Kaiser Aluminum alloy 2011 is one of the most popular screw machine stock alloys available. Tennalum, a division of Kaiser Aluminum, produces alloy 2011 in the T3 temper as Microchip II, which offers excellent machinability and surface finish. The chips from Tennalum’s Microchip II (T3 temper only) are known for being small in size. Alloy 2011 is typically used in connectors and fittings, brake pistons, computer parts, knobs, and meter shafts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-352. Producer or source: Kaiser Aluminum Corporation.

Kaiser Aluminum alloy 6061 has excellent joining characteristics and good acceptance of coatings (anodizing response). It is used in applications where weldability and corrosion resistance are needed. The alloy is typically used in fittings, brake pistons, computer parts, couplings, and valves. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-360. Producer or source: Tennalum, A Division of Kaiser Aluminum. Originally published March 1999, corrected October 1999.

UltrAlloy is a lead-free, enhanced machining product with the inherent benefits of a 6xxx-series alloy. The alloy is produced as a cold-finished rod and bar with strength levels comparable to 6262. The alloy is registered with the Aluminum Association as X6020. This datasheet provides information on composition, microstructure, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-340. Producer or source: ALCOA Wire, Rod & Bar Division. Originally published September 1996, corrected December 1996.

Alcoa 6262 alloy has good machinability with high strength, high corrosion resistance, excellent surface finish, and applied coating acceptance. The T8 temper offers excellent residual stress control. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining, joining, and surface treatment. Filing Code: AL-351. Producer or source: ALCOA Wire, Rod & Bar Division.

Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

UGI 4418 AIR is a martensitic stainless steel with strong corrosion resistance and mechanical performance. It is used for parts requiring a combination of high strength and high toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-1296. Producer or source: Schmolz + Bickenbach USA Inc..

Dura-Bar GX is a heat-treatable, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of moderate strength, good wear resistance, and good vibration damping capacity. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-83. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar G2S is a high strength, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of superior hardenability, strength, and creep resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-80. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar G2 is a gray cast iron bar is used for continuous cast products. It is a good fit for a variety of applications due to its good machinability, wear resistance, and vibration damping properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining. Filing Code: CI-65. Producer or source: Charter Dura-Bar, Inc.

RED X-20 is a heat treatable hypereutectic aluminum-silicon alloy with excellent wear resistance and a very low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-89. Producer or source: Apex Smelting Company.

Dura-Bar G2P is a pearlitic gray cast iron that is used for continuous cast products. It was developed to best suit flame and induction hardening. G2P is made with a substantial amount of pearlite in the rim. This requires the least amount of stock removal for achieving a heat-treatable surface. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on machining. Filing Code: CI-68. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar 80-55-06 is a ferritic-pearlitic ductile iron that is used for continuous cast products. It offers higher strength and wear resistance when compared to Dura-Bar 65-45-12, while still possessing good machinability and surface finish. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on heat treating and machining. Filing Code: CI-71. Producer or source: Charter Dura-Bar, Inc.

DUCTALLOY is a high-carbon ferrous material having high strength, high ductility, toughness and machinability. It is supplied in three grades: pearlitic grade 80, ferritic grade 60, and austenitic grade A50. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-14. Producer or source: American Brake Shoe Company.

TRIBALOY T-800 consists of a hard, intermetallic phase in a softer, cobalt-base alloy matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder Metallurgy) processing. It has excellent resistance to crevice corrosion and it is less susceptible to stress-corrosion cracking than the austenitic stainless steels. T-800 combines outstanding resistance to corrosion and wear in numerous commercial environments. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Co-73. Producer or source: Tribaloy Products.

TORMANC SPECIAL is a low-carbon manganese-nickel-molybdenum steel for locomotive parts, railway and general engineering purposes. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-124. Producer or source: Samuel Fox & Company Ltd, Stocksbridge Works.

Hidurel 5 is a precipitation-hardening copper-nickel-silicon bronze alloy with high conductivity and strength, corrosion resistance to marine environments and hydrogen embrittlement, and good antifrictional properties. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on machining. Filing Code: CU-607. Producer or source: Langley Alloys Ltd.

ISO 185/JL/250 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 250–350 MPa (36–51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/250 contains lower carbon and silicon contents and has superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-76. Producer or source: ISO Central Secretariat.

ISO 185/JL/200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi) when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, 185/JL/200 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-70. Producer or source: International Organization for Standardization.

ISO 185/JL/225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 225–325 MPa (33-47 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on heat treating. Filing Code: CI-73. Producer or source: International Organization for Standardization (ISO).

METCO 505 is a high-molybdenum powder designed to produce plasma flame spray coatings for use as hard bearing surfaces with low coefficient of friction and for resisting wear by abrasive grains or hard surfaces. Its coatings have excellent non-scuffing properties and are compatible with many mating materials, particularly cast iron and iron-base alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as surface treatment. Filing Code: Mo-12. Producer or source: Metco Inc..