Strenx 1100 is a structural steel that guarantees a minimum yield strength of 1100 MPa (160 ksi). Strenx 1100 provides a good combination of strength and toughness together with excellent workshop properties. Typical applications include load-bearing structures, where low weight is needed. Despite its strength, the material is easy to weld and bend. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-834. Producer or source: SSAB Swedish Steel Inc..

SILICON CARBIDE SC-221 is a beta-phase silicon carbide made from the pressureless sintering method. It possesses excellent mechanical strength at high temperature (4-point bending strength of 71ksi [490 MPa] at 1400 C [2552 F]). This datasheet provides information on physical properties, hardness, elasticity, and bend strength as well as fracture toughness. Filing Code: Cer-5. Producer or source: Kyocera America Inc..

RUUKKI LASER 250C is a structural steel that was developed to be easy to cut, weld, and bend. It is optimized for laser cutting in particular. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-164. Producer or source: Rautaruukki Corporation.

Dillidur 450V is a water hardened wear-resistant steel with surface hardness at room temperature of 420-480 HB. The steel is easy to weld and bend. Hot working is not recommended. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-638. Producer or source: Dillinger Hütte GTS.

ULTRONZE is a copper alloy also known as Olin Alloy 654. It bridges the gap between standard high-performance copper alloys and beryllium-copper alloys, thus enabling the design of parts with properties previously only attainable with more expensive materials. The alloy has superior stress-relaxation characteristics, good bend performance and excellent corrosion resistance. Among its typical uses are electrical connectors, fuse clips and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-417. Producer or source: Olin Brass.

Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

Optim 1100 QC (1100 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-183. Producer or source: Rautaruukki Corporation.

Strenx Section 900 is a cold-formed steel section made of hot-rolled, high-strength steel with a minimum yield strength of 900 MPa (131 ksi). Its high strength combined with naturally stiff form enables construction of stronger and lighter structures. The common shape is a U-bend channel. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-792. Producer or source: SSAB Swedish Steel Inc..

Alloy KHP 151 (UNS C15100) is a high performance copper alloy with very high conductivity. Typical uses include lead frames for high-power electronic circuits, connectors, and switchblade jaws; and applications requiring high conductivity, moderate strength, good bend formability and good stress relaxation resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-863. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

KME Cu-ETP (electrolytic tough pitch copper) is an electrolytically refined, high conductivity copper that contains a minimum of 99.90% Cu and a controlled amount of oxygen in the form of Cu2O. It has a minimum electrical conductivity of 100% IACS. Cu-ETP is the most widely used grade of copper in electrical applications all over the world and represents over half of global copper use. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fatigue. It also includes information on heat treating. Filing Code: Cu-913. Producer or source: KME Germany GmbH.

Atlas 5052 is a wrought, non-heat-treatable, Al-2.5Mg-0.25Cr alloy (5xxx series) that offers an attractive combination of moderate strength, good formability and weldability, and excellent corrosion resistance particularly in marine atmospheres. It is also very easy to anodize, providing a pleasant matte finish. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-470. Producer or source: Atlas Steels.

SSAB Ramor 400 is a low-carbon, chromium-molybdenum-nickel-boron alloy protection steel that is used in the heat treated condition (Hardness = 360–460 HBW) for blast protection. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, machining, and joining. Filing Code: SA-876. Producer or source: SSAB AB.

CEN EN-GJL-200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, CEN EN-GJL-200 contains lower carbon and silicon contents and exhibits superior wear properties, while still maintaining good thermal conductivity, good damping capacity, and good machinability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on casting, heat treating, and machining. Filing Code: CI-96. Producer or source: European Committee for Standardization (CEN).

Atlas 5083 is a non-heat-treatable, Al-4.5Mg-0.7Mn-0.15Cr alloy that is known for exceptional performance in extreme environments. It is highly resistant to attack by both seawater and industrial chemicals. Atlas 5083 has the highest strength of the non-heat-treatable alloys but is not recommended for use at temperatures in excess of 65 °C (150 °F). It retains exceptional strength after welding. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-468. Producer or source: Atlas Steels.

THYRAPID PT 15 ESH is a high-speed tool steel made by the rapid solidification of powder followed by Electro Slag Heating. The high carbon, vanadium and tungsten contents augment high wear resistance and good toughness while cobalt imparts good red hardness This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on heat treating and machining. Filing Code: TS-537. Producer or source: Thyssen Specialty Steels Inc.

THYRAPID PM4 HS is a high carbon, vanadium alloyed steel with an addition of sulfur (0.20-0.25%) to aid in the machining of large bars. The material is produced by the rapid solidification process to eliminate normal sulfide stringers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-538. Producer or source: Thyssen Specialty Steels Inc.

THYRAPID PM4 ESH is manufactured by the rapid solidification of powder and augmented by Electro Slag Heating. Good wear resistance and toughness lead to cold work punch and die applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-539. Producer or source: Thyssen Specialty Steels Inc.

SP 700 is a high strength, beta-rich alpha-beta titanium alloy. It was developed with the following attributes: (1) excellent hot- and cold-workability; (2) enhanced hardenability with a wide range of mechanical properties that can be obtained by heat treatment; and (3) superior superplastic behavior at low temperature (around 1050 K). This datasheet provides information on composition, physical properties, microstructure, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance as well as heat treating. Filing Code: TI-107. Producer or source: NKK Corporation.

Nitronic 19D is an alloy with a mixed ferrite and austenite microstructure. The alloy provides a good compromise of strength, formability, and economy with slightly less corrosion resistance than the reference duplex alloy 2205 (see Alloy Digest SS-462, August 1985). This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as deformation and fatigue. It also includes information on high temperature performance as well as forming, machining, and joining. Filing Code: SS-661. Producer or source: Armco International Sales.

Vanadis 23 is a high-performance tool steel produced from superclean molten steel, which is then atomized to powder. The alloy is characterized by uniformly distributed carbide particles that help in its good mechanical properties, toughness, and bend strength. Vanadis 23 is recommended for mixed-wear (abrasive and adhesive) resistance and high compressive strength. This datasheet provides information on composition, and microstructure. It also includes information on heat treating, machining, and joining. Filing Code: TS-552. Producer or source: Uddeholm Corporation. See also Alloy Digest TS-561, October 1998.