Copper Alloy No. C93700 is a cast bronze with relatively low strength, good machinability and good corrosion resistance. Commercial names formerly used (not recommended) are (1) High-Leaded Tin Bronze, (2) Ingot No. 305, (3) Bushing and Bearing Bronze and (4) 80-10-10. Its many applications include bearings, bushings, impellers and pressure-tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-421. Producer or source: Copper alloy foundries.

AL TECH 440C is a martensitic stainless steel of high carbon and chromium content capable of full hardening response after oil quenching or air cooling. The outstanding wear resistance of 440C combined with its moderately good corrosion resistance make it an excellent candidate for bearings, bushings, valve components, cutlery and pump parts. Designers may also consider Type 440C vacuum are remelted (VAR) for aerospace and small precision bearings. In these applications improved cleanliness, superior fatigue properties, high strength and corrosion resistance are critical design considerations. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-550. Producer or source: AL Tech Specialty Steel Corporation.

NICKELDUR is a leaded nickel bronze with superior corrosion resistance. It is recommended for pump liners, bearings, bushings and similar applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-142. Producer or source: Janney Cylinder Company.

Lumen 97 is a heat treatable aluminum bronze having high hardness coupled with sufficient ductility suitable for gears, bushings and bearings subjected to heavy pressures and excessive wear. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-159. Producer or source: Lumen Bearing Company.

AMS 4880-C95510 is a nickel-aluminum bronze casting useful for bushings and bearings. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on machining. Filing Code: Cu-895. Producer or source: Concast Metal Products Company.

NITRALLOY 225 is a special alloy steel which can be nitrided, that is, surface hardened, without final quenching, by the action of ammonia gas at relatively low temperatures. It is used for pump shafts, bearing bushings, connecting rods, press rolls, steam valves, sreel stamping dies. and hot work and wire drawing dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-48. Producer or source: Alloy steel mills and foundries.

Crucible 154 CM is a hardenable chromium stainless steel with molybdenum to improve hot hardness and corrosion resistance. Typical applications include bushings and bearings where high hardness is needed. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-737. Producer or source: Crucible Service Centers.

CMW 353 alloy is a Ni-Si-Cr-Cu high-strength high-conductivity alloy. It has high hardness combined with toughness. This combination gives the alloy excellent wear resistance and makes it useful for flash welding dies, back-up bars, and bushings in current-carrying bearings when used in combination with CMW 3 (see Alloy Digest Cu-85, August 2000) shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: CU-656. Producer or source: CMW Inc.

Copper Alloy No. C82000 is an age-hardenable copper-base casting alloy containing nominally 0.6% beryllium. Its common name is Beryllium Copper Casting Alloy 10C. It offers fairly high strength and moderate ductility with good resistance to corrosion. Its applications include bearings and bushings, current-carrying parts, contacts and switch blades, resistance-welding tips and soldering-iron tips. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-523. Producer or source: Copper alloy foundries.

CARPENTER O6 is an oil-hardening tool steel for cold-work applications. It is designed to have free graphite in the microstructure. This free graphite is responsible for the excellent machinability of this grade. Among the many applications of Carpenter O6 are dies for various uses, punches, gages, bushings, mandrels, pneumatic hammers, stamps, taps, rotary slitting cutters and wear plates. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-480. Producer or source: Carpenter.

BUNTING Alloy 72 is a cast bushing and bearing bronze with excellent load capacity and anti-friction qualities. It is used in a wide variety of industrial and automotive equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-269. Producer or source: Bunting Brass & Bronze Company.

Copper Alloy No. 411 is brass with a small addition of tin. It has good formability, weldability and corrosion resistance and is recommended for such applications as bearings, bushings, jewelry and stamped hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-296. Producer or source: Brass mills.

AMPCOLOY 83 is a wrought copper-base alloy containing nominally 1.8% beryllium. It offers good formability in the unhardened condition and can be strengthened by precipitation hardening. It has a combination of high strength and hardness, good ductility, good electrical and thermal conductivity, excellent resistance to wear and fatigue, and high resistance to general corrosion. Among its many uses are components for resistance welding, bushings and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-310. Producer or source: Ampco Metal Inc..

Bethlehem Lukens Plate (BLP) C1119/C1144 Modified steels are resulfurized carbon steels containing nominally 1.15% Mn and 0.20 to 0.33% S to provide a free-machining steel. They are recommended especially for high-production automatic machining. They have relatively low hardenability. Their ductility and toughness are reasonably good in the longitudinal direction, but they tend to be low in the transverse direction. The many uses include mining equipment, bushings, bolts, and gears. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: SA-436. Producer or source: International Steel Group Inc. Originally published February 1989, revised February 2004.

MoldStar 18 has good bearing qualities and has resistance to wear, abrasion, fatigue, deformation, and corrosion. MoldStar 21 and 22 are harder alloys and also have good bearing qualities and resistance to wear, abrasion, fatigue, deformation, and corrosion. This family of aluminum bronzes is used as wear plates, sleeve bearings, and guide pin bushings. MoldStar 18 is also known as PAS 18. This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength. Filing Code: CU-733. Producer or source: Performance Alloys.

AMPCO METAL 20 is an aluminum bronze having high hardness coupled with sufficient ductility suitable for bushings and bearings subjected to heavy presssures and excessive wear. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Cu-47. Producer or source: Ampco Metal Inc..

NM-100 STEEL is a wrought, highly alloyed martensitic steel having excellent wear and corrosion resistance at temperatures up to 1100 F. It is recommended for high temperature bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-231. Producer or source: Whittaker Corporation, Nuclear Metals Division.

HOWMET No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. It is recommended for bushings, scrapers, valve parts, and other machinery components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-56. Producer or source: Howmet Corporation Metal Products Division.

Dargraph is an oil-hardening, graphitic steel having excellent resistance to abrasive wear, galling, scuffing and scoring. It is recommended for drawing and forming dies, bushings, pneumatic hammers, wear plates, etc. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-216. Producer or source: Darwin & Milner Inc..

Ampcoloy 666 is a manganese-bronze alloy developed for long wearing applications in bushings, gears, cams, etc. It has good non-galling characteristics, good corrosion resistance, and good mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-197. Producer or source: Ampco Metal Inc..