimentary to the thermoelectric conductors used for thermocouples and other conducting cables. This datasheet provides information on composition and physical properties. Filing Code: Ni-453. Producer or source: Nicrobell Pty Ltd.

Sandvik Sanicro 36Mo is a corrosion resistant grade (CRA) available as wire for service in extremely sour oil and gas wells. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming. Filing Code: SS-1172. Producer or source: Sandvik Steel Company.

ANTIMONIAL LEAD ALLOYS are binary alloys containing from 1 to 12% antimony, balance lead. They are also called HARD LEAD, the antimony being used to increase the hardness and strength of lead. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, and joining. Filing Code: Pb-9. Producer or source: Lead producers.

KME Cu-HCP is a phosphorus-deoxidized copper that contains a minimum of 99.95% copper and low residual phosphorus. It has very high electrical conductivity, and may be heat-treated, welded, or brazed without the need for special precautions to avoid hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-930. Producer or source: KME Germany GmbH.

KME Cu-PHC is a phosphorus-deoxidized copper that contains a minimum of 99.95% copper and low residual phosphorus. It has very high thermal and electrical conductivity, and good welding and soldering properties. The electrical conductivity of KME Cu-PHC is higher than that of Cu-HCP. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-937. Producer or source: KME Germany GmbH.

INCOLOY ALLOY 908 is a nickel-iron alloy developed for applications in the advanced TOKAMAK reactor ITER. The alloy contains no cobalt, a small level of chromium to resist stress assisted grain boundary oxidation (SAGBO) and is stabilized with Cb(Nb), Ti, and Al. This datasheet provides information on composition and tensile properties. It also includes information on heat treating. Filing Code: Ni-446. Producer or source: Inco Alloys International Inc.

Wieland-K12 and K14 are copper alloys used for applications needing good electrical conductivity. Weldability of the two alloys is slightly different. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming and joining. Filing Code: CU-689. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

AL Tech 6X is an austenitie (non-magnetic) alloy developed for service in pitting environments containing chlorides. It was designed for resistance to pitting and crevice corrosion encountered in seawater, pulp and paper manufacture, petroleum refineries, chemical process equipment and sour oil-well components. Alloy 6X also provides good resistance to general corrosion in a number of media. It possesses good ductility, high impact values and good weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-376. Producer or source: AL Tech Specialty Steel Corporation.

EIGILOY is a cobalt-base alloy that is characterized by high tensile and fatigue strength and good corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-4. Producer or source: Elgiloy Company. Originally published August 1953, revised November 1971.

Wieland K09 is an oxygen-free copper with excellent electrical conductivity. It is often used when good weldability and hard soldering capabilities are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-659. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

Aurubis Cu-PHC is a deoxidized, oxygen-free copper with a very low residual phosphorus content. It combines good electrical conductivity with excellent hot and cold formability and excellent joining characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Cu-915. Producer or source: Aurubis AG.